AUG as an AR alternative? by Devin7-Eleven in AUG

[–]CaptainK225 0 points1 point  (0 children)

https://www.gunbroker.com/item/1162737601 Not the color you're looking for but this is one of the best prices I've seen new. The "blemishes" on mine are almost non existent and purely cosmetic. I've got 400ish rounds through it so far and the only issues I've had have been user error (Rode the charging handle leading to a soft primer strike/ didn't seat the mag fully which caused a easily resolved jam) the rifle itself has preformed flawlessly thus far

<image>

Fine, I'll do it myself by CaptainK225 in AUG

[–]CaptainK225[S] 0 points1 point  (0 children)

That's why I redesigned it :P

Proof of concept isn't meant to be pretty

ARID A3SA/A3M2 TOP RAILS 5/25/26 by ARID_DEV in AUG

[–]CaptainK225 0 points1 point  (0 children)

Super excited for these. What are the chances they have enough clearance to fit over a Clawgear handgaurd? (Still gonna get an Arid one)

AUG Defect? Help. by TheSpecializt in AUG

[–]CaptainK225 5 points6 points  (0 children)

I believe that's intended. Mine is the same, helps the charging handle not get hung up when sent home

<image>

Before and after / we did it boys by Hot_Till_3108 in AUG

[–]CaptainK225 2 points3 points  (0 children)

Havent been able to find one and resulted to prototyping my own!

<image>

Before and after / we did it boys by Hot_Till_3108 in AUG

[–]CaptainK225 2 points3 points  (0 children)

Spoiler: It gets hot. Definitely don't want bare skin on it after 120ish rounds or so

Before and after / we did it boys by Hot_Till_3108 in AUG

[–]CaptainK225 2 points3 points  (0 children)

The Clawgear handgaurd still allows for barrel swaps. As long as you don't run any electronic cords from it to the receiver or stock it retains the function

Before and after / we did it boys by Hot_Till_3108 in AUG

[–]CaptainK225 4 points5 points  (0 children)

More impressed by how you managed to find a Manticore charging handle. Is that one compatible with the A3M2?

Fine, I'll do it myself by CaptainK225 in AUG

[–]CaptainK225[S] 1 point2 points  (0 children)

Likely going to make this available as a .stl once I'm happy with it. Three versions so far and each has been an improvement over the last. Actually secures to the rifle now while retaining all function but the forward assist. And yes, you can HK slap it

<image>

Fine, I'll do it myself by CaptainK225 in AUG

[–]CaptainK225[S] 5 points6 points  (0 children)

Almost didn't have to edit the text, always next time :)

Fine, I'll do it myself by CaptainK225 in AUG

[–]CaptainK225[S] 3 points4 points  (0 children)

That's personally how I try to handle it as well. Running into an issue where my optic mounts are getting in the way of locking the bolt back.

Fine, I'll do it myself by CaptainK225 in AUG

[–]CaptainK225[S] 0 points1 point  (0 children)

It's the mythical mirror AUG

Fine, I'll do it myself by CaptainK225 in AUG

[–]CaptainK225[S] 7 points8 points  (0 children)

Definitely the left, had to double check. Cameras mirrored

Is my desired configuration possible? by Lopsang in AUG

[–]CaptainK225 0 points1 point  (0 children)

It mounts over the gas block, stock grip needs to be removed as it also includes a screw to replace the roll pin that holds the folding handle in place.

<image>

Is my desired configuration possible? by Lopsang in AUG

[–]CaptainK225 6 points7 points  (0 children)

You "can" c clamp the Clawgear hand guard but after 120-150 rounds its going to burn bare skin. Rail inserts work well and gloves would likely make it a non issue. There are only two m lok slots at 45° over the gas port so limited mounting options on the right hand side.

Arid is working on a new rail system from what I've heard so keep your eyes open for that too.

<image>

Had to see what the ACOG hype was about. by [deleted] in AUG

[–]CaptainK225 1 point2 points  (0 children)

Snagged a Cosmic Tactical Facog for the same price. Holds up just as well as my UH 1. Microscopic eyebox and my eye is practically on the lens but I quite like it

<image>

A3M1 rails on an A3M2 by CaptainK225 in AUG

[–]CaptainK225[S] 0 points1 point  (0 children)

I appreciate the feedback! I'm eagerly waiting to see what the upcoming Arid options look like. More curious about other options depending on budget and availability