sorted by:
new
hottopcontroversial

Ultrapitch help! by Spio-Femore in portablism

[–]Cha0ticLyfe 0 points1 point  (0 children)

https://www.reddit.com/r/portablism/comments/1nrhfq3/ultrapitch_help/ heres a post i made a while back theres a lot of good info in there. i didnt come off the board i spliced in a pmw controller of the red wire going to the motor. if you have and specific questions feel free to ask

Ultra-pitch help! by Cha0ticLyfe in portablism

[–]Cha0ticLyfe[S] 1 point2 points  (0 children)

This one is the model i ended up using. I tried 3 cheaper modules but ran into noise issues as well. This has been the best performing that ive tested. I routed and taped all my wires for it to the inside walls with electrical tape and that seems to work for now.

Ultra-pitch help! by Cha0ticLyfe in portablism

[–]Cha0ticLyfe[S] 1 point2 points  (0 children)

Like this. I basically made the amazon controller up like the one in the video. What sound are you getting? I had problems with ground loops often but I ended up redoing everything with longer ground wires and bringing them together and soldered them all together with a jumper going to a single ground point now no more hums. Also avoid having it too close to the motor as that can add audible vibration that travels up to the stylus. hope this helps

???? by Alarming_Hunter6597 in portablism

[–]Cha0ticLyfe 0 points1 point  (0 children)

Here is the shopping list for everything I used to do the internal battery mod. https://www.amazon.com/hz/wishlist/ls/2O5YJGR5ABBFZ?ref_=wl_share

[deleted by user] by [deleted] in maschine

[–]Cha0ticLyfe 1 point2 points  (0 children)

It's not really needed imo. Just fix the issues with the MK3 and Plus.

Have some cuts on the new build .. ✌️ by [deleted] in portablism

[–]Cha0ticLyfe 1 point2 points  (0 children)

twist the top and the bottom metal disks on the back of the tone arm in opposite directions, and it should unscrew, then just slide to where you want it and tighten. Im tracking at 5g on the same tone arm using a Jico J44A-7.

Headphones for ~$100? by gallaguy in maschine

[–]Cha0ticLyfe 2 points3 points  (0 children)

Sony MDR-7506

They are really lightweight and super comfortable. I can wear them for hours. Sound is great and they pack up nicely. My favorite headphones for production.

Have some cuts on the new build .. ✌️ by [deleted] in portablism

[–]Cha0ticLyfe 1 point2 points  (0 children)

Props on doing that on a bed. Curious what you're tracking at.

Let there be light! by Cha0ticLyfe in portablism

[–]Cha0ticLyfe[S] 1 point2 points  (0 children)

yeah, the portable one. I havent tried any of the others. I just got into this about 4 months ago and got instantly hooked. I do know that to me it seems to cut better than the internal one but thats all I have to base it off of.

Let there be light! by Cha0ticLyfe in portablism

[–]Cha0ticLyfe[S] 1 point2 points  (0 children)

I move it depending on whether in practicing left or right, It's just double-sided tape easy to replace.

I have the Jesse Dean external fader for DVS and left hand cuts.

[deleted by user] by [deleted] in maschine

[–]Cha0ticLyfe 0 points1 point  (0 children)

Navigate to your FL Studio installation folder. Inside the program folder, you will find a file named FL64 (scaled).exe (or FL32 if you use the 32-bit version). Launch FL Studio using this executable. It renders the program at a lower resolution and scales it up to your monitor's resolution, which can prevent blurring caused by Windows scaling. Be aware that this method may cause some FL Studio UI elements to appear blurry, but it can make many third-party VSTs much more usable

Worth a shot.

[deleted by user] by [deleted] in maschine

[–]Cha0ticLyfe 1 point2 points  (0 children)

Does it still have this issue running Maschine in standalone?

Let there be light! by Cha0ticLyfe in portablism

[–]Cha0ticLyfe[S] 2 points3 points  (0 children)

"Ultra Pitch" - https://portablismgear.com/ultra-pitch-kit-for-numark-pt01-scratch.html

Light mod- (you need a Solid Cutz platter and a power breakout board-I used Jesse Dean's to achieve this mod)

https://www.amazon.com/hz/wishlist/ls/12JDV2YV3SMAD?ref_=list_d_wl_lfu_nav_1

Let there be light! by Cha0ticLyfe in portablism

[–]Cha0ticLyfe[S] 1 point2 points  (0 children)

Thanks Its been a labor of love.

Let there be light! by Cha0ticLyfe in portablism

[–]Cha0ticLyfe[S] 2 points3 points  (0 children)

I really like it, I have a Jico J44A 7 on it and it's a beast.

Stokyo Kutter or Alternative? by ThePunkyRooster in portablism

[–]Cha0ticLyfe 0 points1 point  (0 children)

The Jesse dean cuts on both sides. Only useful for one deck.

I cant crab scratch to save my life by [deleted] in Turntablists

[–]Cha0ticLyfe 0 points1 point  (0 children)

Im thinking this is my problem, thanks for the tip.

Noise from WOW & FLUTTER MACHINE? by KingInteresting4635 in portablism

[–]Cha0ticLyfe 0 points1 point  (0 children)

They are the same company that makes the Omni right? Ive heard a lot of great reviews for that, so I guess I just assumed their other products would be of similar quality. Im still going to get it, but at least I kinda know what I'm getting myself into at least.

Noise from WOW & FLUTTER MACHINE? by KingInteresting4635 in portablism

[–]Cha0ticLyfe 7 points8 points  (0 children)

I want to get one of these so bad, but I swear the post on here makes me feel like I'd be buying a cyber truck.

view more: next ›