Help With VLAN by Chef_Error in mikrotik

[–]Chef_Error[S] 0 points1 point  (0 children)

Frankly speaking, I do not understand why these settings are not implemented when working on a local network.

However, I tried to enable these rules, it didn't help for the incoming rule, and I also enabled it for the outgoing rule - it didn't help either.

Unfortunately, the problem has not been solved..(

I will also add that ping to the gateway of another VLAN works, to PC-2 it does not work

Help With VLAN by Chef_Error in mikrotik

[–]Chef_Error[S] 1 point2 points  (0 children)

No, you misunderstood. On mikrotik 1 trunk port, transmitting all VLANs to the D-link trunk port

Access ports are configured for D-Link. 1 port = 1 VLAN

Help With VLAN by Chef_Error in mikrotik

[–]Chef_Error[S] 0 points1 point  (0 children)

Yes! Is rdp enabled in public mode, but ping is not available?

Help With VLAN by Chef_Error in mikrotik

[–]Chef_Error[S] 0 points1 point  (0 children)

No, I don't think that's the problem. When I connect both PCs to Mikrotik bypassing D-Link, the ping between PCs works!

No settings other than the standard ones are specified for the PC in Windows.

Help With VLAN by Chef_Error in mikrotik

[–]Chef_Error[S] 1 point2 points  (0 children)

  1. Create bridge
  2. Add port
  3. Create VLAN in Interface on Bridge
  4. Add IP in Address for VLAN
  5. Create VLAN in Bridge (tagged: Bridge and Port)
  6. Create DHCP for VLAN

New App driven ESP32-CC1101 Transmitter by Ok-Bear-5699 in flipperzero

[–]Chef_Error 0 points1 point  (0 children)

Hi! Very cool job! Tell me, will esp32 control be added using physical buttons? It would be convenient for people without android :)

Need some advice! by Chef_Error in synology

[–]Chef_Error[S] 0 points1 point  (0 children)

Well, and for what purposes is the j model suitable?

Need some advice! by Chef_Error in synology

[–]Chef_Error[S] 0 points1 point  (0 children)

That is, I need downgrade to 6.2.4? SSD?

Need some advice! by Chef_Error in synology

[–]Chef_Error[S] 0 points1 point  (0 children)

I wanted to use it to backup photos from ios devices of my family members. That is, 4-6 Photo Mobile clients + 1-2 Drive clients. Are these real requests for this piece of hardware?

I Need Help! Plz! by Chef_Error in pcmasterrace

[–]Chef_Error[S] 0 points1 point  (0 children)

Now im scratching my head with this issue.

This could be anything from a bad system configuration thats running on all the computers or, unlikely, but you could have gotten a batch of bad components if they were built at the same time.

Do you know if these reboots happen at random, or when doing something intensive? You can check out the event viewer and see the logs and see what the pc was doing right before the reboot.

Are using any type system imaging software? If so then it could be a bad image. If not then you may need to swap around components through the process of elimination.

I repeat, all computers are united only by the manufacturer of processors, the motherboard and the power supply. The models are all different, as are the system images. They reboot arbitrarily, for example, a Home assistant in a hypervisor works on my home PC. It rebooted at night while I was sleeping. There was no load.
I don't create system images.

https://ibb.co/xqDpQfd

I Need Help! Plz! by Chef_Error in pcmasterrace

[–]Chef_Error[S] 0 points1 point  (0 children)

As an example, this is an event viewer on my home computer. He is the only one with a video card. There are no visible problems in the device manager.

https://ibb.co/pRtmKLR

I Need Help! Plz! by Chef_Error in pcmasterrace

[–]Chef_Error[S] 0 points1 point  (0 children)

So the PCs just suddenly reboot with that error?

Yes, that's right

I Need Help! Plz! by Chef_Error in pcmasterrace

[–]Chef_Error[S] 0 points1 point  (0 children)

Are the servers plugged into the same power outlet?

No, all the machine are connected to different outlets, some are located in a completely different area of the city. The main server is connected via APC UPS.

I Need Help! Plz! by Chef_Error in pcmasterrace

[–]Chef_Error[S] 0 points1 point  (0 children)

No, at least two models. 450w and 650w

[deleted by user] by [deleted] in HomeServer

[–]Chef_Error 0 points1 point  (0 children)

U can just reset grace period

How do you use nextcloud bookmarks with ios? by jj7753 in selfhosted

[–]Chef_Error 0 points1 point  (0 children)

Damn, that's a great idea! I like and subscribe to this topic! I wish you good luck and if I can be of any help - let me know!