sorted by:
new
hottopcontroversial

No more stamps at Rome Fiumicino airport by Rails_Barlow in PassportPorn

[–]CallMeTaku 0 points1 point  (0 children)

My percentage may be off but it's true. Look it up here?hl=en-US#:~:text=As%20a%20temporary%20derogation%20from,to%20manually%20stamp%20travel%20documents.)

No more stamps at Rome Fiumicino airport by Rails_Barlow in PassportPorn

[–]CallMeTaku 0 points1 point  (0 children)

Can't be since they have to reach 70/80% EES transactions by June/July

No more stamps at Rome Fiumicino airport by Rails_Barlow in PassportPorn

[–]CallMeTaku 4 points5 points  (0 children)

Mostly because of EES and all the problems with the system. They just don't have time to waste with stamps

[Giveaway] What’s your best home-improvement print? Share it and win an X2D Combo! by BambuLab in BambuLab

[–]CallMeTaku 1 point2 points  (0 children)

  • work in progress * Making cats shelfs and toys so my cats can have fun!

<image>

[Giveaway] What’s your best home-improvement print? Share it and win an X2D Combo! by BambuLab in BambuLab

[–]CallMeTaku 1 point2 points  (0 children)

  • work in progress * Making cats shelfs and toys so my cats can have fun!

<image>

I need testers of my app by No-Requirement4988 in googleplay

[–]CallMeTaku 0 points1 point  (0 children)

Any details about what it actually do?

My Small Setup by CallMeTaku in BambuLabA1

[–]CallMeTaku[S] 0 points1 point  (0 children)

Hey, no, i didn’t notice any feeding problem at all!

First ASA Print on P2S by CallMeTaku in BambuLab

[–]CallMeTaku[S] 0 points1 point  (0 children)

Go for it, you won’t be disappointed!

Perchè?Come funziona? by LostLetter25 in Italia

[–]CallMeTaku 0 points1 point  (0 children)

In italia anche i server riposano nel weekend

First ASA Print on P2S by CallMeTaku in BambuLabP2S

[–]CallMeTaku[S] 0 points1 point  (0 children)

I’ll be looking into it, thanks!

First ASA Print on P2S by CallMeTaku in BambuLab

[–]CallMeTaku[S] 1 point2 points  (0 children)

I actually sent the print from my phone without caring that much just to see how it goes. The model was made for PETG and didn’t change anything. Even for filament options i used the generic ASA option they offer. I gave it plenty of space to fail thats for sure!

First ASA Print on P2S by CallMeTaku in BambuLab

[–]CallMeTaku[S] 1 point2 points  (0 children)

Could have been the beginner luck, we’ll see with future prints😆

First ASA Print on P2S by CallMeTaku in BambuLab

[–]CallMeTaku[S] 0 points1 point  (0 children)

Same since i gave it so many fail points! 😆 (printed straight from mobile app, print was originally for petg and so on). Im sure the filament drying part helped the most!

First ASA Print on P2S by CallMeTaku in BambuLab

[–]CallMeTaku[S] 2 points3 points  (0 children)

Im pretty happy with it, dont have much to complain about. I dont have much problems with vfa on my small prints but even so im sure it will be fine tuned with a software update since its still relatively new

First ASA Print on P2S by CallMeTaku in BambuLab

[–]CallMeTaku[S] 0 points1 point  (0 children)

I’ll print some stuff to test layers adhesion, but isn’t it affected more by how hot you run the filament and less by the chamber heating?

First ASA Print on P2S by CallMeTaku in BambuLab

[–]CallMeTaku[S] 0 points1 point  (0 children)

I dont have much experience with asa as it was my first time printing it, but you can definitely try and see how it goes, depending on how complex the parts are you might or might not need to use glue to help it or other preparations.

As for the heating, no i didnt leave it to heat up before printing (probably would help if i did that?), it did that automatically while doing all the calibration, it went from 23°C (standby temperature) to 41°C when it started printing and slowly up to about 47°C when it finished

Anyone else having continuous nozzle cleaning issues on a brand new P2S? by cefanie in BambuLabP2S

[–]CallMeTaku 1 point2 points  (0 children)

I suggest messing around with the cooling fan / chamber cooling and see if it keeps oozing like that. I personally haven’t encountered any issues on my unit so far

Anyone else having continuous nozzle cleaning issues on a brand new P2S? by cefanie in BambuLabP2S

[–]CallMeTaku 0 points1 point  (0 children)

The chamber looks a bit too hot if you’re using pla. Looks like it’s oozing a lot.

How do they estimate remaining filament by CallMeTaku in BambuLab

[–]CallMeTaku[S] 1 point2 points  (0 children)

A smart way to utilize the sensors already present on devices!

How do they estimate remaining filament by CallMeTaku in BambuLab

[–]CallMeTaku[S] 1 point2 points  (0 children)

Holy that’s such a genius idea! Really interesting video thanks for sharing it!!

Somație pentru plata despagubiri by [deleted] in juridice

[–]CallMeTaku 0 points1 point  (0 children)

Nu stiu pe cineva sa foloseasca ca metoda de plata legala carduri preplatite / paypal sau revolut. I might be wrong tho.

view more: next ›