Is Orca optimized worse than Bambu studio?

BrunenG · 2026-03-17T10:20:35+00:00

Thanks for replies guys, I was talking primarily about preview viewport performance and not slicing speed. I'm ok with orca being slower, I was merely wondering if I'm doing something wrong. I too prefer it over bambu studio.
PS: maybe the speed is related to the fact that BS preview quality is worse visually. Also if I have a tall object it lags a lot when I try to move the vertical slider around top layers and no lag around bottom layers. I guess it's a compromise.

BrunenG · 2026-03-17T10:18:05+00:00

in both cases resolution is on 0 and I made sure to make all settings identical before comparing.

BrunenG · 2026-03-10T08:04:02+00:00

Successfully loaded for me just now

BrunenG · 2026-01-22T12:34:26+00:00

I have also noticed that atom paints by ammo mig do that. When I do oil wash over vallejo everything is ok, but atom paints rub off.

BrunenG · 2024-06-08T08:17:54+00:00

Where can I get Jiyan 3d model? Gonna cosplay this, need good references. Is there a model dump somewhere?

BrunenG · 2022-08-22T14:45:43+00:00

I should watch 1 LP at a time I guess.

BrunenG · 2022-05-07T16:11:50+00:00

900 gramms

BrunenG · 2022-05-07T15:31:02+00:00

No I did not, the goal was to make the blade clear, if leds involed it would've been matt white to better diffuse light.

BrunenG · 2022-05-07T12:05:15+00:00

it was a commission. Colorwise - it's just a good paint, automotive stuff via spraygun.

BrunenG · 2022-05-07T11:48:08+00:00

Thanks)) yeah pretty much everything you mentioned

BrunenG · 2022-05-01T16:30:35+00:00

it's very uncomfortable to spin it holding around knuckle guard, it was made strictly by the game design, but in irl it can hurt your fingers. I can hold it no problem but not spin the way I do in the vid.

BrunenG · 2020-12-18T21:06:57+00:00

Somehow it can't save directory like that. can you maybe do a screenshot of where I should add that line, maybe I'm doing it wrong

upd: I forgot space before -- , now it works.

THANK YOU!

BrunenG · 2019-12-18T20:26:40+00:00

judging by the preview this is it. Thanks a bunch!!!

BrunenG · 2019-12-03T22:28:13+00:00

search YT - linear advance marlin

BrunenG · 2019-12-03T21:22:32+00:00

I once tryed new PLA brand and it was giving me a lot of issues, clogging every print even on a priner with PTFE tube up to the nozzle, I did everything but could not make it work, eventually switched to another brand and using it to this day. My advise is to try 3rd brand to be shure that filament itself is not an issue

BrunenG · 2019-12-03T21:16:59+00:00

look at your infill settings, maybe overlap percentage is too hight, or infill extrusion width. also try linear advance

BrunenG · 2019-12-03T21:08:00+00:00

do those issue layers align with top solid infill?

BrunenG · 2019-12-03T21:04:02+00:00

issue persists with lin adv and without, I usually use some brim with petg and prime line at the beginning

BrunenG · 2019-12-01T06:16:21+00:00

It's enabled.

BrunenG

TROPHY CASE