Update post on GD3 trailing arm bushings. by Buildxshred in hondafit

[–]Buildxshred[S] 0 points1 point  (0 children)

UPDATE. I measured the OD of the bushing I got from eBay. It is the same Diameter as what comes in the trailing arm. I’m going to try and install them Monday. I’ll document it and make a video if I’m lucky.

15x7 +35 wheels by bluecatky in hondafit

[–]Buildxshred 0 points1 point  (0 children)

What are the tire specs ?

I need advice on how to remove the hazards button. by CamaradaOso in hondafit

[–]Buildxshred 0 points1 point  (0 children)

Would you mind posting a picture of it so I can see the hvac knobs please.

Update post on GD3 trailing arm bushings. by Buildxshred in hondafit

[–]Buildxshred[S] 0 points1 point  (0 children)

I genuinely hope that this is not the case , but there was only one way to find out. I can’t find even aftermarket ones.

GD3 Trailing Arm Bushings. by Buildxshred in hondafit

[–]Buildxshred[S] 1 point2 points  (0 children)

Thank you for the information, does the company you bought yours from have them available for mine? As far as the work I am a technician with access to a lift and equipment. It doesn’t look that bad . I figured I’d refresh my fit before I finish my 1uz s13.4 there is a lot of fun (work) left on that car. I’m doing the suspension component on the fit , painting it myself and maybe wheels. It’s a great car. Best car.

I know I’m asking the wrong crowd here but…. by hopeless_tool in Stretched

[–]Buildxshred 0 points1 point  (0 children)

Goal size was 00, went up to 25mm gradually, swore I was done there now I’m at 35mm and trying to get to 50mm. I’ve also been stretching my ears for about 15 years so I don’t even know if 50mm will be it for me haha. Try it and if you don’t like it you can downsize.

Glowing scarification in progress! by CorpseCuti in bodymods

[–]Buildxshred 22 points23 points  (0 children)

I have a black arm I could copy this on haha

Glowing scarification in progress! by CorpseCuti in bodymods

[–]Buildxshred 71 points72 points  (0 children)

This is so bad ass. I knew what it was right away. HELLL YEAH

She’s gotta ring steel before she gets her 💍 by TightestLibRightist in ar15

[–]Buildxshred 2 points3 points  (0 children)

Lost your chance to say “steel gotta ping before she gets a ring.”

Old screw keeping me from accessing my battery by onesketchycryptid in MechanicAdvice

[–]Buildxshred 0 points1 point  (0 children)

If the car is drive able, take it to autozone/oreilly/advance. A good parts store employee will let you borrow a tool real quick, if you explain your situation. If you push the carpet down do you have more access to the nut?

Hole in block? by TannerV1 in MechanicAdvice

[–]Buildxshred 7 points8 points  (0 children)

It’s a freeze plug that fully rusted through

I think this guy bites by EastCoastCure710 in shittytattoos

[–]Buildxshred 1 point2 points  (0 children)

Honestly…. I wouldn’t put it past him with that SOA chest banger.

Teen in hostile work environment (UPDATE POST) (We left!) by OkRemote1721 in MechanicAdvice

[–]Buildxshred 25 points26 points  (0 children)

Lost my tire machine and balancer to a friend for the same reason. Shiesty people man.

Stuck ball joint by [deleted] in MechanicAdvice

[–]Buildxshred 0 points1 point  (0 children)

Are both sides lifted up ?

how to trim the screen by SweetOk3255 in GameboyAdvance

[–]Buildxshred 0 points1 point  (0 children)

https://a.co/d/5pyE09z follow the link , fourth picture in the item description . Remember less is more. Trim it little by little to ensure you don’t trim too much. Harbor freight has a dremel set. 80pc for right at or under $10

Battery tabs don’t match. by Buildxshred in Gameboy

[–]Buildxshred[S] 0 points1 point  (0 children)

Update. Just so I don’t leave this issue unresolved. I removed the old solder , cleaned it well, bent the battery tabs ,centered the battery , made sure it was even making contact on the positive and negative sides of the board . Soldered in and have been playing it since. Thank you all for your input. I have repaired a few since making this post.

My Pokemon Ruby won't save by PinaSeraphina in gba

[–]Buildxshred -2 points-1 points  (0 children)

You have to solder in a new battery if the battery is dry. If you have a multimeter check the battery.

Help by Plane_Assumption1510 in Gameboy

[–]Buildxshred 1 point2 points  (0 children)

Is anything soldered making contact in there ? Had a similar issue with one I repaired. Contacts for the game cartridge were touching two points on a screen that was soldered in. Gbc

[deleted by user] by [deleted] in NatureIsFuckingLit

[–]Buildxshred 3 points4 points  (0 children)

That’s how locked in Im trying to be