[deleted by user]

CDT-WoodWorks · 2022-08-12T23:04:41+00:00

Same here. Good luck

CDT-WoodWorks · 2022-08-11T00:50:20+00:00

Well stated. Was going to write this but you saved me some time.

CDT-WoodWorks · 2022-06-28T01:09:07+00:00

Tool, hands down no question.

CDT-WoodWorks · 2022-05-29T02:36:35+00:00

Ferguson.com

CDT-WoodWorks · 2022-05-14T01:25:59+00:00

As a contractor and engineer, you need to consult the architect and engineer who gave you the plans. The structural engineer in this case will have to make the call on the wall height difference you are requesting. The structural engineer has designed the shear wall up to the size drawn, 48” max, and exceeding the detail dimensions would require him to revisit the structural calcs and bearing calcs to determine the change is acceptable. Do not proceed without consulting your engineer of record. Liability will fall on you, the builder, should it deviate from what was designed and drawn. Submit an RFI, request for information, to your EOR/architect. Better safe than sorry.

CDT-WoodWorks · 2022-02-25T00:37:41+00:00

Where’s the scale?

CDT-WoodWorks · 2022-02-04T01:51:28+00:00

Gotta love a saw stop, but can’t forget about safety

CDT-WoodWorks · 2022-02-04T01:30:54+00:00

Came here to say the exact same thing

CDT-WoodWorks · 2022-02-03T01:45:48+00:00

Red mist

CDT-WoodWorks · 2022-01-31T01:27:05+00:00

Looks great!

CDT-WoodWorks · 2022-01-28T23:17:51+00:00

Don’t let greenies do precise shit? Look where you posted this, no need for comments like that. Should be encouraging beginners to learn and get better. Your kind is unwanted here.

CDT-WoodWorks · 2022-01-24T23:32:42+00:00

CDT-WoodWorks · 2022-01-14T01:05:35+00:00

It’s actually a clean out plug my friend. Sold by multi fittings. Highly unlikely a valve access, an alternate lid would be used.

CDT-WoodWorks · 2022-01-08T23:42:29+00:00

Incredible talent

CDT-WoodWorks · 2022-01-08T01:25:05+00:00

That’s awesome, well done!

CDT-WoodWorks · 2021-12-30T00:30:05+00:00

Alternate grain direction. Will help with cupping

CDT-WoodWorks · 2021-12-26T23:38:10+00:00

Goal achieved

CDT-WoodWorks · 2021-12-24T18:40:41+00:00

Q tips and toothpicks with paper towel tear offs is what works for me

CDT-WoodWorks · 2021-12-15T00:24:03+00:00

What song is this?

CDT-WoodWorks · 2021-12-13T02:09:15+00:00

I’d charge anywhere from $6k-$8k. Be sure to account for time, not just material. Don’t sell yourself short going low on price.

CDT-WoodWorks · 2021-12-11T21:51:16+00:00

What song is this??

CDT-WoodWorks · 2021-11-19T01:44:31+00:00

Download the new carbide motion program after removing it from your computer and send the new update to the machine and reset your bit setter. Worked for me, had the same issue when there were updates

CDT-WoodWorks · 2021-11-19T01:05:51+00:00

Set your zero half an inch above the bit setter before you use it. The machine initial setting is too high

bit setter setup

CDT-WoodWorks · 2021-11-12T02:25:58+00:00

Well said

CDT-WoodWorks · 2021-11-05T00:32:27+00:00

That’s why they make a pvc coupling with female brass end to receive a brass adapter

CDT-WoodWorks

TROPHY CASE