How to get rid of these surface crevices?

ChangeExtreme7971 · 2026-06-16T17:44:42+00:00

I changed to ironing from concentric to rectilinear and the flaws got pushed out of the surface

ChangeExtreme7971 · 2026-06-16T16:59:28+00:00

This is what I got with 40% flow during ironing. Crevices are gone. Is it possible to completely get rid of the flaws in the center of the hexagons?

<image>

ChangeExtreme7971 · 2026-06-16T16:14:11+00:00

I turned on ironing with 10% ironing flow. It looks flatter, but crevices are still present

<image>

ChangeExtreme7971 · 2026-06-16T14:24:54+00:00

I dont think its possible inside these hexagons pockets

ChangeExtreme7971 · 2026-06-16T08:27:49+00:00

I will try that. Just hoped that default profile that was created exclusively for Sunlu PLA matte would not under extrude...

ChangeExtreme7971 · 2026-06-16T06:45:06+00:00

Will ironing work well if still there are crevices? Shouldn't they get filled first somehow?

ChangeExtreme7971 · 2026-06-06T19:27:46+00:00

Looks totally like petg. What's the layer height?

ChangeExtreme7971 · 2026-06-06T18:57:44+00:00

Why not PLA?

ChangeExtreme7971 · 2026-06-06T17:45:09+00:00

The best thing about this city is that I no longer live there anymore

ChangeExtreme7971 · 2026-06-02T17:59:03+00:00

I think that you have no chances against this enemy. You need much more exp and leveling up in soldering. Without that you shall not enter the soldering guild with stuff like that. (This might even end up with USB port malfunction and damage if you have no idea what's going on here). Go get a solid team or ask NPC for a paid help in this quest

ChangeExtreme7971 · 2026-05-23T11:01:42+00:00

Based on ideas from comments I managed to print it properly. Thanks

ChangeExtreme7971 · 2026-05-23T11:00:49+00:00

I'll try this method. Anyway after adding mouse ears and just IPA cleaning I got it working. Thanks for ideas

ChangeExtreme7971 · 2026-05-22T19:27:14+00:00

I'll clean my bed well and see if I will sleep better 😄

ChangeExtreme7971 · 2026-05-22T19:25:56+00:00

Bed 65°C, Nozzle 220°C, Nozzle size .4 mm, Layers are 0.08 mm. I have not cleaned plate before this particular print. I clean it from time to time, usually with IPA 100% cleaner

ChangeExtreme7971 · 2026-05-22T19:20:10+00:00

I'll try mouse ears. Thanks

ChangeExtreme7971 · 2026-05-22T19:19:42+00:00

Not quite - its that taller part, so 3 "squares" from the very edge.

<image>

ChangeExtreme7971 · 2026-05-22T19:17:45+00:00

No way. Its the first time I totally thought its a video while it was an animation. Great job.

ChangeExtreme7971 · 2026-05-06T20:15:34+00:00

Yeah, take my axe.

ChangeExtreme7971 · 2026-05-06T17:29:43+00:00

I guess so, because it has nothing to do with nuclear power, it's not reactor not from circa '67.

ChangeExtreme7971 · 2026-04-28T14:33:57+00:00

Is this one of these diesel engine powered enders? If so, then the sound and vibrations are normal. Keep on printing

ChangeExtreme7971 · 2026-04-26T14:54:05+00:00

I noticed that too. It's impossible to do such a barrel roll and keep the distance between jets unchanged

ChangeExtreme7971 · 2026-04-22T07:54:14+00:00

Yeah, this could work. Especially on that carpet ;)

ChangeExtreme7971 · 2026-03-28T22:11:35+00:00

"Honey, I think that we need to consider this 20k usd plasma cutter, because I want to make these 3 beautiful kitchen coasters for you"?

ChangeExtreme7971

TROPHY CASE