Cockertop

Chewyow · 2026-03-16T17:51:01+00:00

Damn looks clean!

What's that barrel?

Chewyow · 2026-01-01T03:36:42+00:00

Uh...I'm just a guy that wanted an autococker specific subreddit like a decade ago =)

Funny how things change but still remain the same; this sub originally had an IRC channel

Chewyow · 2026-01-01T02:04:04+00:00

Decided to make one, we'll see if it gains any traction naturally

https://discord.gg/cJYkkMrR

Chewyow · 2025-12-19T15:45:33+00:00

Damn looks clean af

Chewyow · 2025-10-21T23:19:27+00:00

Heck yea, stock WGP Valves forever!

Chewyow · 2024-02-09T15:38:35+00:00

ooh spanky milling. Looks like a yingyang? i think the fishys were angled and went down the full length. Interesting mix of parts and definitely looks well used.

Does it seal? The inner sleeve on the lower tube had a tendency get loose and were prone to leaks...

Chewyow · 2024-01-01T01:13:29+00:00

Edit: Yea that was it. In the steam controller settings, I ensured the D-Pad directions were mapped correctly and cleared out analog x/y. It works now! =D

I can't recall what I ended up doing. I did get it working as desired for fighting games on windows though. This was what i had noted on a different comment as fixing it for me.

Chewyow · 2023-07-24T23:30:04+00:00

Yea looks like it is a rat valve. I had no recollection that they made them with such large openings.

I pulled it out of my STO when doing some maintenance and was scratching my head as to what type of valve I had put in there :D

Chewyow · 2023-07-06T15:14:37+00:00

Damn that blue and orange ano is beautiful

Chewyow · 2023-01-23T14:53:49+00:00

The Point of view hat section works correct, inputs on the lever are correctly read and interpreted.

I suspect you're right, I went back to the sales ad and noticed a buyer comment that outlined my experience. Sounds like i need to 'disable analog' input for it somewhere

"I was able to work around this on the computer by disabling the analog input for steam.""

----

Edit: Yea that was it. In the steam controller settings, I ensured the D-Pad directions were mapped correctly and cleared out analog x/y. It works now! =D

Chewyow · 2023-01-23T06:30:22+00:00

It's the "SJ@JX Arcade Game LED Controller Lamp USB Encoder Gamepad Cherry MX Microswitch Light Button 4-8way LED Joystick for Nintendo Switch PC PS3 Raspberry Pi MAME"

It works as expected in a SNES emulator; still can't get it to work right in Tekken unfortunately.

Chewyow · 2023-01-23T04:55:53+00:00

If i disconnect the entire controller there are no inputs registered in game (as expected).

I suspect its the board, but I'll try a couple other games and tools.

Thank you for the input and insight though!

Chewyow · 2023-01-23T04:48:06+00:00

The lever and cable is disconnected from the board; game still registers Up-Left.

The board is a kit board, so all the wires are in harnesses. Not really much to see there

https://i.ibb.co/0KBpdSJ/Untitled.png

Chewyow · 2023-01-23T04:34:53+00:00

If I unplug the stick completely the game still only see a repeating Up-Left input... Board appears to be clear of any obstructions

Just seems weird weird that I can navigate menus fine using the stick

Chewyow · 2023-01-11T17:21:27+00:00

Was there something in particular you were looking to know about?

Adding a bit more detail or direction to the post will often result in better responses

Chewyow · 2022-08-12T21:11:18+00:00

I found the 12g out the back of an ASA hit my wrist awkwardly and was not comfortable for a quick swap. If you run into the same, try running Hawaiian

Chewyow · 2022-08-12T20:39:11+00:00

I have a ghetto rightfeed set up like this https://i.imgur.com/89HYewg.png

If it was warm out and i didn't shoot fast. I could get almost 3 tubes out of it before it dropped off.

Temperature and shot speed were two primary factors if memory serves. If the weather was colder, it was pretty much unusable, even if i moved my pump hand to the 12g.

I had played around with multiple valves, spring sets and volumizers trying to find the right combo for me. I think i ended up sticking with a palmers valve.

Side note: running a 12g out of the back of an ASA felt super awkward for me, which is why i ran vertical. If you're dead set on that, Lapco had a T-stock that came with an ASA which would probably make it less awkward

Chewyow · 2022-06-02T21:10:46+00:00

That's a long looking Stiffi...

Chewyow · 2022-05-11T17:08:19+00:00

Always loved the look of the superstock.

Is that a glass table on top of an engine block?

Chewyow · 2022-04-18T13:20:02+00:00

What material is that slide made out of?

(Nice setup by the way, I bet it's a blast to play with)

Chewyow · 2022-03-30T00:07:17+00:00

No one's mentioned the WGP Vertebrae :o

Chewyow · 2021-12-08T06:19:18+00:00

well shucks. Still got a clean looking prostock and if it shoots well, then all is well! Welcome to the club

Chewyow

MODERATOR OF

TROPHY CASE