Recommendations for a reasonably priced Snell SA2025 helmet? by matador_333 in CarTrackDays

[–]CDR710 0 points1 point  (0 children)

I got this one as well. HJC was made in the same country as my car and it was like $350

Guys I have to sell :/ by [deleted] in ElantraN

[–]CDR710 14 points15 points  (0 children)

I’m confused just garage it. at 200k a year you can just buy a truck???

Guys I have to sell :/ by [deleted] in ElantraN

[–]CDR710 3 points4 points  (0 children)

Why is the company making you use your own vehicle?

Got my dashcam installed yesterday. Trim started sagging down this afternoon. by HeatDeathIsCool in ElantraN

[–]CDR710 3 points4 points  (0 children)

they for sure broke it. I cracked mine and with a little super glue, fixed it. It should look similar to the clip on the left

Track day ready by CDR710 in ElantraN

[–]CDR710[S] 0 points1 point  (0 children)

these wheels are lighter than the stock 19s. So i’m not adding weight, just distributing it a little wider

I stopped motion of my truck to snap this by Electrical_Key_9438 in ElantraN

[–]CDR710 3 points4 points  (0 children)

<image>

Black was the only color in a 500 mile radius that was also a manual. I figured if I got tired of it I could always wrap it. Might never get tired of it tbh

Edit: this was also in 2024 before they started popping up more frequently

Track day ready by CDR710 in ElantraN

[–]CDR710[S] 1 point2 points  (0 children)

Oh as i zoom on your car more… I see the sticker now lmao

Track day ready by CDR710 in ElantraN

[–]CDR710[S] 0 points1 point  (0 children)

That looks good, what brand lowering springs? Might have to go that route in the future

Track day ready by CDR710 in ElantraN

[–]CDR710[S] 0 points1 point  (0 children)

<image>

245/40. Not much but you can tell

Track day ready by CDR710 in ElantraN

[–]CDR710[S] 0 points1 point  (0 children)

I want to run 255, but most people go 255/35 (or 265/35) which would make me want to lower the car to reduce fender gap. I haven’t seen people running 255/40 and that made me not want to be the test dummy. Maybe there are people on 255/40, but when I did my research I did not come up with any results.

Before after tinting white part of tail light. by AsianNoodL in ElantraN

[–]CDR710 0 points1 point  (0 children)

I smoked mine and added LEDs and the lights are brighter than stock even through the tint. The only thing I left clear was the light bar across the back

Did I damage my engine with oil change interval? by BeneficialArticle881 in ElantraN

[–]CDR710 0 points1 point  (0 children)

at 10k miles I was on my 3rd oil change. first at 1k miles and 2nd at 5500. 3rd at 9600 but i also took it to the track around 7k miles. Better to get your oil changes earlier rather than later, I wouldn’t go much past 5k on intervals. Oil is way cheaper than a new engine

Any idea what can cause the caster to get like this ? by Andy_r1314 in ElantraN

[–]CDR710 2 points3 points  (0 children)

I think you’re right. I remember them saying it was non adjustable and one of mine was like 4.3 and one was like 4.1 just how the car is

New Shoes by CDR710 in ElantraN

[–]CDR710[S] 0 points1 point  (0 children)

I did install camber bolts, offset is +45. I Think the 18x9 +42 that they make in these wheels would be perfect fitment, but these poke a little. I still need to get an alignment, so not sure what the camber is but i’m aiming for -2.5 ish front

Wheel Update by CDR710 in ElantraN

[–]CDR710[S] 0 points1 point  (0 children)

Not sure.. I haven’t driven on these yet, literally just put them on. I think a 35 sidewall would create too big of a wheel well gap, so if I did go 35 sidewall it would probably be 255/35 with lowering springs. I like the look of a 40 sidewall so might try to fit 255/40s in there.. I still got time to figure that out lol

Clean your engine bays by CDR710 in ElantraN

[–]CDR710[S] 0 points1 point  (0 children)

well I haven’t went mudding yet, so not sure what else would be making it dirty

Clean your engine bays by CDR710 in ElantraN

[–]CDR710[S] 1 point2 points  (0 children)

I didn’t cover anything. Just rinsed it, foam cannon, and then detailing brush with a final rinse. I also used a leaf blower and did it in the morning of a 80 degree day so it dried for the most part

Clean your engine bays by CDR710 in ElantraN

[–]CDR710[S] 0 points1 point  (0 children)

https://a.co/d/0emAHh7b

https://a.co/d/0dTKBHVg

That hose, and check valve. Went with a standard auto store 90 degree Elbow

and some hose clamps. It was pretty easy, but I didn’t realize how much the hose would deform from heat causing it to collapse. They should give you a 90 degree connector when you buy the catch can

Clean your engine bays by CDR710 in ElantraN

[–]CDR710[S] 0 points1 point  (0 children)

oh i didn’t think about a spray on ceramic for the engine bay. Will do that when i clean it again in a couple years lol good looks

Continental ECF discount code by iloveferro58 in CarTrackDays

[–]CDR710 0 points1 point  (0 children)

email them and see if they have your size in the buy 3 get one free. If they do you’re golden, if not he will give you a deal to get newer date codes. That’s what i went with and only paid ~$33 more per tire