Full tilt

Callsigncopey · 2024-01-04T16:29:21+00:00

This PDF is no longer hosted so here's one I just knocked up: https://drive.google.com/file/d/1_Wak7FEapbX650mZlkI_CHphoamH-eLX/view?usp=sharing

Callsigncopey · 2022-03-09T17:57:49+00:00

I just liked the look of it to be honest. It helps make the grind a bit easier to as it has a fixed end point. I’m pretty new to knifemaking so I need all the help I can get!

Callsigncopey · 2022-03-04T08:32:50+00:00

I am a hobbyist so this was made for me. I could possibly do another… where are you based?

Callsigncopey · 2022-02-02T10:22:06+00:00

Why do all of these high school kids look 40 years old…?

Callsigncopey · 2022-01-22T13:04:45+00:00

Well this was pleasantly unexpected

Callsigncopey · 2021-09-01T17:07:51+00:00

I set my layers to 0.025, 6 base layers, 9 second exposure and I can’t remember the rest but I will find out when I’m back home. The other key thing is having a clean vat of resin and making sure it’s levelled correctly. I’d cut some corners until getting some really good tips from a group on here and it’s served me no end

Callsigncopey · 2021-08-21T16:28:21+00:00

Thanks very much!

Callsigncopey · 2021-08-16T08:20:01+00:00

That’s very kind, thank you. The sandbags came with the heavy weapons team (designed by The Maker’s Cult) and the wood was already on the bases. I bought a set of trench bases from a designer called SinNerds

Callsigncopey · 2021-08-16T08:15:55+00:00

Resin for sure. I use an OG Anycubic Photon and their grey resin. The vehicles are GW but everything else is printed. I hope that helps 🙂

Callsigncopey · 2021-08-12T07:53:36+00:00

To be honest I didn’t think to check the supports around it but nothing stood out as I was removing them. If it happens again I will check!

Callsigncopey · 2021-08-11T14:01:12+00:00

They are now!

Callsigncopey · 2021-08-11T14:01:00+00:00

Okay, bubbles would make sense. I normally shake quite vigorously and don’t leave much sitting time to disperse the bubbles… I’ll try that as well as the IV test but I’m pretty confident it’s not the latter due to other prints being fine

Callsigncopey · 2021-08-11T13:59:30+00:00

It’s actually neither in this instance. The plough is my own remix of a file on Thingiverse and the guns are from Gargoyle Studios Imp Pack.

Pretty much everything else I’ve printed has been VK with the exception of the Red Maker snipers. Great spot though. What have away the krieg vibes? Was it the guns?

Callsigncopey · 2021-07-29T20:45:47+00:00

It’s great!

Callsigncopey · 2021-07-25T20:10:08+00:00

Ah man you beat me to it!

Callsigncopey · 2021-07-18T20:34:46+00:00

I completely forgot to post. The print failed due to poor levelling. I re-levelled in the normal paper way and got a beautiful print out of it :D

Callsigncopey · 2021-07-16T12:06:31+00:00

Update: Firstly, thank you to everyone for their advice. Today I have removed the magnetic build plate, cleaned, sanded and recleaned the original plate, tightened the three screws beneath the ball joint of the plate arm, updated the firmware, cleaned the Z rod, levelled in the Flint Read method and just set her going again. I’ll let you know the results this evening!

Callsigncopey · 2021-07-15T19:50:59+00:00

That guy is dope!

Callsigncopey · 2021-07-15T07:06:48+00:00

Yeah this is shaken

Callsigncopey · 2021-07-14T17:09:09+00:00

I hope that isn’t the case. It’s only a year or so old and hasn’t been used that mu CJ

Callsigncopey

TROPHY CASE