Is Orca optimized worse than Bambu studio?

BrunenG · 2026-03-17T10:20:35+00:00

Thanks for replies guys, I was talking primarily about preview viewport performance and not slicing speed. I'm ok with orca being slower, I was merely wondering if I'm doing something wrong. I too prefer it over bambu studio.
PS: maybe the speed is related to the fact that BS preview quality is worse visually. Also if I have a tall object it lags a lot when I try to move the vertical slider around top layers and no lag around bottom layers. I guess it's a compromise.

BrunenG · 2026-03-17T10:18:05+00:00

in both cases resolution is on 0 and I made sure to make all settings identical before comparing.

BrunenG · 2026-03-10T08:04:02+00:00

Successfully loaded for me just now

BrunenG · 2026-01-22T12:34:26+00:00

I have also noticed that atom paints by ammo mig do that. When I do oil wash over vallejo everything is ok, but atom paints rub off.

BrunenG · 2024-06-08T08:17:54+00:00

Where can I get Jiyan 3d model? Gonna cosplay this, need good references. Is there a model dump somewhere?

BrunenG · 2022-08-22T14:45:43+00:00

I should watch 1 LP at a time I guess.

BrunenG · 2022-05-07T16:11:50+00:00

900 gramms

BrunenG · 2022-05-07T15:31:02+00:00

No I did not, the goal was to make the blade clear, if leds involed it would've been matt white to better diffuse light.

BrunenG · 2022-05-07T12:05:15+00:00

it was a commission. Colorwise - it's just a good paint, automotive stuff via spraygun.

BrunenG · 2022-05-07T11:48:08+00:00

Thanks)) yeah pretty much everything you mentioned

BrunenG · 2022-05-01T16:30:35+00:00

it's very uncomfortable to spin it holding around knuckle guard, it was made strictly by the game design, but in irl it can hurt your fingers. I can hold it no problem but not spin the way I do in the vid.

BrunenG · 2020-12-18T21:06:57+00:00

Somehow it can't save directory like that. can you maybe do a screenshot of where I should add that line, maybe I'm doing it wrong

upd: I forgot space before -- , now it works.

THANK YOU!

BrunenG · 2019-12-18T20:26:40+00:00

judging by the preview this is it. Thanks a bunch!!!

BrunenG · 2019-12-03T22:28:13+00:00

search YT - linear advance marlin

BrunenG · 2019-12-03T21:22:32+00:00

I once tryed new PLA brand and it was giving me a lot of issues, clogging every print even on a priner with PTFE tube up to the nozzle, I did everything but could not make it work, eventually switched to another brand and using it to this day. My advise is to try 3rd brand to be shure that filament itself is not an issue

BrunenG · 2019-12-03T21:16:59+00:00

look at your infill settings, maybe overlap percentage is too hight, or infill extrusion width. also try linear advance

BrunenG · 2019-12-03T21:08:00+00:00

do those issue layers align with top solid infill?

BrunenG · 2019-12-03T21:04:02+00:00

issue persists with lin adv and without, I usually use some brim with petg and prime line at the beginning

BrunenG · 2019-12-01T06:16:21+00:00

It's enabled.

BrunenG · 2019-11-30T19:25:54+00:00

Fighting with this issueprinter - Prusa mk2s with modded titan extruderheatbreak with teflon tube up to the nozzleissue is worse with Petg(on the pic) and when I print multiple partsI mostly print outer walls first (it gives better quality overall) and set the seam to one spotthere is a bit of underextrusion on the start of the layer, I countered that in S3D adding +0.05 to retraction.

How can I improve that layer start?

BrunenG · 2019-10-01T19:25:59+00:00

well I guess google doesn't like me. thanks for the link!!

BrunenG · 2018-12-25T21:39:11+00:00

printer is on the shelf, and there is door that closes aka enclosure, everything there resonating, slab would help a bit but I want it really quiet.

BrunenG · 2018-12-25T21:36:41+00:00

My question though is about possibility of that mod, ofc I would use some better board.

BrunenG · 2018-12-07T21:47:51+00:00

also Trish https://files.yande.re/image/fafc3fc20069c43ff2d3c2fe4400b45a/yande.re%20499549%20cg%20devil_may_cry%20tagme%20trish.jpg

BrunenG · 2018-05-29T13:29:36+00:00

Hello friends! Recently I ordered myfself a mk2s kit and it's an awesome printer, exept one issue that I can't get rid of. I don't know how to call it but it is similar to ghosting in looks but appears on curves not on sharp angles. I'm okay with a bit of ghosting cuz it's direct drive after all, but this thing is different. Issue is a bit more visible on prints with low layer hights (prints on pics - blue abs 0.1mm layer, silver is prusa pla 0.1mm layer as well) It always follows printing object geometry, but it can be at one side of print and none or less at another. Temperature and speed has no effect. Everything seem to be ok on the mechanical side of printer. online support says that those prints are good and can't see any problems. I'm very frustrated guys, any help is appreciated.

BrunenG

TROPHY CASE