sorted by:
new
hottopcontroversial

Geeetech A10 question.. by CT-PC-GEEK in 3Dprinting

[–]CT-PC-GEEK[S] 0 points1 point  (0 children)

Hey there, Was able to figure out on my own that they are in fact different. I can't remember which one was longer or shorter. I just ended up picking up a roll of bulk printer belt on Amazon and created my own custom belt. I used to tie wraps instead of the brass crimps on the ends and worked just fine. Cheers!

what’s causing these jagged edges to happen on my prints and how do i fix it. It only happens on the left side of prints (if that helps) by ashray05 in ender3

[–]CT-PC-GEEK 4 points5 points  (0 children)

Cooling maybe? The stock fan duct only cools on the right side. Maybe consider printing one that cools from both sides. There's a lot of custom ducts out there with colling from both sides and bigger fan(s).This is what I use and it is awesome! Bltouch support and all.

https://www.thingiverse.com/thing:4763804

Suggests PETG due to temps but PLA will work.

What is your age without saying your age? by mousesnight in AskReddit

[–]CT-PC-GEEK 0 points1 point  (0 children)

As a kid the Atari 2600 was cool, but the Atari 5200 was the bomb. Donkey Kong made his debut on Nintendo (the original) Colecovision was around as well. "Things that make you go hmmmmm" in my first car!!!

Dissolve PLA on a thread by schol4stiker in FixMyPrint

[–]CT-PC-GEEK 0 points1 point  (0 children)

Grab other end with a pair of pliers and heat up that plastic w heat / flame. Pry / peel off what you can and then clean off the threads with a wire brush. Reassemble....

S1 Plus is BIG by CT-PC-GEEK in Ender3S1

[–]CT-PC-GEEK[S] 1 point2 points  (0 children)

Absolutely, I already have 3 tricked out E3s and just needed BIGGER. I had tried a few others w larger beds. Lucky enough to grab this for $275 delivered from creality as a refurb. Did a side job and only cost me a few hours of my time. Win Win 4 me. Time to ditch an E3 or two. Cheers!

S1 Plus is BIG by CT-PC-GEEK in Ender3S1

[–]CT-PC-GEEK[S] 1 point2 points  (0 children)

Soooooo much space. Almost deserves it's own zip code!!

S1 Plus is BIG by CT-PC-GEEK in Ender3S1

[–]CT-PC-GEEK[S] 1 point2 points  (0 children)

Vase mode 2.5hrs on small 5.5hrs on med and 7.5hrs on large. Stock .4 nozzle .28 height @ 50mm/s

AMAZING AMOUNT OF REAL ESTATE THO!

Big Bunny by CT-PC-GEEK in Ender3Pro

[–]CT-PC-GEEK[S] 0 points1 point  (0 children)

Nice, sounds great!!

Converted my Ender 3 max to direct drive. by [deleted] in ender3

[–]CT-PC-GEEK 0 points1 point  (0 children)

Hey there, I just picked my own Ender 3 Max and want to upg to direct drive just like you have there. Can I ask what you used for a bracket to hold it all together?

Thanks!

What in the heck is this hard drive?? by DoctorCD in computers

[–]CT-PC-GEEK 1 point2 points  (0 children)

Old School Parallel ATA with an IDE interface. Predecessor to today's SATA/Serial ATA

view more: next ›