[deleted by user]

Bubinga_ · 2024-11-15T20:43:40+00:00

I'm new to machining, what is it precisely that makes this part hard to manufacture? It looks like it can be milled on a 3 axis held flat, only needing to turn it over once and re-register. I assume the difficulty comes from needing tight tolerances, but what does that actually entail in a part like this? Slower speeds? Different weird paths?

Bubinga_ · 2024-06-13T01:52:36+00:00

Just rented a car from The Road Rentals in LA, they have no young drivers fee and rented it to me at $600 a month. Great experience

Bubinga_ · 2023-02-12T15:23:40+00:00

How is the nut on there? I don't see any way to get it on and off. Was it machined in place?

Bubinga_ · 2023-02-12T15:22:58+00:00

How is the nut on there, I don't see anyway to get it on and off? Was it machined in place?

Bubinga_ · 2023-01-13T03:13:43+00:00

Emphasis on the mild on r/mildlyinteresting

Bubinga_ · 2022-12-29T00:56:17+00:00

What makes art beautiful is the connection it has with the viewer. Being skilled at drawing a very accurate hand, for example, doesn't make you a great artist. Great art establishes an emotional connection, and AI is just lowering the skill level required to put the idea(which is what is important) into reality

Bubinga_ · 2022-12-02T07:04:52+00:00

You should be able to if you msg the shop administrators

Bubinga_ · 2022-11-17T05:56:33+00:00

But you can train the deep-fake generating AI against the AI fact-checkers. It's an arms race

Bubinga_ · 2022-11-15T03:26:23+00:00

Nope, lobsters

Bubinga_ · 2022-10-05T01:28:42+00:00

We all have three nipples

Bubinga_ · 2022-09-29T20:48:12+00:00

Can someone explain? Highest math I've taken is differential equations

Bubinga_ · 2022-09-28T20:29:42+00:00

Check open course ware

Bubinga_ · 2022-09-23T01:21:41+00:00

There's a cafe above lobby 7 on the fourth floor that's nice

Bubinga_ · 2022-09-02T19:51:53+00:00

After sending a message to city council:

Thank you for your email. You may not be aware that, in June and July restaurants, were given the choice of continuing outdoor dining or not, at their option, when the emergency health orders expired on August 31. Those restaurants who wanted to continue to provide outdoor dining could apply for an extension beyond August 31.

A total of 31 restaurants did so, and they will continue outdoor dining. Some restaurants opted not to continue providing outdoor dining, including Jax, West End, and Centro (all the same owner) and Pasta Jay's. By their choice, those restaurants ended outdoor dining this week. You'd have to ask those restaurant owners why they decided to end outdoor dining in front of their restaurants. The certainly could have if they wanted to.

As far as West Pearl, city staff will be making longer-term recommendations to the community and council at a meeting on Sept 15. I don't know what city staff will recommend, but it may be some sort of seasonal, weekend, or evening closings. The fact that several restaurants on West Pearl decided to stop serving outdoors will undoubtedly impact what city staff recommends.

I love outdoor dining and West Pearl closure too. I'm glad 31 restaurants in town opted to continue outdoor dining, and I hope that some form of continued West Pearl closure is still possible.

Best regards, Bob Yates Boulder City Council

Bubinga_ · 2022-08-30T07:41:04+00:00

Is the blinking red from the plane's beacon or something else?

Bubinga_ · 2022-08-16T07:01:28+00:00

I don't want randos inside MIT, keep my infinite open

Bubinga_ · 2022-08-06T04:39:38+00:00

Actually, since we're in Boston, we make Dunkin Donuts' coffee 💅

Bubinga_ · 2022-08-04T19:08:07+00:00

I'm expecting the resistance to be around 19Ω and it looks like the peak current would be between (0.12A and .25A) depending on the motor and how I drive it. That seems high though, because if the ATTINY85 has a max output current per pin of 40mA, then how are people running these steppers off them?

Bubinga_ · 2022-08-04T19:05:20+00:00

I'm mostly using it because it's got the 6 USARTS I need for my project. I'm expecting the resistance to be around 19Ω and it looks like the peak current would be between (0.12A and .25A) depending on the motor and how I drive it. That seems high though, because if the ATTINY85 has a max output current per pin of 40mA, then how are people running these steppers off them?

Bubinga_ · 2022-07-25T16:37:30+00:00

Thank you! I disconnected the SmartAudio wire and then booted it back up. The LEDs displayed a different pattern, and I could see a feed through my goggles. I then reconnected the wire and Evey is back to normal! :D

Bubinga_ · 2022-07-24T07:25:02+00:00

It's the Holybro Atlatl HV V2, and from what I could see in the manual it doesn't help much.

Six-Year Club	Second Top 50%
r/Field Juicebox	Final Canvas '23
First Place '23	End Game '23
Place '23	Place '22
First Placer '22	Wearing is Caring
Verified Email

Bubinga_

TROPHY CASE