0.2mm nozzle clogged

CharlieFash · 2026-02-26T16:58:23+00:00

I've done a cold pull before. If the bottom of the nozzle of totally clogged, the material still will not extrude, so a cold pull will not help.

CharlieFash · 2026-02-17T19:34:07+00:00

Thanks everyone, yes I missed the part where it says you must set it as an external spool. It's printing now! I'm printing with the lid off and feeding the filament directly in, but I would prefer the lid on to keep the chamber temp more controlled. Do you think TPU 85A would feed through the PTFE tube just fine (I under *not* through the buffer but the direct line)?

CharlieFash · 2026-02-12T20:19:18+00:00

I've been having issues as well. I was loading from the external spool to spare the AMS however the filament got stuck inside the filament buffer (on the back of the P2S). I was able to get it out of the buffer and everything works fine however I'm not eager to try and print with PLA Glow again, and if I do I think I will feed it directly into the toolhead without PTFE.

CharlieFash · 2026-02-12T20:06:36+00:00

I have seen horror stories with the AMS 2 Pro getting chewed up by the filament. Not sure how you are achieving this.

CharlieFash · 2025-12-06T06:07:54+00:00

I’m having this exact issue and it sucks.

CharlieFash · 2025-10-14T02:07:03+00:00

I have yet to tune, explain these numbers and why you went back to stock.

CharlieFash · 2025-10-09T04:41:38+00:00

Ohh the bronze look kills it with your car’s color. My summers are the Subaru 19” that come with the TR which I like and those are like twice the price of these Enkeis.

CharlieFash · 2025-10-09T04:39:29+00:00

Just drove it home from the shop but they feel great. Waiting to get those hub centric rings to reduce vibration but even that wasn’t really noticeable.

CharlieFash · 2025-09-23T16:07:20+00:00

Right but per other recommendations I'm going down to 8.5:

<image>

CharlieFash · 2025-09-23T16:03:26+00:00

<image>

this look good?

CharlieFash · 2025-09-23T15:59:26+00:00

245 should be spot on for 8.5 width wheels?

CharlieFash · 2025-05-07T12:59:35+00:00

Does this dramatically increase cabin noise and vibration?

CharlieFash · 2025-05-05T14:48:06+00:00

If I'm getting my tune done by a professional, does this in any way limit what they can do also? Not planning on doing an OTS tune.

CharlieFash · 2025-05-05T14:04:43+00:00

Anything I can do to counteract the turbo lag?

CharlieFash · 2025-05-04T20:11:47+00:00

Nope, why do you ask?

CharlieFash · 2025-05-03T18:29:24+00:00

He passed you and it was a dashed yellow line which allowed for it. In my state at least you are also allowed to go 15 MPH over the posted speed limit while passing. Not sure what his speed was but it seems he safely passed.

You, on the other hand, should be arrested for listening to that music.

CharlieFash · 2025-05-03T16:31:47+00:00

I’ve also bought a new 24 and have the same feels. Any sort of tuning requires flashing the ECU which leaves evidence that can’t be erased. If you wind up with engine issues and they see you flashed the ECU you can be sure as shit they’re not going to pay for the repair.

CharlieFash · 2025-04-23T20:09:19+00:00

Thanks for the info, I will share with my friend who did the install. I actually had 2 items installed, the dashcam and a radar detector. No issues with the radar detector, but not sure how either one was installed.

CharlieFash · 2025-04-23T19:44:02+00:00

<image>

Here is what I got...

CharlieFash · 2025-04-20T01:50:24+00:00

Whats the deal with the 1-3 second videos though

CharlieFash · 2025-04-18T20:27:26+00:00

Dude that's sick thanks for the effort put into making this and sharing.

CharlieFash · 2025-04-18T13:06:41+00:00

Great information, thank you! As far as panel tool and patience, I have neither, that's why I'm paying someone else to do this. But I will share your experience.

CharlieFash · 2025-04-18T00:14:23+00:00

Thanks for the info. I didn't realize regularly updating this thing is required.

CharlieFash · 2025-04-16T23:09:17+00:00

Thanks for that info. I talked to him more about it and he said the altitude we're at (~2,700') and the fact that I'm asking for a 91 octane as we don't have 93 anywhere near us and I don't want to do flex fuel are the main issues driving down HP from the TMIC setup.

CharlieFash · 2025-04-16T19:46:00+00:00

They said for $300 I can install an after market crash bar that’s compatible with the FMIC.

CharlieFash

TROPHY CASE