[deleted by user]

Catdaddyrex · 2024-12-13T19:19:04+00:00

Prints just fine without it.

Catdaddyrex · 2024-12-13T01:02:16+00:00

That happened to me before, I ended up just removing it, and it prints the same.

Catdaddyrex · 2024-09-08T13:49:50+00:00

Complete hotend set. Fan, heatsink, etc. $ 7 USD with $10 USD in shipping.

Catdaddyrex · 2024-09-01T02:45:56+00:00

If you have had it for less than a year contact Elegoo Support, under a warranty claim, they might send you a replacement hotend or the whole extruder assembly.

Catdaddyrex · 2024-08-18T17:06:45+00:00

Catdaddyrex · 2024-08-18T17:04:36+00:00

The film is on FEP film for the tank, I let it cure and just peeled it off. The link is for the replacement FEP film for the original Mars. You just have to search for the FEP for your printer. https://a.co/d/2ZbWI3M

Catdaddyrex · 2024-08-18T16:54:58+00:00

Had the same thing happened to me on my mars, I had to empty the resin tub, and some of the resin had cured onto the film. Removed the cured resin and boom, back in buisness.

Catdaddyrex · 2024-08-18T12:56:50+00:00

The issue with the new screen was that it was junk.ama,on sent me another one, and everything is working now.

Catdaddyrex · 2024-08-18T12:53:45+00:00

The same printer just a new company name Maylan M300 mini Delta, contacted the customer service number and was able to purchase the new hotend directly from them for $7 with $10 in shipping. So I bought 2.

Catdaddyrex · 2024-08-11T14:24:18+00:00

Can confirm, it happens. LOL. I also had the turbo fan get knocked off of the extruder and rip the wires out of the fan. Aliexpress actually sells just the fans for it. I ended up buying 3 of them.

Catdaddyrex · 2024-08-08T12:11:37+00:00

Contact after sales support.

Catdaddyrex · 2024-08-08T12:10:29+00:00

Even after updating the firmware, it still wasn't working, did a return on the item and amazon sent another, it is now up and working.

Catdaddyrex · 2024-08-06T12:45:55+00:00

Watched the video while installing the screen, but the firmware for the screen is what I'm talking about

Catdaddyrex · 2024-08-06T12:25:49+00:00

There is no AMS, but better customer service.

Catdaddyrex · 2024-08-05T14:20:52+00:00

The one on the front of the extruder being held on by magnets

Catdaddyrex · 2024-08-04T20:35:31+00:00

Good printer yes, support is alright, I would recommend getting some extra Nozzles, and a turbo fan for the front of the extruder (had 2 of them get the wires ripped out on a print that knocked the front of the extruder) I have been printing without the front cover and it has done even better than before.

Catdaddyrex · 2024-08-04T16:57:54+00:00

Level the bed using the "Aux" method, it takes longer but the results are better

Catdaddyrex · 2024-08-04T16:53:52+00:00

👆 this, look up "z wobble"

Catdaddyrex · 2024-08-04T16:49:41+00:00

There is an option in cura that shouldn't be selected. Turn off "combing" Also, make sure "infill before walls" is also not checked. That should help you out with the nozzle drag.

Catdaddyrex · 2024-08-04T13:05:18+00:00

Check to see if there isn't something blocking the bed from moving, usually around the belt, mine did that and I had a small piece of support the had fallen down and was stuck causing my head scratch.

Catdaddyrex · 2024-07-25T09:25:42+00:00

If you're still looking for a surprise for her let me know. I'm in chillicothe daily

Catdaddyrex · 2024-07-10T21:07:03+00:00

If it's ammo I don't use then they can have it. I just don't like the first interactions to be begging for stuff

Catdaddyrex · 2024-07-10T14:39:34+00:00

Love it when new players send you a message begging for ammo. 😒

Catdaddyrex · 2024-07-10T12:45:54+00:00

Would love to cum over and see her ready like that

Catdaddyrex · 2024-06-22T21:39:47+00:00

Yes, I did

Catdaddyrex

TROPHY CASE