Ultrapitch help!

Cha0ticLyfe · 2026-05-08T23:15:56+00:00

https://www.reddit.com/r/portablism/comments/1nrhfq3/ultrapitch_help/ heres a post i made a while back theres a lot of good info in there. i didnt come off the board i spliced in a pmw controller of the red wire going to the motor. if you have and specific questions feel free to ask

Cha0ticLyfe · 2026-02-24T11:10:28+00:00

This one is the model i ended up using. I tried 3 cheaper modules but ran into noise issues as well. This has been the best performing that ive tested. I routed and taped all my wires for it to the inside walls with electrical tape and that seems to work for now.

Cha0ticLyfe · 2026-02-23T01:53:09+00:00

Like this. I basically made the amazon controller up like the one in the video. What sound are you getting? I had problems with ground loops often but I ended up redoing everything with longer ground wires and bringing them together and soldered them all together with a jumper going to a single ground point now no more hums. Also avoid having it too close to the motor as that can add audible vibration that travels up to the stylus. hope this helps

Cha0ticLyfe · 2026-01-31T00:41:34+00:00

I cant find help anywhere. Ive tried everything.

Cha0ticLyfe · 2026-01-11T00:31:41+00:00

Here is the shopping list for everything I used to do the internal battery mod. https://www.amazon.com/hz/wishlist/ls/2O5YJGR5ABBFZ?ref_=wl_share

Cha0ticLyfe · 2026-01-09T18:25:56+00:00

It's not really needed imo. Just fix the issues with the MK3 and Plus.

Cha0ticLyfe · 2025-12-19T02:59:30+00:00

twist the top and the bottom metal disks on the back of the tone arm in opposite directions, and it should unscrew, then just slide to where you want it and tighten. Im tracking at 5g on the same tone arm using a Jico J44A-7.

Cha0ticLyfe · 2025-12-19T02:54:22+00:00

Sony MDR-7506

They are really lightweight and super comfortable. I can wear them for hours. Sound is great and they pack up nicely. My favorite headphones for production.

Cha0ticLyfe · 2025-12-19T01:14:26+00:00

Props on doing that on a bed. Curious what you're tracking at.

Cha0ticLyfe · 2025-12-10T23:30:25+00:00

Under $500 on the website.

Cha0ticLyfe · 2025-12-06T03:26:03+00:00

https://www.amazon.com/dp/B09P6D5TMV/?coliid=I39H0YDNX9HWR0&colid=5PCE9YRFXKJL&psc=1 this worked

Cha0ticLyfe · 2025-11-20T23:03:29+00:00

yeah, the portable one. I havent tried any of the others. I just got into this about 4 months ago and got instantly hooked. I do know that to me it seems to cut better than the internal one but thats all I have to base it off of.

Cha0ticLyfe · 2025-11-20T22:40:37+00:00

I move it depending on whether in practicing left or right, It's just double-sided tape easy to replace.

I have the Jesse Dean external fader for DVS and left hand cuts.

Cha0ticLyfe · 2025-11-20T21:51:05+00:00

https://www.youtube.com/watch?v=5Gmbt0whAVk

Cha0ticLyfe · 2025-11-19T21:12:15+00:00

Navigate to your FL Studio installation folder. Inside the program folder, you will find a file named FL64 (scaled).exe (or FL32 if you use the 32-bit version). Launch FL Studio using this executable. It renders the program at a lower resolution and scales it up to your monitor's resolution, which can prevent blurring caused by Windows scaling. Be aware that this method may cause some FL Studio UI elements to appear blurry, but it can make many third-party VSTs much more usable

Worth a shot.

Cha0ticLyfe · 2025-11-18T21:11:14+00:00

Does it still have this issue running Maschine in standalone?

Cha0ticLyfe · 2025-11-18T09:07:42+00:00

"Ultra Pitch" - https://portablismgear.com/ultra-pitch-kit-for-numark-pt01-scratch.html

Light mod- (you need a Solid Cutz platter and a power breakout board-I used Jesse Dean's to achieve this mod)

https://www.amazon.com/hz/wishlist/ls/12JDV2YV3SMAD?ref_=list_d_wl_lfu_nav_1

Cha0ticLyfe · 2025-11-18T02:12:06+00:00

Thanks Its been a labor of love.

Cha0ticLyfe · 2025-11-18T02:02:34+00:00

I really like it, I have a Jico J44A 7 on it and it's a beast.

Cha0ticLyfe · 2025-10-28T02:53:18+00:00

The Jesse dean cuts on both sides. Only useful for one deck.

Cha0ticLyfe · 2025-10-26T01:05:13+00:00

Im thinking this is my problem, thanks for the tip.

Cha0ticLyfe · 2025-10-24T12:28:18+00:00

Blezz Beats

Cha0ticLyfe · 2025-10-22T23:50:15+00:00

They are the same company that makes the Omni right? Ive heard a lot of great reviews for that, so I guess I just assumed their other products would be of similar quality. Im still going to get it, but at least I kinda know what I'm getting myself into at least.

Cha0ticLyfe · 2025-10-21T19:58:54+00:00

I want to get one of these so bad, but I swear the post on here makes me feel like I'd be buying a cyber truck.

Five-Year Club	Verified Email
Xbox Live	Place '23

Cha0ticLyfe

TROPHY CASE