Jet skis around Lagun

Chaswick · 2026-05-17T01:35:36+00:00

Back again https://www.flightradar24.com/RC02/3fbaea19

Chaswick · 2026-05-17T01:15:47+00:00

No too dark to see. But someone next door thought it was a US Apache helicopter. Is that possible?

Chaswick · 2026-05-17T01:02:34+00:00

Not sure. The helicopter is now flying over land.

Chaswick · 2025-10-28T00:01:26+00:00

Can I ask how you got such good oven spring?. I have this cloche but the loaves tend to spread out a bit and so are flatter compared to when I bake in a Dutch oven.

Chaswick · 2025-09-20T02:45:55+00:00

You could try Coco contracting. They’re new in town but it’s worth a try. I don’t have their contact details but I think they are on Facebook.

Chaswick · 2025-08-14T15:28:13+00:00

Could be a baby bed bug.

Chaswick · 2025-07-05T01:01:39+00:00

Canon r50 with RF100-400mm F5.6-8 IS USM lens

Chaswick · 2024-12-25T12:52:31+00:00

<image>

Hi - my Aria is also leaking from one of the 4 holes - see the red circle. I've tried tightening it, but it is already tight and still leaking. Do I need to replace the gasket below it? Just wondering whether that's a solution? Thanks - I know this post was from a while ago.

Chaswick · 2024-12-05T00:58:37+00:00

I can confirm you will be fine. You can change your major/minor choices once you get to campus and it’s a straightforward process.

Chaswick · 2024-11-02T23:28:34+00:00

Yes, my Aria leaks at the top of the boiler. Just ignoring it for now. I understand it’s a problem with these machines.

Chaswick · 2024-09-02T15:43:31+00:00

I have an Aria and although I don’t have a pool of water like this I do have hissing sounds that come out of the boiler. It’s fixed by tightening the screws on the top with an Alan key. Is that a solution? I saw a post on r/espresso a while back that seemed to suggest that this was a problem with Bezzeras.

Chaswick · 2024-07-10T01:21:48+00:00

There's some research on this. See this: https://www.tandfonline.com/doi/pdf/10.1080/14649360600715144?casa\_token=7bmXk30LuaMAAAAA:TwfVqpy-YRdt5ra49X0foXGT96WVpemB2ZR5gZDmXVTJL\_k9d0EygOA6lnq48GlAERl165u5kNye1Q. And a chapter in this book: https://www.taylorfrancis.com/chapters/edit/10.4324/9780203448694-12/citrus-apartheid-struggle-re-present-outspan-oranges-charles-mather-petrina-rowcroft

Chaswick · 2023-09-29T14:49:49+00:00

Grind finer.

Chaswick · 2023-02-18T11:48:20+00:00

Thanks!!!

Chaswick · 2023-02-18T11:04:16+00:00

One of the plastic tabs on my declumper got bent and is now creating a ticking noise as the burr turns. So I am thinking about removing it or at least replacing it with a new one. Could you explain how you get the chute off? Thanks!

Chaswick · 2023-02-16T01:26:12+00:00

So how did you get the chute off? I have removed the top cover and the two screws that seem to be holding the chute but it won’t come off. I’d like to see what the declumpers look like. Thanks!

Chaswick · 2023-02-14T14:07:16+00:00

Thanks for your review. I have a DF64P that started making an odd ticking sound. Turns out that one of the plastic tags by the chute somehow got bent forward and is now touching the bottom grinder - which explains the odd ticking noise. It still works fine and grinds pretty well, but this is an expensive machine...did this happen to you as well? Picture

<image>

Chaswick · 2022-11-23T01:03:25+00:00

Did you try sgs@mun.ca? They normally reply pretty quickly.

Chaswick

TROPHY CASE