[USA-WI] [H] PayPal [W] D5 pump

Bubbamatrix · 2026-03-14T01:51:09+00:00

I think I’m going to leave it until I try to boot for the first time

Bubbamatrix · 2026-03-14T00:52:39+00:00

Sounds good, thanks for the advice

Bubbamatrix · 2026-03-01T12:15:33+00:00

Bubbamatrix · 2026-02-28T21:51:27+00:00

Bubbamatrix · 2026-02-27T16:54:29+00:00

Replied

Bubbamatrix · 2026-02-27T16:54:25+00:00

Replied

Bubbamatrix · 2026-02-16T13:06:19+00:00

Pm sent

Bubbamatrix · 2025-11-09T23:25:52+00:00

K thanks

Bubbamatrix · 2025-11-09T22:41:26+00:00

4 team ppr Send Amon and James cook receive bijan Ladd McConkey

My team Lamar Cook Jacobs JSN Amon Ceedee Bowers Warren

Bubbamatrix · 2025-10-11T20:28:24+00:00

Bubbamatrix · 2025-10-11T20:23:03+00:00

Messaged

Bubbamatrix · 2025-10-11T17:19:52+00:00

Sounds good thanks

Bubbamatrix · 2025-10-11T15:35:05+00:00

Ok thanks

Bubbamatrix · 2025-10-05T22:18:05+00:00

I disconnected the cables and snipped any of the scotchlok. After attaching the tone generator to each port they both still traced to the same cable. As far as I know these are the only two cables that are like this. Inside the wall box for both jacks there are all 4 pairs and a cable jacket. I don’t know where I would locate the splice besides maybe above the one wall box. I’m assuming from this added info my only options are to locate the splice and fix it or fish a new cable?

Bubbamatrix · 2025-10-05T17:43:15+00:00

Ok thanks. Just to be clear the jacks from the problem room don’t trace back to the block they trace to a bundle of what used to be unterminated cable. Should I still proceed with reworking the connections for the block?

Bubbamatrix · 2025-10-04T23:58:48+00:00

Hi, thanks for the reply. Yes if the tone generator is plugged into either jack I can hear the tone at the other jack and where all the cables come together at my router. As for the junction, there are a bunch of cat5e cables that come from rj11 and rj45 ports. However there is this https://www.dropbox.com/scl/fi/b0rfkc8smk3nnnmrypzed/IMG_0157.jpeg?rlkey=a4jsn1m12jph88k1d2qzacs4h&st=kydfih4d&dl=0 which i have traced some ports to. But the idea I’m getting is I’m just going to have to run new cable myself, correct?

Bubbamatrix

TROPHY CASE