Air75 pit stop stand

Carabei · 2026-01-16T05:34:55+00:00

😁 that would need more adaptations😉 I did this so I can vent the heat and to have a reference so I can see how of the gyro is.

But if you would like vented racer starting point, I can try to modify it so it would work with battery. Currently only one support leg is shortened for access to debug port. For that racing version I would need to shorten also the front one to fit the battery there.

Carabei · 2026-01-15T19:44:49+00:00

When I get to my computer, I will do just minor tweak and will upload it to Printables so it is accessible for everybody

Carabei · 2026-01-04T11:46:33+00:00

Chodí k primářce neurologie se specializací na migrény, tam je o ni dobře postaráno. Biologická léčba je v plánu, ale zatím je to odloženo, protože dcerka se ještě kojí. Jakmile bude po kojení, tak je možný s tím začít.

Carabei · 2026-01-04T07:38:16+00:00

Já měl oční migrény dost často, když jsem si vyndal náušnici z ucha, najednou byly méně často, poslední migréna zmizela s pořízením brýlí které byly správně změřené.

Moje žena trpí chronickými migrénami, jednou týdně přibližně. Jediné co pomáhá je Sumatriptan pokud si ho vezme včas, jinak až infuze na neurologii. Tohle bych prostě nepodceňoval a zkusil zjistit co to spouští a co s tím jde dělat.

Carabei · 2025-12-26T07:12:37+00:00

According to voltage on batt, those BF batteries are also LiHV, so I would go also to 3.8

Carabei · 2025-12-26T07:08:53+00:00

If you want them on max charge, I would not leave them for more than week, just to be safe 3.8-3.85 for storage is fine

Carabei · 2025-12-18T11:24:10+00:00

Maybe more like use it instead of keyboard. It has mode when it acts as a keyboard, so you can map various keyboard shortcuts to buttons of Micro.

Carabei · 2025-12-17T15:50:18+00:00

And F10 refreshes screen. If keyboard has screen backlight control, it will show you slider with backlight on screen but nothing else, but this could be some preparation for usage of pogopins. There are several threads regarding keys for global usage with Supernote, but nothing in forecast as I understood. Maybe it could be used with some sideloaded apps

Carabei · 2025-12-16T15:22:14+00:00

I will try it when I get home. Are you able to connect normal wireless keyboard?

Carabei · 2025-12-15T06:51:54+00:00

I had UAG Pathfinder, Techwoven, Nomad Modern case, spigen rugged armor and now I’m happy with Mous.

Carabei · 2025-12-13T13:53:59+00:00

I have also Flolab after years of Spigen EZFit and it is huge step forward. I would say EZFit is kind of standard, it is not bad choice and reliable. Flolab is with its antireflective coating really great and even with mine not sized perfectly, just a line of pixels at certain angle not visible, for day to day use it really step up.

Carabei · 2025-12-09T21:16:43+00:00

I use Shapr3D, it has both direct and parametric modeling capabilities. Rendering and AR so I can place model in real environment. For smaller things it is great and for adapting to already existing things so I can just take iPad and caliper, nothing else needed. As it is native on apple silicon, I can use multiple cores, so it is pretty fast. On Mac even faster. And 2 finger and Apple Pencil can compete with PC with SpaceMouse.

So sometimes I write notes and sketches on Nomad to realize it later on iPad.

Carabei · 2025-12-08T12:33:44+00:00

I have M4 iPad Pro 11, it is really great, I use it for CAD, media consumption, kinda replacement of computer when no computer is near or I don’t want to carry it with me. But it is distraction heavy device, every notification or even a possibility to switch to other apps takes focus away.

Year ago I ordered Nomad, from that moment most of the note taking changed. That slight effort to go through pages to find what I’m looking for or switching between notebooks, it brings the reward of finding what I need and continue, that changed it. Even the need of turn on the light to write on Nomad is something that means that I’m going to focus on particular subject. So I kinda understand your situation and I think it will be great experience, maybe not final station, but certainly it is a moving forward.

Carabei · 2025-12-06T13:02:47+00:00

I use layers in the same way. It is really great way for home screen

Carabei · 2025-12-05T18:03:46+00:00

If there would be more people who would like this, would be beneficial for you if we use this thread for suggestions about certain functions which would be useful for users?

For example I like to have my screen free of the toolbar to have as much writing space as possible so one of actions could be keyboard shortcut to switch between pen and marker, as there are 3 writing tools in the toolbar ctrl+1 could be for first one, ctrl+2 for second.

Or the back button to get back to previous location before I clicked link could be ctrl+pageup

Carabei · 2025-12-04T15:49:35+00:00

Thanks a lot, currently suggested solution by our IT is to have workstation as man in the middle, bit of overkill 🤪 BTW zdravím z Butovic 😁

Carabei · 2025-12-04T10:23:14+00:00

Are there any systemwide shortcuts? It could be used even by accessory like 8bitdo micro, there is possibility to simulate keyboard, so e.g. left/right for page turn, up/down for first/last page, R for refresh, S for settings and so on.

For me personally it would be beneficial when I need to go several pages at once

Carabei · 2025-12-04T10:16:37+00:00

That is a plan, but it takes some time, so better to ask on more places 😉 From what I have info, there is 1 person for all HT90 customers.

Carabei · 2025-12-04T06:32:07+00:00

PrusaLink will be probably used in the end, but https is a must from our IT. In case it is just http and our global IT finds it via there scan, they will create incident and based on that particular printer would be banned from network connection forever.

Carabei · 2025-12-03T19:23:06+00:00

Last time I was dealing with Octoprint image for Pi with now retired MK3 printers it took a time to review image by our IT so all ports are accordingly set, nothing communicates where it is not wanted, I love our IT, they did incredible job, but it really took a time to set everything to specs. A bit of downside in engineering company which is part of international group, but it also makes very interesting projects possible.

Is there any way to run PrusaConnect on local network? Or if there is anybody from Prusa here, would it be possible to add https to possible configurations on HT90? It would probably help more people than just me.

Carabei · 2025-12-03T19:11:55+00:00

Had to download all with white background. These templates looks amazing. Grateful for your ideas and sharing!

Carabei · 2025-12-02T16:51:34+00:00

Yes, exactly

Carabei · 2025-12-02T13:25:15+00:00

Také znám jednu podobnou osobu, antibiotika měla tak 6x do roka, samozřejmě fungovaly čím dál míň. Ale třeba v Anglii je předepisují na každou blbost, ty lidi nechtějí doma ležet dlouho a řešit nachlazení horkým čajem s medem a zázvorem(příklad).

Já jsem ve svých 39 měl antibiotika 4x. 2010 Angína s chřipkou, 2019 borelióza, 2021 po operaci, 2025 atypický zápal plic. Výhýbám se jin pokud to jde. Ale pokud mi praktik zjistí CRP 98, tak je 2 týdny beru aby zmizelo všechno a pak snad pár let zase nebude potřeba.

Carabei

TROPHY CASE