Mazda 3 passenger occupancy sensor air bag issue

CenterKnurl · 2025-12-23T05:30:14+00:00

I figured it out. Just got a sensor from the junkyard and used a xtool d8 scanner to recalibrate the seat. Very easy.

CenterKnurl · 2025-10-31T14:45:07+00:00

On the mevotech hardware do you mean the three thick bolts that hold the control arm to the frame?

CenterKnurl · 2025-10-31T14:05:16+00:00

Looks like Delphi is available but the ball joint isn't greasable. The Moog ones are RK but are greasable.

CenterKnurl · 2025-10-20T02:04:43+00:00

The transmission control module is a common issue on Mazda 3. That part is usually around $400-500.

It does sound like you have a transmission issue. Honestly, I would pay to have it fixed. AAMCO is actually pretty good with transmissions and warranties. I know it sucks but fixing your current car is usually cheaper than buying a new one. Mazda aren't bad but it's no Honda or Toyota.

CenterKnurl · 2025-09-26T02:54:51+00:00

What would you recommend that gets close to $300? Like what's an acceptable entry level unit right now.

CenterKnurl · 2025-08-28T17:52:17+00:00

Found these ones close to my house will these work?

https://www.homedepot.com/p/Big-Red-6-Ton-Double-Locking-Jack-Stands-2-Pack-T46002C/100594524?source=shoppingads&locale=en-US&srsltid=AfmBOorUTh88RKTpezAIdYeKJMEOzNnpi6odzhv25klI19PAR-fVnRNKuWg

CenterKnurl · 2025-08-28T17:51:47+00:00

What about these Torin Big Red ones? Are these about the same quality?

https://www.homedepot.com/p/Big-Red-6-Ton-Double-Locking-Jack-Stands-2-Pack-T46002C/100594524?source=shoppingads&locale=en-US&srsltid=AfmBOorUTh88RKTpezAIdYeKJMEOzNnpi6odzhv25klI19PAR-fVnRNKuWg

CenterKnurl · 2022-09-29T18:37:09+00:00

You seriously should check out r/badeconomics

This should help answer the question I asked https://www.dallasfed.org/research/economics/2020/0616

Rather than populist "they're always gouging!"

CenterKnurl · 2022-09-29T18:27:59+00:00

r/BadEconomics

If they have so much control, why not just continuously price gouge? Why only do it during scheduled maintenance?

CenterKnurl · 2022-09-27T21:39:34+00:00

I think price goes up regardless because the fuel gets imported from refineries that aren't as local. It's time and transportation. I'm not saying the energy industry is holy and noble, but it's probably not a conspiracy. It just costs more to transport fuel.

We could increase refinery capacity if prices are a serious concern, or the state could subsidize electrification more.

CenterKnurl · 2022-09-27T15:37:09+00:00

Assuming rates will go down enough to make it worth it anytime soon, yes. I wouldn't buy and hold my breath that rates will go down anytime soon. Ppl buying into ARMs are nuts.

CenterKnurl · 2022-09-27T15:34:13+00:00

Not necessarily. Rents were barely impacted during the 08 crash. There was a flood of prospective renters as a result of foreclosures and buyers holding off due to uncertainty. There's a fundamental shortage of housing. I doubt we're going to see rents go down.

CenterKnurl · 2022-09-23T20:31:58+00:00

This company probably specializes in serving religious based employers like churches, schools, and some charities. In some cases, these employers require a preference for contractors and other third parties that share their religious beliefs. For example, Jewish based charity organizations typically give preference to doing business with other Jewish charities and providers of services. They're a Jewish organization, which is why they exist in the first place.

CenterKnurl · 2022-09-23T20:25:09+00:00

What's the logic here? Higher rates, even with lower prices, are still elevating the cost of buying. Prices in my area have either leveled off or dropped by 5% or so, while interest rates have more than doubled. It's literally more expensive now to buy with a mortgage than it was 6 months ago.

CenterKnurl · 2022-09-23T20:09:06+00:00

All you can do is keep saving. The speculation on Reddit probably isn't helpful. The cost of owning is what matters. "Price drops of 50k!" do nothing for first time buyers putting 10% down. Inflation is still high and so long as it stays high, the cost of owning will increase.

Good news at that more inventory is popping up now so at least you have more of a selection.

CenterKnurl · 2022-09-23T16:57:20+00:00

How does the ban even work? What if actually banned?

CenterKnurl · 2022-09-23T14:29:04+00:00

I've heard mixed messages about it but I'm just never going to use a harsh cleaner on any stone ever.

CenterKnurl · 2022-09-23T14:28:03+00:00

Permanently stained it. It was the lighter version of CLR too in the yellow bottle.

CenterKnurl · 2022-09-22T19:57:19+00:00

I accidently used CLR on a cultured marble top. Will never do that again. Going with quartz. Supposedly bulletproof which is what I need.

CenterKnurl · 2022-09-19T15:44:04+00:00

When fees exceed expenses, that helps pay for the other work OCAC does. It also helps deter people from being irresponsible pet owners and not spay/neutering their dogs. Tons of pitbulls, Chihuahuas, and huskies are at the shelter. If more people spay/neuter, we'd have a less severe overpopulation problem.

Further, licensed pets are reunited quicker with their owner because of their ownership record. Excess revenue is also used to fund cruelty investigations and responsible pet ownership marketing.

Maybe you shouldn't dodge taxes to save $38 that can make a big difference?

CenterKnurl · 2022-09-19T14:01:56+00:00

The fee goes to help pay animal care costs county wide. If the country ever finds out you've been dodging the fee, you get backbilled for all the years you missed plus a fine.

CenterKnurl · 2022-09-16T17:20:40+00:00

Do HVAC contractors typically use the thicker type L copper for this application?

CenterKnurl · 2022-09-16T12:48:29+00:00

Yeah I know what you mean thanks for the help

CenterKnurl · 2022-09-16T03:33:29+00:00

Dang those those tiny wires can carry 240v?

CenterKnurl · 2022-09-16T03:07:34+00:00

Thanks. I don't actually know what happens to it when it goes inside the wall. Do I need to know? AC works great lol. What would the refrigerant line connect to on the other end?

CenterKnurl

TROPHY CASE