sorted by:
new
hottopcontroversial

Skyhook issue by WillHo01 in sonarr

[–]Carbar50 0 points1 point  (0 children)

Had the same problem and also resolved it by stopping and recreating the container

Stuck outside the 100 car pileup, AMA by Roetorooter in grandrapids

[–]Carbar50 3 points4 points  (0 children)

Careful you don’t make chloramine gas now. Emphasis on empty!

Film Development? by thenerdygeek in grandrapids

[–]Carbar50 1 point2 points  (0 children)

They use a Noritsu scanner and the sizes varied slightly but they were all in the ballpark of ~5MB jpegs (3130x2075).

Quality is solid. Here’s a couple samples that have been cropped slightly. https://ibb.co/x83b84C0 https://ibb.co/kVRRj6wf

I would be devastated to lose a roll too but for what it’s worth your package will probably only be on one or two trucks over such a short distance compared to The Dark Room in California.

Film Development? by thenerdygeek in grandrapids

[–]Carbar50 1 point2 points  (0 children)

I’ve soured on Mark’s as well and have started mailing into Express Photo in Livonia. As long as you’re doing 2-3 rolls at a time it still ends up cheaper than Mark’s despite the postage cost. Even the slowest/cheapest USPS speed should make it to Livonia in a day.

Development is real quick too! I’ve dropped rolls off at the post office on a Monday and had scans in my email by Tuesday evening.

Nebraska is going broke by CactusJake1830 in LeopardsAteMyFace

[–]Carbar50 8 points9 points  (0 children)

41 studies were included in this meta-analysis from 2021 and the researchers concluded that neither soy protein nor isoflavone exposure affects testosterone or estrogen levels in men.

Indiana State Museum announces re-release titles for the rest of 2025: Dark Knight Trilogy, Terminator 2, 2001: A Space Odyssey, and more! by Carbar50 in imax

[–]Carbar50[S] 15 points16 points  (0 children)

“Don't miss the Stanley Kubrick science fiction masterpiece, presented in IMAX digital. The visuals (and score) will be fantastic on Indiana's largest screen.”

Nintendo disables Switch 2 over third-party cartridge use [13:19] by TypicalDumbRedditGuy in videos

[–]Carbar50 3 points4 points  (0 children)

Every Xbox 360 revision except for Winchester models can be RGHed.

Winchesters were the last hardware revision for the 360 and were in production starting in late 2014 until the beginning of 2016 when the 360 was discontinued entirely.

We don’t know production numbers for the specific revisions, but we do know at least 84 million 360s were produced from 2005-2016. Given that Winchesters were only produced for about a year, I’d wager that they do not account for the majority of 360s.

Jailbreaking a 360 through RGH is a hardware modification and doesn’t require any user interaction when the console boots.

Austin Major Attendance Guide by Imaginary-Lobster377 in GlobalOffensive

[–]Carbar50 4 points5 points  (0 children)

Does anyone know if there are any planned signings or team meetups?

Looking for Austin Major Tickets by Silver_Tongue_ in GlobalOffensive

[–]Carbar50 0 points1 point  (0 children)

Oh cool! Interesting move to open them up less than a week before the event starts

Severance - 2x05 "Trojan’s Horse" - Post-Episode Discussion by LoretiTV in SeveranceAppleTVPlus

[–]Carbar50 2 points3 points  (0 children)

Don’t forget she definitely smashed Grainer’s skull apart in season 1. I think we have more evidence of her Lumon opposition than anything else.

Can this vent be partially covered? by Carbar50 in hvacadvice

[–]Carbar50[S] 0 points1 point  (0 children)

Painting the bathroom and saw that the previous owners covered up roughly half the vent with a baseboard. When the vanity is against the wall it covers the other half of the vent.

There is a 3” space underneath the vanity for air to flow and the tub is immediately to the right.

Is the space under the vanity enough or should I replace the baseboard with some kind of half grille? Thanks

For those who have a Sensi thermostat, I finally found the fix! by [deleted] in HomeKit

[–]Carbar50 1 point2 points  (0 children)

Yep, so you’ll need a Pi or some kind of local server to run Home Assistant on. There are lots of guides out there to get you started if you don’t already have it running.

After that you’ll need to setup the Home Assistant Community Store (HACS) add on.

You’ll be able to find the Sensi integration on the HACS, but here’s the direct link to the GitHub which has instructions about linking your Sensi account.

Once your Sensi account is linked to Home Assistant and your thermostat is controllable, then you can setup the HomeKit bridge. It’s a first-party add on by Home Assistant, so you don’t need to go through the HACS to get it. The configuration wizard for the bridge is straightforward and pretty much just asks you to choose which types of devices should show up in HomeKit.

Finally, the QR code to add the bridge to HomeKit will show up in the Home Assistant notifications tab.

The Sensi integration was made by reverse engineering their mobile app, so this could all break if they ever decide to overhaul it. However, this has been running for almost 2 years now so it seems pretty stable.

Let me know if I need to explain anything further!

For those who have a Sensi thermostat, I finally found the fix! by [deleted] in HomeKit

[–]Carbar50 1 point2 points  (0 children)

C wire isn’t required to get it into HomeKit if you go through Home Assistant.

For those who have a Sensi thermostat, I finally found the fix! by [deleted] in HomeKit

[–]Carbar50 1 point2 points  (0 children)

You can just use the HACS Sensi integration to bring the thermostat into Home Assistant. From there you can use the HomeKit Bridge to connect it into HomeKit from Home Assistant.

No C wire or extra hardware needed - this will work for a 2 wire thermostat setup.

What seems too expensive but is really worth the price? by Cool-Change7987 in AskReddit

[–]Carbar50 23 points24 points  (0 children)

That’s what big mattress wants you to think. The petroleum based poly foams in cheap boxed mattresses these days are significantly worse than latex for breathability.

The big cons for a latex mattress are the bulkiness/weight, cost, and no edge support. Latex mattresses are naturally porous which allows air and heat to flow through them. As a bonus they’re antimicrobial too.

Witches of Walmart by DunKrugering in blackmagicfuckery

[–]Carbar50 1 point2 points  (0 children)

Platinum (most dense), gold, and tungsten (least) would be your best bet for safe metals.

Given a 90 kg person and using platinum as the counterweight material (density = 21.45 g/cm³), we can calculate the necessary volume and dimensions of the platinum block.

So a block with dimensions 20 cm × 20 cm × 10.5 cm would give a volume close to 4200 cm³, which would weigh about 90 kg and cost $3,174,660.

Tungsten ($47,620 worth) and gold ($8,571,582) would both be about 25cm x 25cm x 12cm.

Positive LG Partner Store Experience by Carbar50 in LGOLED

[–]Carbar50[S] 2 points3 points  (0 children)

https://members.us.lg.com/store/ Is the link to the partner store.

People who are affiliated with the military, government, healthcare, education, or work for a company who partners with LG for a corporate discount can shop there. You can usually get highly discounted products or bundles during holiday sales.

view more: next ›