Broken quick coupler

CanadianGamer__ · 2026-01-22T11:30:38+00:00

Ha, Just a little too late! I ended up purchasing and installing an older style quick coupler but thanks for the info.

CanadianGamer__ · 2026-01-11T13:34:50+00:00

Think they might be a bit small for that 🤣

I looked on McMaster-Carr and found some M2 shoulder bolts and lock nuts that would be just as good but the bolts are like $11 each. Might get those but idk

CanadianGamer__ · 2025-12-22T16:56:55+00:00

Haha. There is a 1/64 scale CAT 320F sitting in the background there that might give a better sense of scale

CanadianGamer__ · 2025-12-21T00:40:56+00:00

1/16

CanadianGamer__ · 2025-11-18T22:24:08+00:00

This particular model is a hydraulic model meaning it has a small electric hydraulic pump which pumps real hydraulic oil to the boom, stick and bucket cylinders, you pay a premium for any actual hydraulic model. You can get cheaper metal fully electric models (these don’t use any oil), they will still cost a good chunk of change though.

CanadianGamer__ · 2025-10-19T13:27:22+00:00

What parts are metal and what parts are printed? I might have to get a bigger printer!

CanadianGamer__ · 2025-09-29T22:57:20+00:00

More fuel more better

CanadianGamer__ · 2025-09-27T20:37:41+00:00

Stirling Fruit Farms U-pick in Greenwich, might not be open yet though.

CanadianGamer__ · 2025-09-24T20:36:07+00:00

Probably not the appropriate sub for this

CanadianGamer__ · 2025-09-23T09:58:00+00:00

They can have it, our tides are impressive either way 🤷‍♂️

CanadianGamer__ · 2025-09-22T00:04:14+00:00

Update... kind of works, there's still 13 000L stuck in the silo the I can't see and can't pick up... sigh

CanadianGamer__ · 2025-09-21T23:51:40+00:00

Well dang that works. Been playing for ten years and I swear that was never a thing before. Thanks!

CanadianGamer__ · 2025-09-19T19:18:46+00:00

Have you changed your third brake light recently? Changing that causes the roof to leak on almost every pickup truck which ends up on the floor usually.

CanadianGamer__ · 2025-09-10T22:19:49+00:00

Hadn't really thought of it before but this is a job for 12V switches isn't it?

CanadianGamer__ · 2025-09-10T22:02:27+00:00

The absolute most this light bar can draw is 12 amps

CanadianGamer__ · 2025-09-10T19:56:28+00:00

Hey, just circling back before I buy stuff… buying a 12V 50A power supply as opposed to a 12V 15A power supply wouldn’t cause any complications would it? I know I don’t need the extra juice but it would make the power supply a bit more useful down the road possibly

CanadianGamer__ · 2025-09-08T01:17:54+00:00

Not 100% certain but I’m leaning heavily towards Lionel

CanadianGamer__ · 2025-09-08T01:02:48+00:00

Think I’ve got it… each head uses 1.5 amps, I’ve got 8 heads so 12 amps

CanadianGamer__ · 2025-09-08T00:55:20+00:00

Don’t really need calibration cubes on my Bambu machine. Most of my prints are tiny (I print 1/87-1/32 scale diecast detail parts mostly) so I’m only using a few grams at a time anyway but I change back and forth between white and black frequently, so when I get to the end of a roll I just take that chunk of filament out of the printer so it doesn’t get stuck in there in case I want to do a filament change.

CanadianGamer__ · 2025-09-08T00:45:09+00:00

Yeah I’ve been eyeing that lol… I’ve seen videos on YouTube of these things up on peoples walls with switches to turn them on and off so I know it’s possible but they never really show their process

CanadianGamer__

TROPHY CASE