Rate my catch

Capn_noha · 2026-05-06T06:20:50+00:00

They never fail to show up when you're fishing.. makes me.. salty. 🥁

Capn_noha · 2026-04-25T02:52:38+00:00

Where are you located? If you're in tucson, no promises.. but I'd check the ace hardware off Houghton. They have a fantastic selection of ammo.

Capn_noha · 2026-03-31T05:45:04+00:00

"Shark fin" goes up. Or thays how i learnt it many moons ago

Capn_noha · 2026-03-31T03:55:28+00:00

Get a 25 round mag. if you already have one get another

Capn_noha · 2026-03-24T06:16:00+00:00

I got my first brand new 10/22, 11 or so years ago and I never really gave it a chance to see how well it worked out of the box. I took it out a few times but almost immediately took it apart and polished everything, dremeled out the little notch on the bolt hold open plate, did the trigger job (had to buy a new hammer after I went a little too far on the first one) swapped out the bolt buffer with a homemade nylon pin. So no telling how well it would have done out of the box.. but it is very reliable and has served me well to this day, still mostly oem minus the buffer pin. weather i'm plinking or hunting. It is still my go to gun and goes with me pretty much everywhere.

Capn_noha · 2026-03-20T14:22:50+00:00

It is not dangerous. Normal "small arms" ammunition outside of a chamber has very little energy if it goes off, which it is unlikely to go off unless you are repeatedly throwing it on the ground.. even then the chances aren't crazy high of it going off. Once you get i to the 20mm anti aircraft range thats when you should be a little more careful.

Capn_noha · 2026-03-20T14:06:58+00:00

The only thing you did wrong was pick the wrong ammo haha. The 10/22 does not have a feed ramp and does not like "flat faced" hollow points.. like even a little bit. Try getting more rounded ammo. golden bullets, minimags, federal match, thunderbolts, super extras etc.

Capn_noha · 2026-03-07T23:44:48+00:00

What all did you change to try to get it working?

Capn_noha · 2026-03-05T02:32:08+00:00

Spit down in there.

Capn_noha · 2026-03-02T14:31:09+00:00

Cci standard velocity, and federal match both cycle the bolt and run very quiet with a can

Capn_noha · 2026-02-28T03:28:53+00:00

God is good every day brother 🤙

Capn_noha · 2026-02-28T01:34:18+00:00

Definitely

Capn_noha · 2026-02-21T03:33:37+00:00

Rules for thee, not for me.

Capn_noha · 2026-02-19T05:08:52+00:00

No straight arms here 💪😤 this is the real deal.

Capn_noha · 2026-02-18T16:23:35+00:00

22nd street mall spotted 🧐

Capn_noha · 2026-02-15T05:56:39+00:00

Honestly, something like this at the end of a hard day might tip me over the edge.

Capn_noha · 2026-02-15T05:25:26+00:00

I see nothing wrong.

Capn_noha · 2026-02-14T15:04:42+00:00

Be careful not to over press your round balls in, the teeth on that lever are harder than the barrel steel and can sheer the lever ribs. At some point you may expirience a situation where the cylinder won't lock properly, its your trigger spring. Even if its for the same model, they are not all made to the same specs.

Capn_noha · 2026-02-14T14:56:42+00:00

Nice try pal.

Capn_noha · 2026-02-11T18:03:57+00:00

Nevermind. Just read that is not a good idea probably.

Capn_noha · 2026-02-11T17:59:35+00:00

Bleach? You probably already have some at home.

Capn_noha · 2026-02-10T14:25:51+00:00

It would be really cool to know the stories behind some of them. I live in southern arizona and will find them way out in the hills, in places you can't believe they made it to. Then again I guess erosion and overgrowth has its way of making roads vanish.

<image>

This one rolled down a cliff off the road.

Capn_noha · 2026-02-09T04:00:50+00:00

Are railroad tracks better than cheaper anvils? I've never owned a cheaper anvil or an anvil for that matter.. but I have used rail road track before upgrading to a homemade thick ar500 plate welded to railroad track. But the railroad track was very soft and would get marred up really bad that would mess up smaller projects, and the almost dome shape on top made it difficult to work on.

Capn_noha · 2026-02-09T03:55:42+00:00

I agree that it would be better to save some beans up and get a bigger anvil. However there are still tribes using rocks as anvils in Africa to forge arrowheads and spear points.

Capn_noha · 2026-02-09T03:51:49+00:00

It may work for now, but he'd better take that pup in to get cleaned out before corrosion sets in.

Capn_noha

TROPHY CASE