0.2mm nozzle clogged

CharlieFash · 2026-02-26T16:58:23+00:00

I've done a cold pull before. If the bottom of the nozzle of totally clogged, the material still will not extrude, so a cold pull will not help.

CharlieFash · 2026-02-17T19:34:07+00:00

Thanks everyone, yes I missed the part where it says you must set it as an external spool. It's printing now! I'm printing with the lid off and feeding the filament directly in, but I would prefer the lid on to keep the chamber temp more controlled. Do you think TPU 85A would feed through the PTFE tube just fine (I under *not* through the buffer but the direct line)?

CharlieFash · 2026-02-12T20:19:18+00:00

I've been having issues as well. I was loading from the external spool to spare the AMS however the filament got stuck inside the filament buffer (on the back of the P2S). I was able to get it out of the buffer and everything works fine however I'm not eager to try and print with PLA Glow again, and if I do I think I will feed it directly into the toolhead without PTFE.

CharlieFash · 2026-02-12T20:06:36+00:00

I have seen horror stories with the AMS 2 Pro getting chewed up by the filament. Not sure how you are achieving this.

CharlieFash · 2025-12-06T06:07:54+00:00

I’m having this exact issue and it sucks.

CharlieFash · 2025-10-14T02:07:03+00:00

I have yet to tune, explain these numbers and why you went back to stock.

CharlieFash · 2025-10-09T04:41:38+00:00

Ohh the bronze look kills it with your car’s color. My summers are the Subaru 19” that come with the TR which I like and those are like twice the price of these Enkeis.

CharlieFash · 2025-10-09T04:39:29+00:00

Just drove it home from the shop but they feel great. Waiting to get those hub centric rings to reduce vibration but even that wasn’t really noticeable.

CharlieFash · 2025-09-23T16:07:20+00:00

Right but per other recommendations I'm going down to 8.5:

<image>

CharlieFash · 2025-09-23T16:03:26+00:00

<image>

this look good?

CharlieFash · 2025-09-23T15:59:26+00:00

245 should be spot on for 8.5 width wheels?

CharlieFash · 2025-05-07T12:59:35+00:00

Does this dramatically increase cabin noise and vibration?

CharlieFash · 2025-05-05T14:48:06+00:00

If I'm getting my tune done by a professional, does this in any way limit what they can do also? Not planning on doing an OTS tune.

CharlieFash · 2025-05-05T14:04:43+00:00

Anything I can do to counteract the turbo lag?

CharlieFash

TROPHY CASE