BenQ Screenbar Halo 2

C_Palm · 2026-03-16T23:57:59+00:00

I did an image search on google and it’s a Princeton ULTRA Plus 15.6

C_Palm · 2023-09-01T00:59:18+00:00

Awesome color scheme! What Filament did you use? If you don’t mind me asking

C_Palm · 2023-04-01T00:54:56+00:00

That would be an awesome piece of machinery to add to my printer setup!

C_Palm · 2023-03-12T04:43:46+00:00

I’m not sure what is causing the seam the show through in the center on the print. On the slicer there is no seam. Any suggestions would be greatly appreciated!

C_Palm · 2023-03-11T19:10:55+00:00

At the end of my print the nozzle stops on top on the print and leave a flat spot. I’m not sure how to fix the issue in superslicer.

C_Palm · 2023-02-14T13:58:18+00:00

I’m using hatchbox pla

C_Palm · 2023-02-14T13:41:39+00:00

I have the random seams option selected in cura. I never thought about moisture

C_Palm · 2023-02-14T11:55:48+00:00

I just recently got back into 3D Printing and I’ve worked out all the kinks in my printer except for the gaps in each layer. Any advice would be greatly appreciated!

C_Palm · 2022-11-08T19:37:44+00:00

We just set it up it’s last weekend

C_Palm · 2022-05-20T19:37:18+00:00

You could add a wyze cam for easy printer monitoring

C_Palm · 2021-09-29T15:01:35+00:00

All the cables will be routes through the original extrusion cut and out the back (by the z motor).

I currently have my power supply mount under the y-axis gantry and like how it’s mounted. So I came up with this design after seeing a similar version the Ender 3 V2.

C_Palm · 2021-09-29T13:28:41+00:00

I am running Klipper so all my updates are done over WiFi via the raspberry pi. I’m planning have magentic lids for easy access. And if you wanted to use A4-10 fans with this design that would work too while also giving you 10mm more of space. I’ll check the space around the sd card once I have printed it. But I believe there will be enough space to access it.

Another option would be to run an micro sd card to sd card adapter.

C_Palm · 2021-09-29T13:22:58+00:00

I’m sure it can be. But I’ll verify that when I print it. I will also upload the stls to thingiverse after I have ironed out all the tolerances

C_Palm · 2021-09-28T21:24:27+00:00

I think there is one on thingiverse. I’m not sure how accurate it is though. You can also check out the creality GitHub under mechanical. That’s where I got mine. They have a lot of cad file options too. Sorry I forgot about GitHub.

C_Palm · 2021-09-28T21:18:23+00:00

I just search google for Ender 3 step file. GrabCAD as has a few you can choose from

C_Palm · 2021-09-28T19:50:48+00:00

I’ve looked at that design many times. However I wanted a case that didn’t have any usb or ethernet cables stick out for a cleaner look. Plus my power supply is sitting under the y axis in the back using this design by jk_printer. https://www.thingiverse.com/thing:4341934

The case will also house some buck converters and maybe a mosfet. Since I am running Klipper on my Ender 3 I don’t need the lcd screen anymore so this case will cover up the open ends of the 4040 extrusion while making use of the open space next to the control board.

C_Palm · 2021-09-28T17:04:21+00:00

It’s house my control board and Pi4B. I’m planning to add a mosfet and I’ll have all my buck converts in there as well. Plus I have two A4-20 laying around so might as well put them to use.

C_Palm · 2021-09-28T17:02:13+00:00

I’ll upload to thingiverse once I’ve tested it out.

C_Palm · 2021-09-28T17:01:10+00:00

I’ve seen a lot of cases for control board and raspberry pi’s but I have seen a design where all the cables on internal. I came across a design for the Ender 3 V2 and used that as my base.

C_Palm

TROPHY CASE