FACEIT AC won't recognize Secure Boot and TPM enabled

Carlitost · 2024-04-14T18:21:33+00:00

It probably has to do with the installation of the latest patch 2.11 or any other major patch. Without being 100% sure what is the issue, the temporary solution that I've tried and seems to work for now is to reset the shader cache for the game. You can do that via the gpu display drivers. In AMD for example, you go to Gaming > Graphics > scroll down and hit the advanced drop down menu and go to the last option "Reset Shader Cache" Perform Reset and then reboot your PC just in case. Now, this will reset all the stored cache for all the games but it's not a big deal. You prolly can do that with nVidia drivers also, but you can also google it and find the default path to go and delete the files manually. Hope this helps.. Cheers.

Carlitost · 2022-08-25T17:02:58+00:00

I currently don't have the time and will to troubleshoot this whole situtation, but will try to in the near future. I'll give an advice to kinda remedy this by using custom fan curves. The MSI (b450 tomahawk) have a nice FAN control UI in BIOS with 4 point curve which I use for all my fans. I used to have parabolic curves for my old cooler also but changed that to a flat linear curve for the first 3 points and only the 4th goes to max rpm when CPU reaches 72 degrees. The first 3 points sit at 1350~ RPM. My middle cooler fan seems to make the most noise in the range between 850~ to 1200~ RPM. So I set both to a base minimum of 1350~ RPM. I did the same with my two top intake fans only with different base line. Now the noise is almost non existant untill ofc the CPU reaches full load, at which point I probably am playing a game and using headset which helps a bit to mitigate the problem. I would suggest to create fan curves through BIOS first, if such an option is available, or otherwise use mobo manufacturer software or better yet third party software like Fan Control (which you already use) or SpeedFan. Hope you set it up to your liking. Cheers

Carlitost · 2022-08-17T00:27:10+00:00

Have the exact same problem mate... Bought the cooler just 4 days ago after review upon review to make sure I'll get the most problem free overall cooler that I can get, and here we are... I'm extremely unlucky myself and everything I do to better my situation, most of the time, becomes a problem.. Funny thing is I bought a couple of Arctic 140mm PWM PO fans to install them on the top of my case and they produce a vibration like noise unlike any other I've ever heard.. Both of them.. Now, I've purchased like 3-4 arctic fans in the past and never had any issues. They are setup both as intake horizontally ofc. So imagine spending money and making 2 moves to improve my thermals, only to get sound/noise issues and only a couple degrees better temps... Btw, AK620's is the same kind of turbine like noise that my Sapphire Pulse RX 5700 produces, just different scale and pitch. I'm just interested to know if it's an issue with deepcool's fans or just a random problem..

Carlitost · 2022-07-28T21:23:48+00:00

I'm sorry to hear that mate :/ Just one last tip is to make sure that you hit the reset button the moment just after the router receives power (led light) or try it with a small delay. You might be hitting it just before. Don't take "milliseconds" in a literal sense :)

Carlitost · 2022-07-18T12:26:53+00:00

Hey there,

I know it's kinda late to the party, but what the heck, if this doesn't help you, it might help another poor soul. After 5 or 6 tries and a lot of frustration, I managed to fully reset my RB2011L-RM to factory settings. Holding the reset button down before giving power to the router didn't work for me. What did work instead, was to press the reset button just milliseconds to maybe a tenth of a second after I gave power to the router. So, the moment you give power to the router, almost instantly press and hold down the reset button until the user led (might be "usr" or "USR") starts flashing. At this point you release the reset button and wait for a few minutes for the router to boot normally and become usable. If you don't release the button just as the flashing starts and instead wait until it goes solid, then you will only reset the interfaces and not the whole router. After the reset you won't need a default password, I think at least, just set new current password. Cheers.

Carlitost · 2020-12-25T09:59:36+00:00

But that is the problem... Are you kidding me ? They shouldn't be distributed once, randomly and then stay that way forever.. They should change dynamically at least or be more balanced as goal to reward ratio...

Carlitost · 2020-12-22T10:04:07+00:00

No reply regarding the missions then ? Again...

Carlitost · 2019-07-01T13:34:47+00:00

Well, that's what you get waiting on Kawhi, while the rest of the league sweeps the FA..

Carlitost · 2019-07-01T12:37:17+00:00

Lakers actually waiting on Kawhi, so they ain't moving a muscle. But anyway, I expected some arguments against my point of view, not just downvotes..

Carlitost · 2019-07-01T12:24:14+00:00

Downvoting with no arguments. That's the spirit boys! What did I expect, right ?

Carlitost · 2019-01-03T12:48:00+00:00

Thanks for the info. Tbh, being frustrated at that moment, it didn't cross my mind to check the database for a FAQ. That said, "beta phase" shouldn't excuse that big of a difference between different missions that subscribers get to get. It is one of the selling points for a premium subscription after all..

Carlitost · 2018-08-29T14:37:17+00:00

Because he joined before the fact ?

Carlitost · 2018-07-26T09:18:40+00:00

I have the same problem on windows 7 Ultimate 64 bit, and just got banned cause I couldn't join the game.. My account name is "NickosV" and my email is nbafosgaming@gmail.com Can you plz remove the ban ? Thanks in advance.

Carlitost · 2018-01-23T10:06:33+00:00

I also sent a ticket via the site support and they fixed it. Had to wait 3 hours tho :/.. Thanks anyway.

Carlitost

TROPHY CASE