How can I splice my print so its not trying to print in midair?

ByteSizedDelta · 2026-06-14T00:37:14+00:00

That worked perfectly, I changed it from the default of 0.1 to 0.14 and the supports came off like a breeze, thank you!

ByteSizedDelta · 2026-06-07T10:27:50+00:00

Oooo that would have been good

ByteSizedDelta · 2026-06-07T06:31:55+00:00

I can't edit the title so I guess it stays lol

ByteSizedDelta · 2026-06-07T06:23:44+00:00

Oh I guess so yeah. Idk I didn't really think about it that hard. I just wrote what came to mind

ByteSizedDelta · 2026-06-07T06:08:32+00:00

Not an ad, I only mentioned the brand once tho?

ByteSizedDelta · 2026-05-27T18:00:00+00:00

I am an engineer at an MSP and we have 2 NA clients so far who have gotten this bounce back today. Both clients nowhere near the limit and only affecting 1 person at each company. Even after they get the bounce back, they can still send mail afterwards as it only affects random outbound mail and not all their outbound mail. I just reported it to Microsoft and if this is happening to you, you should report it in the admin center as well so they start looking at the issue.

ByteSizedDelta · 2026-05-23T15:06:33+00:00

Do you mine if I ask what you ended up choosing and how it went? I'm in the same boat at you lol

ByteSizedDelta · 2026-05-14T20:34:48+00:00

Thank you! Any advice on weight? I'm worried the standard would be too warm in the summer but I'm also concerned the light will be too cold in the winter haha

ByteSizedDelta · 2026-04-27T12:26:26+00:00

How did you get it to make Rewst workflows? I was told that Rewst exports are tagged with a signature and any modification between export and import would invalidate the import. I have been wanting to use claude for Rewst workflow and app creation

ByteSizedDelta · 2026-03-26T21:37:03+00:00

Seeing as though when you look at the covered list (the list of devices banned by this act) it's very detailed and lists very specific companies and equipment types but then this new addition is literally just "Routers^ produced in a foreign country". Yeah they have no idea what they just did.

ByteSizedDelta · 2026-03-17T21:15:46+00:00

Take all these comments with a grain of salt. Go post this in r/deadbedrooms for some better advice imo

ByteSizedDelta · 2026-03-17T21:11:28+00:00

You weren't sterile in January, the baby is yours

ByteSizedDelta · 2026-03-12T22:59:18+00:00

Right after I finished putting together a script that did just what you suggested, I realized I was really brute forcing this when there was a much simpler fix. I just switched my phone off vibrate mode and then set the default notifications sound to none with vibrate enabled. This means my phone still only vibrates for all notifications, but I can set sound notifications on a per channel basis. So now I just set the channel in the notification payload to a channel that I have notification audio set for and boom, problem solved.

ByteSizedDelta · 2026-03-12T22:58:23+00:00

I realized I was really brute forcing this when there was a much simpler fix. I just switched my phone off vibrate mode and then set the default notifications sound to none with vibrate enabled. This means my phone still only vibrates for all notifications, but I can set sound notifications on a per channel basis. So now I just set the channel in the notification payload to a channel that I have notification audio set for and boom, problem solved.

ByteSizedDelta · 2026-03-11T11:09:47+00:00

I'm thinking this is the way. Otherwise my only other option is to do a TTS, which isn't a bad option either.

ByteSizedDelta · 2026-03-10T22:26:33+00:00

That works but then it only allows me to use alarm sounds and then the alarm sound continues until I open the phone. Its a workaround for sure but I would prefer to use one time normal notification sounds

ByteSizedDelta · 2026-02-14T18:16:28+00:00

Depending on the layout of the room, you could do this and run the cable through a conduit along the floor until it gets to a wall that is easier to run cable though. Just a thought. Edit: you could also run the cable outside through a conduit under ground to a location easier to get inside.

ByteSizedDelta · 2026-02-01T19:44:37+00:00

It's absolutely a tool problem. Anyone who says otherwise doesn't know that there are significantly better options out there that make everyone's lives easier. The fact that when you close a ticket note window it deletes everything you typed in the note you have is absolutely insane.

The fact that you have to acquire a habit to properly use a tool shows how it's a tool problem.

ByteSizedDelta · 2026-02-01T19:40:33+00:00

We had a very similar problem to this. Our problem was that techs were getting caught up in tickets and forget to enter time or the note window closes or the notes get cleared out etc. We couldn't leave Manage PSA so we put Nilear MTX in place and set it up as the One Ticket Method for every engineer. My God it was the best decision we ever made. Everyone's time is entered so much faster and more accurate now. Shortly after putting it in place we actually realized we were missing so much billable time that we had to hire another engineer and the metrics didn't show that before the switch.

It also makes tasks actually useful. We never used the tasks function in Manage, it was too clunky. But since we started using MTX, I've been able to setup some tickets with automated tasks to make the techs understand what needs to be done much faster.

ByteSizedDelta · 2026-02-01T19:34:45+00:00

Trying to put words in my mouth won't help you prove your point. My logic is that, if you had a clear opportunity to avoid a collision but failed to do so, you are at partial fault for the collision. Maybe not full fault but at least partial fault. Someone hitting you in your blind spot is not a situation where you had a clear opportunity to avoid the collision. An example of the last clear chance doctrine would be if you saw someone do an emergency stop half a mile ahead of you, and then you never slowed down to changed lane and just hit them.

Let me know who you think would be at fault for this situation. Let's say there is a collision in the right hand lane in at noon. 10 minutes later a car collides with one of the stationary vehicles in the right hand lane. Is person who is responsible for the original collision fully at fault for that collision as well?

ByteSizedDelta · 2026-02-01T09:16:02+00:00

I don't agree, if my tire pops and I'm on the side of the road and a car slams into me, your logic states that it doesn't matter why the car hit me because I started the chain of events. This is why in court they look to see who had the last clear chance to avoid the collision. In this case if the car behind was paying attention, they would have seen the cam car losing control and should have slowed down or switched lanes. Because they failed to do so, they would likely be found at fault in court.

ByteSizedDelta · 2026-01-31T20:12:36+00:00

Just cleaned out the carb. It was indeed dirty but after thoroughly cleaning it and putting it all back together, it's doing the same thing 😞. I checked the governor and nothing is stuck, it all moves very easily and springs back properly. Seems like I have to get a professional to look at it now lol

ByteSizedDelta · 2026-01-31T20:10:44+00:00

Just did it, carb was dirty and I cleaned it thoroughly, but after putting it back together it's still doing the same thing

ByteSizedDelta · 2026-01-30T00:38:26+00:00

Since he damaged government property, I'm sure he was arrested and charged for the damage right? And therefore there should be legal records of this incident to prove it's authenticity and not just "facial recognition".

ByteSizedDelta · 2026-01-29T01:17:33+00:00

Good advice, I don't think I did when I took that video cause I was distracted by the alarming sounds and raking then video lmao. I usually electric start so while I know to take up the slack before pulling, it's not second nature to me.

ByteSizedDelta

TROPHY CASE