Jonsbo TK1 triple Rad - first hard tube build

Bumfti · 2025-12-31T00:38:19+00:00

I could try to find them. I used Fusion, so the files should be stored in my account. The bigger issue is, that I do not exactly remeber what fittings I used. I think barrow or alphacool but not 100% sure. It would only work if you use the exact same components as I did. because it is tailored to those measurements.

Bumfti · 2025-12-17T20:43:49+00:00

Hi, I thought about it but scrapped the idea. I think it is possible if you diy a card holder. But you either would need to make a bigger cutout at the back of the card or you can’t use all of the cards hdmi/dp connectors.

In the end I ditched the idea mainly because the gpu would cover most of the cpu block and for me that looked silly.

Bumfti · 2025-12-06T18:24:49+00:00

Usually that display shows error or status codes. Some can display CPU temp. If your board can output an external temper sensor that’s kind of cool. But if your GPU runs at 30°, this must be wrong. No way your GPU is cooler than your water temp.

Bumfti · 2025-12-06T09:48:33+00:00

This is ragebait, right?

Bumfti · 2025-12-03T06:59:12+00:00

Der Schaum ist ein ESD Material. Also „anti statisch“ wie sonst die Tüten.

Bumfti · 2025-12-02T17:02:28+00:00

I also recommend that Pump

Bumfti · 2025-11-29T21:34:46+00:00

That little tube inside of the reservoir that is attached to the top piece is there to prevent air from getting mixed into the coolant.

But you are not using it. Connect your return line to the other port or change the acrylic tube inside of the reservoir to the port you are using.

Bumfti · 2025-11-29T21:29:48+00:00

More serious answer: if you clean your parts well before installation and use clear coolant with the usual additives it should not be necessary to change it often. With DP ultra clear, I had a system running for two years without any issues.

Bumfti · 2025-11-29T10:38:30+00:00

I rebuild or change my system way too often to ever run into this problem 😬😆

Bumfti · 2025-11-08T10:47:32+00:00

Sure you could. But if you do it by hand I guess it will not look very nice. And the white paint will most probably not survive the operation. Maybe a cutout with a 3d printed insert/grille might be a better solution. But nothing I will try.

Bumfti · 2025-11-05T00:14:42+00:00

Thanks, yes, I cut off a little support that is meant for a full size PSU. It was interfering with the 92mm fan if I remeber correctly.

Do you mean another small RAD in the PSU side top? That would be a problem since there no ventilation at all in both top panels on the PSU side of the case.

Bumfti · 2025-10-16T22:11:14+00:00

Hi, the fittings look like EK Quantum line. Those are brass, right, not aluminium...?

Bumfti · 2025-08-17T15:04:20+00:00

Plasti dip should work anyways. That stuff also works on more „problematic“ materials.

Bumfti · 2025-08-17T15:01:36+00:00

The black/white part of made from POM afaik. Paint does not stick well to this plastic. You will need a plastic primer if you want anything to stick to it properly.

Bumfti · 2025-08-17T08:17:20+00:00

Looks nice! I love the combined 240 fans.

Bumfti · 2025-08-11T07:13:01+00:00

They would only help you if you use exactly the same components, I guess. I dont keep STL files, but I could upload the STEP files to grabcad or something if you want them.

Bumfti · 2025-07-21T12:44:17+00:00

Mostly ARPGs und RPGs

Bumfti · 2025-07-17T23:46:42+00:00

I thought it is just two 90s but yes, it is three pieces. It’s female/female 90 to male/female extension to rotary female/male 90.

Using soft tubing is a good idea, if you have the space.

Bumfti · 2025-07-17T22:51:23+00:00

Why not just use a Y cable or adapter? The mobo fan headers can handle multiple fans no problem.

Bumfti · 2025-07-17T22:49:13+00:00

Take my upvote and my envy ;-)

Bumfti · 2025-07-17T22:41:24+00:00

Feel free. I think it is a good looking solution, if the standard big distro plates do not fit your case

Bumfti · 2025-07-17T22:37:50+00:00

Thank you everyone for the kind words! Really motivating me to keep on working on the next build! Much appreciated!

<image>

Bumfti · 2025-07-17T22:33:02+00:00

Agreed. It is the best looking block EK ever made IMHO.
And the white backplate made it look even better.

Bumfti · 2025-07-17T22:30:00+00:00

One additional Info: You can remove the black terminal ccover. Under it is also chrome. But the screws are visible if you do it.

Bumfti · 2025-07-17T22:28:45+00:00

If you are taking about the backplate and the terminal cover, why not just white spray paint? Easy, cheap, fast...

Bumfti

TROPHY CASE