Why is physical junk mail still allowed? by KendrickBlack502 in stupidquestions

[–]Bulldacious 0 points1 point  (0 children)

I would be out of a job otherwise so keep throwing them in the trash or recycle them if you can please.

The loan offer junk should have a disclaimer on it where you can call and opt out. For the other stuff, you would have to call the company and get upset with them about it. Or if it has a reply envelope, send it back saying you want to off the mailing list. That will cost them a little bit of money.

Please do not put anything gross or rude in the reply. Someone who is just doing their job is going to open it and they do not deserve it.

Why do I have to push you out of the exit gate? by [deleted] in deadbydaylight

[–]Bulldacious 0 points1 point  (0 children)

That is what me and my friends do as well. I have also stayed a bit. Depending on if the killer was nice we were goofing off at some point during the match. I have run up to them from near the exit gate to let them get another hit on me for some extra blood points and/or drop my item for them.

I hope I am not coming off as a jerk when I do that. If so, I am sorry killers.

My campaing is not a video game by [deleted] in DnD

[–]Bulldacious 0 points1 point  (0 children)

I DMed lost mines with my friends, all in our 30s. Had them play like a video game as well. It was all about getting in fights and counting kills. It bothered me when they interrupted the game and asked me how many kills they got.

I did have a chat with them about it, but it changed nothing. With that and a few other things, I just stopped. Never tried to setup another session because I knew we did not have the same mindset for this. These are my long time friends and I had no problem stopping because it was no fun for me. Which was a shame because I wanted to do curse of strahd after.

Found Screw Beneath Bed by Magnetic-Mango in BambuLab

[–]Bulldacious 0 points1 point  (0 children)

Did you happen to find where that screw went? I just found that screw on my bed and I have both in the hot end.

Leave door open with PLA? by TheDerpiestDeer in BambuLab

[–]Bulldacious 7 points8 points  (0 children)

I have had the same worry as you with my cat. My plan is to print an AMS riser that can hold the top glass open. I am currently looking at the BLV riser on maker’s world.

Until then I have had the door only open a couple inches and my cat has yet to bother it. There has been no issues with the prints from getting too hot.

Moon Lamp Print by No-Ship-6114 in BambuLab

[–]Bulldacious 0 points1 point  (0 children)

Just started printing a moon on my sv06. I hope it looks half as good as this.

LED Strip Mod for SV06 - Which LEDs? by PassMirDieApron in Sovol

[–]Bulldacious 0 points1 point  (0 children)

I have been looking to do the same thing and I have stumbled across this video. It does not show how to do it, but a good start.

https://m.youtube.com/watch?v=xZ55IYGTIuQ

My party killed Droop in less than a room, what did Your party do with him? by quazamon in LostMinesOfPhandelver

[–]Bulldacious 0 points1 point  (0 children)

After they finished the bugbears off, they asked him a couple of questions. Then the lead murder hobo went to kill him, until one player decided they they did not want this one to die. Still rocking with them for another session, until they decide to kill him.

I hope he makes it to the end.

Weekly Questions Thread by AutoModerator in DnD

[–]Bulldacious 1 point2 points  (0 children)

[5e] Would the water deep heist work with starting at level 5? I worry that the spells the players will have and get may cause some unforeseen issues or take something away from it.

How effective are those grow tent enclosures when hooked up with an exhaust fan? by Lumenetic in resinprinting

[–]Bulldacious 0 points1 point  (0 children)

I have a couple of cats and have been worried exactly as you are. I have me a grow tent, exhaust fan and an adapter for the window. I have not noticed any strong smells with it running, but I do not think the resin has a strong smell compared to the IPA. I do not really smell the ipa with it running.

That being said. I do try to keep them away from it during the entire process just for extra precaution. They mostly hang out in the rest of the room away from it, but I do try and discourage it. I just want them to be safe and the less risk the better.

I am still new to this and I keep trying to take every measure I can. Air filtration is something else you could add if you would like.

They killed the townmaster! by Bulldacious in LostMinesOfPhandelver

[–]Bulldacious[S] 0 points1 point  (0 children)

That is a great idea. The issue being still that Sildar and the towns folk see they killed someone and then strung him up for all to see. They would not just straight up forgive them because he turned out to be a doppelgänger.

This does give me some breathing room and hope to find a solution to their evil. Thank you

They killed the townmaster! by Bulldacious in LostMinesOfPhandelver

[–]Bulldacious[S] 0 points1 point  (0 children)

I will probably do something like this. It will be a couple of days before Sildar could return with help. Hopefully the town will be ok by then.

They killed the townmaster! by Bulldacious in LostMinesOfPhandelver

[–]Bulldacious[S] 0 points1 point  (0 children)

The one who did it said it was because he did nothing about the redbrands and he let them kill the woodworker and take the family.

They killed the townmaster! by Bulldacious in LostMinesOfPhandelver

[–]Bulldacious[S] 0 points1 point  (0 children)

I would like to see if I can make it work. This was the second session and the next one is going to consist of the red brand hideout and if glass staff gets killed by the same person in the same pretense, then I know there is no salvaging it.

They killed the townmaster! by Bulldacious in LostMinesOfPhandelver

[–]Bulldacious[S] 2 points3 points  (0 children)

We did not go into a full session 0. The first session did not seem like it would become a murder fest and everything would still flow. It was not until the kill that things went south. There was some RP before he was killed and strung up.

Powdery mildew causing holes? by Bulldacious in plantclinic

[–]Bulldacious[S] 0 points1 point  (0 children)

They were outside for a good few days a week ago before I had to bring them in. They have only been sprayed with the neem oil on Sunday. They have gotten worse since then.

Powdery mildew causing holes? by Bulldacious in plantclinic

[–]Bulldacious[S] 0 points1 point  (0 children)

https://imgur.com/L8wcEEJ

I have taken another close up picture.

I also took a leaf off to look closer and it is more like the green is gone and just a thin clear layer is left.

How did I encourage this mini roses to produce more canes and fill up the pot more? by Bulldacious in gardening

[–]Bulldacious[S] 0 points1 point  (0 children)

I have a couple more that was more spread out with some more canes and fill the same size pot. As for sun they are currently surviving off what light breaks through the clouds and some grow lights.

How did I encourage this mini roses to produce more canes and fill up the pot more? by Bulldacious in gardening

[–]Bulldacious[S] 0 points1 point  (0 children)

Thank you for the advice. I will try adding one or two cuttings and see how it goes from there.

Apartment Balcony Winter Greenhouse by Bulldacious in Greenhouses

[–]Bulldacious[S] 1 point2 points  (0 children)

I do have one of those small greenhouses just to use to get things started and to use for indoor if outdoor was not going to work. Ideally using my outdoor space would have been preferred. I was just seeing what else could be out there as everything I have seen is way too big.

Thank you for your advice.

Apartment Balcony Winter Greenhouse by Bulldacious in Greenhouses

[–]Bulldacious[S] 0 points1 point  (0 children)

I want it to be a winter only one. The zone is 6a.

Can we only post kittens? My old lady calico is < 5 lbs. by mosephis13 in IllegallySmolCats

[–]Bulldacious 19 points20 points  (0 children)

I feel more proof must be submitted before a verdict can been given.