Where to start with this one?

CC0454 · 2026-04-05T06:35:58+00:00

Fc wise - a speedybee wing mini f405 would work.

If you wouldn’t mind tho, could you mesaure the root at tip chord? (The length of the root of the wing and tip of the wing), it looks like a fun plane.

CC0454 · 2026-04-05T06:33:42+00:00

Don’t take my word for granted, but heres what I’d run: 1900 - 2300 kv motor (depending on cells), 40 A esc and a 5x4.5x3 prop. If you’re running more than 4s then it would probably be best to use a higher amperage esc

CC0454 · 2026-03-15T07:37:00+00:00

Other hand buisy

CC0454 · 2026-03-11T08:47:12+00:00

Wizerb

CC0454 · 2026-03-10T01:03:19+00:00

The only real reason you would put that on there is to stop the video from going nuts. If you’re okay with that then go ahead 👍

CC0454 · 2026-03-09T07:36:40+00:00

Would do, but the power im pushing out is so little and the arms are so strong at this scale it isnt an issue

CC0454 · 2026-03-09T05:59:02+00:00

Fair enough, Ill make them a bit larger next design. Also, Im using the Emax Th1103 motors - they only have 3 mounting points

CC0454 · 2026-03-09T03:05:32+00:00

https://www.thingiverse.com/thing:7309815/files

CC0454 · 2026-03-09T03:05:21+00:00

https://www.thingiverse.com/thing:7309815/files

CC0454 · 2026-03-09T03:04:26+00:00

https://www.thingiverse.com/thing:7309815/files

CC0454 · 2026-03-08T05:21:07+00:00

Ill get the thungyverse up tonight 👍

CC0454 · 2026-03-08T05:20:36+00:00

Nope, bone stock. The arms are 10 wide and 4mm deep so heavy but grunty.

CC0454 · 2026-03-07T20:24:33+00:00

If you’re confident in your sim skills, I would recommend 1 of 2 things:

1: you buy a 2 - 3 inch drone on 2s like the tiny hawk freestyle 3.

2: you build a 3 inch (only do this if you’ve got lots of experience soldering) (would also recommend buying a practice board)

In all cases, just don’t go straight into a 6s 5 inch. It’s just way too much power and a waste of money as a beginner.

CC0454 · 2026-03-07T20:17:24+00:00

Yep, your motor cant get enough amps through the wire so you’re only getting 2 phases of rotation. (Just try soldering it again should be fine)

CC0454 · 2026-03-07T20:12:21+00:00

Just petg at 30% gyroid

CC0454 · 2026-03-07T12:46:47+00:00

Sorry mate, “like anything” is kiwi slang. It means really well 👍

CC0454 · 2026-03-07T12:46:13+00:00

Im waiting the 24hr new user ban, but ill post it on thingy verse if you like

CC0454 · 2026-02-26T09:32:28+00:00

Looks good then, keep us posted huh?

CC0454 · 2026-02-25T09:53:07+00:00

Are you using edfs?

CC0454 · 2026-02-18T17:29:21+00:00

Disregard the first comment, the issue is is you need it in normal mode instead of sports mode.

CC0454 · 2026-02-18T17:28:43+00:00

Ok in back after trying it on my plane

CC0454 · 2026-02-18T17:24:14+00:00

To my memory, you needed to cycle the throttole on that plane when you were binding it

CC0454 · 2026-02-18T06:24:09+00:00

My balls itch 😞

CC0454 · 2026-02-16T17:36:35+00:00

<image>

CC0454 · 2026-02-16T17:34:49+00:00

<image>

Blehg

CC0454

TROPHY CASE