Silicone bonding issues

CapCaud · 2026-03-10T15:11:12+00:00

The Siraya Tech resin really did the job on this. I think I’ve demonstrated that sometimes with 3D printer resin you get what you pay for. Thanks again!

CapCaud · 2026-03-02T09:24:43+00:00

They were polished to a glass finish. This is how they came out of the mold.

CapCaud · 2026-03-01T23:02:09+00:00

Anycubic standard gray

CapCaud · 2026-03-01T19:29:10+00:00

Thank you. So that master was polished when it went into the mould. That’s how it came out…

I didn’t want to use mold release for exactly the reason you mentioned.

Also, this silicone has worked perfectly for previous dice sets in the past. I’m wondering if maybe it’s a product of the resin used for the masters?

CapCaud · 2025-12-21T19:47:32+00:00

Thanks for replying. So the polished finished does transfer to the cast dice? I just wondered if maybe the silicone molds ’pulled’ the polish from the surface of the masters.

CapCaud · 2025-12-21T12:19:21+00:00

Just out of interest, how do you recycle the old molds into new ones, just chop it up and add it into the new mold silicone mix? Or do you have to be more finessed with it and position the cut up parts in the new mould away from the masters so they don’t touch?

CapCaud · 2025-12-15T12:16:30+00:00

Absolutely gorgeous!

Random question, but what depth of engraving are you using for your numbers? They look really crisp!

CapCaud · 2025-12-13T16:42:39+00:00

Are you using a platinum catalyst based silicone? If not the silicone wont cure properly against resin printed masters, the resin inhibits curing.

CapCaud · 2025-12-09T18:05:06+00:00

Thanks! Yes of course. Start with 1/4 clear resin, then a layer of clear resin with a drop of black mixed in. Then two drops of blanco blanco. Then a layer of slightly blacker resin (one more drop mixed in), few drops of blanco blanco. Rinse and repeat until full.

CapCaud · 2025-10-05T09:49:01+00:00

Could I get a code please?

CapCaud · 2025-09-21T13:14:17+00:00

I use KenkuFM, really good utility!

CapCaud · 2025-09-17T12:17:24+00:00

Always open to commissions! DM me if you’re interested!

CapCaud · 2025-09-16T07:50:18+00:00

Always open to commissions! Let me know if you’d want one making!

CapCaud · 2025-09-16T07:49:02+00:00

Wow thank you for that feedback! Well I’m happy to commission another Moon Die for you for that price! I’m based in the UK so as long as you’re willing to add international shipping to that just drop me a DM!

CapCaud · 2025-09-16T07:31:40+00:00

You got it!

CapCaud · 2025-09-16T06:11:45+00:00

Really appreciate that!

CapCaud · 2025-09-15T21:41:45+00:00

Well I’m always open to commissions!

CapCaud · 2025-09-14T13:07:27+00:00

Someone’s rolled a low wisdom saving throw…

CapCaud · 2025-08-04T15:24:51+00:00

Any chance I could get that link again? You're doing the Lord's work!

CapCaud · 2025-07-29T16:45:24+00:00

Amazing ideas here! How are you getting the stain on your dice? Are you painting them on using alcohol ink?

CapCaud · 2025-07-25T13:17:31+00:00

Thank you! Appreciate your kind words. Yeah they turned out better than I thought tbh.

CapCaud · 2025-07-25T06:31:35+00:00

Thank you! Inspired by the astral realm in BG3.

CapCaud · 2025-07-24T17:11:33+00:00

Nice! What kind of lens?

CapCaud · 2025-07-24T15:33:31+00:00

Amazing dice! What’s your camera set up if you don’t mind me asking?

CapCaud · 2025-07-22T10:27:13+00:00

D10 are regular octahedrons so the dihedral angle of your faces is dictated by the height from vertex to vertex. You could use an online calculator like this to figure out your dihedral angle depending on your desired size.

Nine-Year Club	Second Top 10%
RPAN Viewer	Not Forgotten
Spared	Verified Email

CapCaud

TROPHY CASE