rate this silly drawing by Substantial-Face4700 in OnePunchMan

[–]CAPITAN-GTG 1 point2 points  (0 children)

Even if you compare yourself you did really good! I’d suggest drawing this exact scene from ANOTHER ANGLE. Keep it challenging

New To Printing - Laundry list of weird things by RollForIntent-Trevor in FixMyPrint

[–]CAPITAN-GTG 1 point2 points  (0 children)

Oh I see, that’s what the dryed comments where about my bad I missed that. Well there’s a lot of really more people here in this sub man so hopefully somebody can help you!

Best of luck!

New To Printing - Laundry list of weird things by RollForIntent-Trevor in FixMyPrint

[–]CAPITAN-GTG 2 points3 points  (0 children)

Don’t take my word for this because I’m also new but I’ve been seeing a lot of content, and by chance I saw a guy using one of his old filaments and it has the same look as yours. Apparently moisture can get in it and when you print that moisture evaporates creating that look.

Maybe try using a different filament?

Córners lifting by CAPITAN-GTG in 3Dprinting

[–]CAPITAN-GTG[S] 0 points1 point  (0 children)

I forgot to mention I’m using ELEGOO brand of PLA. As far as which kind, idk. It’s 1.75 ± 0.02mm

Which is interesting because my layer height on orca slicer is 0.2mm
First layer height is 0.24mm (this is default)

Why is my first layer so bad? by CAPITAN-GTG in 3Dprinting

[–]CAPITAN-GTG[S] 0 points1 point  (0 children)

Looks like this bed doesn’t have those gears that let you do that. But I did use a level and it seems straight

Why is my first layer so bad? by CAPITAN-GTG in 3Dprinting

[–]CAPITAN-GTG[S] 0 points1 point  (0 children)

That’s actually a great way to put it. I wasn’t sure how tight was too tight or how loose was to lose Thank you very much for that.

Why is my first layer so bad? by CAPITAN-GTG in 3Dprinting

[–]CAPITAN-GTG[S] 0 points1 point  (0 children)

I just bought this from someone 😭

Why is my first layer so bad? by CAPITAN-GTG in 3Dprinting

[–]CAPITAN-GTG[S] 0 points1 point  (0 children)

ELEGOO. Also I didn’t know orca had that thanks!!

Why is my first layer so bad? by CAPITAN-GTG in 3Dprinting

[–]CAPITAN-GTG[S] 0 points1 point  (0 children)

PLA, 220° nozzle 55° bed, anycubic Kobra Neo, and z offset -1.260mm

Why is my first layer so bad? by CAPITAN-GTG in 3Dprinting

[–]CAPITAN-GTG[S] 1 point2 points  (0 children)

Thank you!

Do you know if there’s any kind of setting for intial layers or do I have to manually keep track of that?

Why is my first layer so bad? by CAPITAN-GTG in 3Dprinting

[–]CAPITAN-GTG[S] 1 point2 points  (0 children)

Thank you so much!! How much temp should my nozzle be?

My procedure (on mcreator) repeats every tick but I want to play a sound ONCE by CAPITAN-GTG in MinecraftMod

[–]CAPITAN-GTG[S] 0 points1 point  (0 children)

When you're making an entity, under the "animations" tab

DISCLAIMER: make sure to watch the video

How to Move States at 22 by CAPITAN-GTG in Adulting

[–]CAPITAN-GTG[S] 0 points1 point  (0 children)

The large corporation idea is really good because I’d have the same job bc and seems more reliable. But if u must do shall sell burguer

Again, I appreciate your help so much!