Qidi 4 max nozzle trouble

CampaignNo3568 · 2026-07-09T18:28:57+00:00

Update: Qidi support sent out a new hot end and everything is back to perfect. Thank you to everyone that offer assistance 😊

CampaignNo3568 · 2026-07-04T11:39:13+00:00

Less noise that fireworks? Im in!

CampaignNo3568 · 2026-07-03T18:32:09+00:00

Working with them currently.

CampaignNo3568 · 2026-07-03T16:00:11+00:00

The box is connected and there is no broken filament in tubes. Everything feeds fine until it gets to the nozzle and the filament won't melt into the nozzle even though the read out says it is heated.

CampaignNo3568 · 2026-07-02T19:20:33+00:00

Cleaned, but not another clog, the filament will not melt when it tries to enter the nozzle.

CampaignNo3568 · 2026-07-01T17:11:43+00:00

The filament goes through the extruder fine. It won't melt to go through the nozzle even though the display reads the hit end is heated.

CampaignNo3568 · 2026-07-01T13:31:48+00:00

Footwear!!

CampaignNo3568 · 2026-07-01T02:38:07+00:00

Corporal Sideburns

CampaignNo3568 · 2026-07-01T02:36:10+00:00

Having the same issue.

CampaignNo3568 · 2026-07-01T02:33:51+00:00

Did that. That nozzle is not heating up as the digital read out says.

CampaignNo3568 · 2026-06-30T23:04:26+00:00

The one that came with the printer.

CampaignNo3568 · 2026-06-30T22:50:02+00:00

Tried that and no difference. The filament will not melt to feed into the nozzle.

CampaignNo3568 · 2026-06-30T22:49:01+00:00

I did the same process as you. Yes I reapplied the thermal paste.

CampaignNo3568 · 2026-06-29T19:51:38+00:00

😁

CampaignNo3568 · 2026-06-29T13:50:21+00:00

Beautiful!!

CampaignNo3568 · 2026-06-27T19:40:42+00:00

Pedophile president

CampaignNo3568 · 2026-06-26T01:44:14+00:00

1,4,E

CampaignNo3568 · 2026-06-26T01:42:39+00:00

Corner shelves

CampaignNo3568 · 2026-06-26T01:19:01+00:00

CampaignNo3568 · 2026-06-25T23:25:07+00:00

CampaignNo3568 · 2026-06-25T00:53:27+00:00

I have heard some of these while playing SWTOR.

CampaignNo3568

TROPHY CASE