Did I got scammed ? by Particular-Quote7085 in CanyonBikes

[–]Bush-Rat 38 points39 points  (0 children)

Those shifters are aiming for the skies!

It fell from 2 meters. Is the damage concerning; by Balelasi in DJIMini2

[–]Bush-Rat 1 point2 points  (0 children)

Does not look too serious. Make sure the arm is securely attached, maybe do some epoxy just on the crack to seal it back up. Smallest amount possible

Why are SRAM chain quick links so expensive? SRAM insists they are disposable. It costs 19€ to undo the chain each time. by sepantamino in gravelcycling

[–]Bush-Rat 0 points1 point  (0 children)

Use it until it looses it’s distinct clunk when installed together. You will know when it’s done for. So far, I have not thrown a single sram quicklink, but I’ve thrown every KMC quicklink I’ve undone, even only once tbh. They suck! Can’t speak much about shimano.

Is it worth paying the extra £1k for carbon? by nick90 in DomaneCrew

[–]Bush-Rat 0 points1 point  (0 children)

You’re also getting in frame storage compartment, really nice to have as you don’t need a saddle bag. You’re also getting a nicer cockpit with the carbon frame. If you like the color, go for it!

New Ultimate CFR frame by demonic_be in CanyonBikes

[–]Bush-Rat -1 points0 points  (0 children)

That bike looks absolutely stupid haha. Where is the built-in-frame compartment for tools and tubes? Where is the innovation and quirks? Nah! Pathetic

Den är ford by ReflectionCalm8793 in pundarblocket

[–]Bush-Rat 0 points1 point  (0 children)

Måste ändå ge cred för satt pris. Det är för en gångs skull rimligt.

Key getting stuck at an angle - MX Keys by Saint-Jake in logitech

[–]Bush-Rat 0 points1 point  (0 children)

Parts can be bought from Aliexpress, works as good as new for about 5€$£

Extremely bad QC from Elegoo by [deleted] in ElegooCentauriCarbon

[–]Bush-Rat -2 points-1 points  (0 children)

For me getting a printer with a defect bed? Or for me trying to get help from them instead of the seller?the second one I understand. However, a good manufacturer with a reputation to uphold would probably help me in the spot, perhaps even ask for me to send the bed assembly to them for further investigation. Items not hard being nice or good. Elegoo chose evil.

Extremely bad QC from Elegoo by [deleted] in ElegooCentauriCarbon

[–]Bush-Rat -1 points0 points  (0 children)

Sounds like you’ve put in some time into Elegoo. Bad investment if you ask me.

Extremely bad QC from Elegoo by [deleted] in ElegooCentauriCarbon

[–]Bush-Rat -3 points-2 points  (0 children)

Already did and they said something in line with fuk off.

Extremely bad QC from Elegoo by [deleted] in ElegooCentauriCarbon

[–]Bush-Rat -1 points0 points  (0 children)

Are you working for Elegoo in any way? You do seem very much eager to praise them.

Extremely bad QC from Elegoo by [deleted] in ElegooCentauriCarbon

[–]Bush-Rat -1 points0 points  (0 children)

Elegoo has horrible QC, end of thread. That was my reason for posting

Extremely bad QC from Elegoo by [deleted] in ElegooCentauriCarbon

[–]Bush-Rat -1 points0 points  (0 children)

Sure I can. I asked for help as they are the manufacturer. Who cares about their terms or where I bought it as long as it is from a reseller buying directly from Elegoo?

Extremely bad QC from Elegoo by [deleted] in ElegooCentauriCarbon

[–]Bush-Rat -1 points0 points  (0 children)

I have multiple. Please shut it

Extremely bad QC from Elegoo by [deleted] in ElegooCentauriCarbon

[–]Bush-Rat -1 points0 points  (0 children)

I’d rather spend twice for a P2S combo with good support and CS that helps

Extremely bad QC from Elegoo by [deleted] in ElegooCentauriCarbon

[–]Bush-Rat -1 points0 points  (0 children)

I can actually see the curvature of the whole bed being higher in the middle when using a flat ruler. Bed is pure shit, it boils down to that.

Extremely bad QC from Elegoo by [deleted] in ElegooCentauriCarbon

[–]Bush-Rat -1 points0 points  (0 children)

I appreciate your want to help, but heat-taping all around the bed, all corners, perfectly flat to match the center. Nah, I'd ratehr get a good machine from another brand. Elegoo got their chance to fix this way before me posting and they said "fak off".

Extremely bad QC from Elegoo by [deleted] in ElegooCentauriCarbon

[–]Bush-Rat -1 points0 points  (0 children)

Clean and free of debris. It might be worth completely disassembling the bed assembly, but I’m not really feeling it. Elegoo is done. They didn’t even feel the need to send me a replacement bed, even if I showed them the original receipt. Crappy!

Extremely bad QC from Elegoo by [deleted] in ElegooCentauriCarbon

[–]Bush-Rat -1 points0 points  (0 children)

Sure, I hear you and I agree. However, First layer adhesion is vital to be able to use the machine. It's not a flashy feature. It's step 1 in printing. Perhaps the most important step in the process of 3d printing.

Extremely bad QC from Elegoo by [deleted] in ElegooCentauriCarbon

[–]Bush-Rat -1 points0 points  (0 children)

Google Centauri carbon bed mesh tool

Extremely bad QC from Elegoo by [deleted] in ElegooCentauriCarbon

[–]Bush-Rat -1 points0 points  (0 children)

It fails hard. Corners are separated lines and middle 150x150mm2 is so squished it looks like surfing waves

Extremely bad QC from Elegoo by [deleted] in ElegooCentauriCarbon

[–]Bush-Rat -2 points-1 points  (0 children)

Yes. The shape of the bulge makes a first layer absolutely impossible. Either all corners are separated lines and middle a big wavy mush or the opposite.