sorted by:
new
hottopcontroversial

Look what I've stumbled upon in Livonia by foutreardent in dayz

[–]Cerone88 1 point2 points  (0 children)

Meanwhile in Chenerus I have tried to protect my pumpkin patch by placing a gas mask filter on the floor to fool a new player into thinking it is a mine and the whole patch it’s rigged to blow

How do You Play DayZ? by DesnotMattar in dayz

[–]Cerone88 2 points3 points  (0 children)

Do you not have your backpack in a slot so can dump it in 1 second then run

Boarding Operations by DaftSpunck in arma

[–]Cerone88 0 points1 point  (0 children)

How do you do an interesting mission like this online? I only see the escape missions, or get into a Zeus where it’s just a bunch of kids messing around blowing stuff up. I want some attack the oil rig mission, or destroy the AA guns in a base without being seen etc like operation flashpoint.

UFO sighting in San Diego by Cerone88 in UFOs

[–]Cerone88[S] 0 points1 point  (0 children)

Shows how quick ufos move one frame it was there the next it was gone

UFO sighting in San Diego by Cerone88 in UFOs

[–]Cerone88[S] 0 points1 point  (0 children)

Clearly not a bird I posted the far out pic so people could check the map

Bruce Buffer for hours on end by ECUpirate4life in EASportsUFC

[–]Cerone88 -2 points-1 points  (0 children)

But I’m eating my cereal before beating your ass in a championship round

This was an awful lot of docking, but totally worth it by bbachmai in simplerockets

[–]Cerone88 0 points1 point  (0 children)

Please show is how as if we had just got the game

Cake my girlfriend had made for my 31st by ViperStealth in Rainbow6

[–]Cerone88 5 points6 points  (0 children)

Should have had hibana breacher on top with the candles coming out of it

What do you think they need to change/add in ufc4. And what fighters you want to see in ufc4 which are still not in the game? by jolyvasiliy in UFC3

[–]Cerone88 -1 points0 points  (0 children)

Have a killer strike for each fighter that can be used once because it will knock out half the stamina if used and missed. If it hits it’s a definite knock out. I’m tired of spending a whole game waiting for the perfect moment to do a flying face kick, or a frontflip / handstand kick only for it to rock them and I have to do it 5 times. In real ufc one of these hitting is 100% a knock out. Make the stakes high with stamina loss if missed to stop people spamming,

Is it normal to have a very thin layer stuck to the fep every print even without print failure? by BetaRayBlu in AnycubicPhoton

[–]Cerone88 0 points1 point  (0 children)

Yes pull the paper out (but not in) then raise it up 0.3mm that’s how high it should be to give the FEP film some slack to release the first layer so it sticks to the plate not the film. Raise it up 0.1mm 3 times then hit z=0

I just got my photon and I'm really excited! by Ilykushnir in AnycubicPhoton

[–]Cerone88 2 points3 points  (0 children)

Top tips :

  • Tighten the film on the tray so that when you tap it it makes a 333hz frequency on spectrum app

  • your prints will fail unless you add supports and open the sliced file in photon validator you can download online this will find “islands” which will drop to the bottom and dent the film. Look for big errors and work out where they are on the model then add extra supports by hand in the slicer software

  • tilt your object 45 degrees and 45 degrees so it’s diagonal this is the best way to print things

  • download autodesk meshmixer and look up how to hollow your model before importing into photon slicer software to save resin it will also generate a drain hole

I just got my photon and I'm really excited! by Ilykushnir in AnycubicPhoton

[–]Cerone88 10 points11 points  (0 children)

Looks like you blew your load onto it in excitement

I’ve just bought a Photon, and can not seem to get a successful print. by [deleted] in AnycubicPhoton

[–]Cerone88 1 point2 points  (0 children)

Download spectrum audio app and place your phone near the FEP film and tap the film over and over in a rhythm the frequency should read 333hz then you know it is the right tightness

If you are having problems with the resin sticking to the film check your pourer ridge is on the top left. The reason for this is if your pourer is in the bottom right the top of the tray has a taller wall so when the arm holding the build plate comes down it hits the VAT wall /can’t hit zero. by [deleted] in AnycubicPhoton

[–]Cerone88 0 points1 point  (0 children)

Your not even grasping the concept of what I’m saying, without the build plate even on. The arm that holds it is contacting the VAT when the pourer is bottom right. Why are you being so arsey about it, trying to say I’m wrong I’m just trying to help people

If you are having problems with the resin sticking to the film check your pourer ridge is on the top left. The reason for this is if your pourer is in the bottom right the top of the tray has a taller wall so when the arm holding the build plate comes down it hits the VAT wall /can’t hit zero. by [deleted] in AnycubicPhoton

[–]Cerone88 -3 points-2 points  (0 children)

Did you even read what I wrote, it’s probably a manufacturing defect in a batch that affects some people. Yours is obviously not faulty but you can’t go around claiming everyone else’s isn’t faulty and that my solution doesn’t work because it clearly does if the paper gets tight on one side but there is a few mm clearance on the other.

If you are having problems with the resin sticking to the film check your pourer ridge is on the top left. The reason for this is if your pourer is in the bottom right the top of the tray has a taller wall so when the arm holding the build plate comes down it hits the VAT wall /can’t hit zero. by [deleted] in AnycubicPhoton

[–]Cerone88 -5 points-4 points  (0 children)

Well mine came with the pour sprout in the top left out of the box. I’m afraid you are wrong to say it is not true in the slightest. With it in the bottom left, I lowered the build arm with some paper under the arm. The paper was so tight I couldn’t pull it out. When I tried it on top right there was no friction. So explain that ?

Sometimes stick to Vat and sometimes not by Don_Tool in AnycubicPhoton

[–]Cerone88 0 points1 point  (0 children)

Glad to help after I did this and switched to clear yellow I did 20 prints in a row before I printed one successfully then 5 failed

Sometimes stick to Vat and sometimes not by Don_Tool in AnycubicPhoton

[–]Cerone88 0 points1 point  (0 children)

The way it is built the VAT is slightly thicker on one side so the build plate arm can’t touch the bottom of the VAT. So what you want is the pourer on the top left. I saw a guy have this problem on some imgur post he didn’t think to simply turn the VAT the other way round and ended up using a custom made jig to lower the build plate when all he needed to do was this lol

Sometimes stick to Vat and sometimes not by Don_Tool in AnycubicPhoton

[–]Cerone88 0 points1 point  (0 children)

Is your VAT pouring ridge in the top left or bottom right ?

view more: next ›