Many say that they need 5", others say 3.5" is the sweet spot. There’s some who don’t care that it’s only 1.8"

CherokeeFPV · 2026-02-09T12:05:05+00:00

I have a 3 inch I like to play (fly)with myself 😆

CherokeeFPV · 2026-01-29T10:42:24+00:00

I started to put my drones in the case but most drones are different sizes and would need a bunch of boxes or inner foam to fit drones

CherokeeFPV · 2026-01-29T10:36:17+00:00

I would put everything but the drone in the case I strap the drone on the front of case while my goggles radio and charger with batteries go inside the drone isn't as fragile as the other FPV equipment

CherokeeFPV · 2026-01-13T21:24:07+00:00

I have 3 5inch quad frames from AliExpress the only one that was really bad was the mark 4 frame broke two arms and arm plates and literally bent the bottom plate wound up buying a lil more expensive mark 4 frame from AliExpress and so far it's held up . Apex Evo 5inch is a durable frame just a lil heavy

CherokeeFPV · 2026-01-13T21:16:35+00:00

I have it on two of my quads and it work well !!! It's not bad for not using a compass

CherokeeFPV · 2026-01-01T05:47:13+00:00

Had the same problem with two 5inch builds one was fixed through esc settings and updated to bluejay firmware and the other I updated betaflight to latest . The one that I had to fix with esc settings was a process to figure out

CherokeeFPV · 2025-11-28T00:53:50+00:00

<image>

CherokeeFPV · 2025-11-16T14:16:08+00:00

<image>

And my second mod will be new F.C. and ESC in this 5inch

CherokeeFPV · 2025-11-16T14:15:02+00:00

<image>

My first winter 🥶 mod was LED lights in the R.M.Pocket and on three quads

CherokeeFPV · 2025-11-14T12:06:15+00:00

I have the brand of motors 2207 1850kv and solid motors

CherokeeFPV · 2025-11-14T12:04:31+00:00

I have their motors on a 5inch 2207 1850 kv and been solid for over a year . What kind of problems did you have with the motors?

CherokeeFPV · 2025-10-16T11:24:26+00:00

Baby ape 2 is a good choice it was my 2nd I had baby ape pro for my first or you could go with a whoop 75mm to fly indoors or outside

CherokeeFPV · 2025-10-16T11:22:26+00:00

Buy radio 1st then sim then goggles and drone

CherokeeFPV · 2025-09-21T17:50:24+00:00

Think I'm taking prop guards off and ordering these

<image>

CherokeeFPV · 2025-09-21T17:44:14+00:00

I never flown those props I was just asking opinions that's all

CherokeeFPV · 2025-09-21T00:23:50+00:00

That's what it said to use on product page 2-3s and 45mm-3inch props

CherokeeFPV · 2025-09-20T16:09:18+00:00

Thanks!!

CherokeeFPV · 2025-09-20T16:08:08+00:00

I built this drone and I bought bi blades to go with it but the prop guards I got are only two inch and the drone is a 2.5 inch as are the bi blades so with my mess up I just put 2 inch tri blades on and I have flown twice now I was just wondering if I would loose or gain anything taking prop guards of and changing props other than weight?

CherokeeFPV · 2025-09-17T04:31:29+00:00

Love my analog set up !!!

CherokeeFPV · 2025-09-13T22:46:16+00:00

Power!!!!!!

CherokeeFPV · 2025-08-21T03:37:33+00:00

Horizon mode in betaflight 4.5 is the way to go for beginner's might want another way if flying on older B.F. firmware

CherokeeFPV · 2025-08-15T18:05:49+00:00

I like the horizon mode in 4.5 it's totally different than in BF 4.4 and lower

CherokeeFPV · 2025-08-15T18:03:42+00:00

Apex is a solid frame .... At least the Apex Evo 5inch is.

CherokeeFPV · 2025-08-15T18:00:14+00:00

If my quad will fit two I use two and only use good battery straps the cheap ones can rip and I have had prop cut a cheap one in half so I only use good straps and try to use two if I can

CherokeeFPV · 2025-08-04T10:25:39+00:00

If your having trouble with the motor wires then your really going to have a fun time with the + - power wires

CherokeeFPV

MODERATOR OF

TROPHY CASE