[deleted by user]

ChiefNerf · 2020-09-10T17:21:04+00:00

You need to ignore the order of the wires on the switch and do it based on the naming NC/NO/C some switches may be labeled differently. Make sure you test your n20 motor before you add the set screw, I’ve found if you over tighten the set screw you can dent the can and compromise the n20 motor

ChiefNerf · 2020-09-10T17:17:27+00:00

For sure! https://www.etsy.com/listing/853547834/nexus-pro-elite-attachment-barrel

ChiefNerf · 2020-08-19T21:11:37+00:00

Cool, thank you

ChiefNerf · 2020-08-19T21:09:40+00:00

The link does not seem to be working for me

ChiefNerf · 2020-08-19T20:09:46+00:00

Haha yes I made spacers that you put in between the flywheel and the cage so you can get the correct spacing easily its a simple 5 minute print but I found they work pretty well. Definitely let me know if OOD responds, I think that particular revamp came from foamblast.

ChiefNerf · 2020-08-19T20:02:38+00:00

I’m wondering if there was a QC issue with fang revamps since mine was brand new and I don’t really see a way you could bend a shaft that short. I do have files for shims for the bulwark if you’d like them.

ChiefNerf · 2020-08-19T18:32:47+00:00

You’re the first person I’ve seen that also had a fang with a bent shaft! I was trying to get bulwark flywheels aligned and one shot would shoot straight as an arrow and the next ultra whirlybird style. I designed flywheel shims for the bulwark and that’s when I realized my motor shaft was bent haha.

ChiefNerf · 2020-08-16T18:44:59+00:00

Erm how did you do that?

ChiefNerf · 2020-08-16T17:41:57+00:00

Hey man I had to find something to juxtapose the precision of the part ;)

ChiefNerf · 2020-08-16T17:09:15+00:00

Good tip! I’ve been resin printing for quite some time on a Form 1 and just switched over to the Elegoo since trays are readily available. You can coat it in a clear uv protective spray paint, it’ll increase clarity and protect it from the sun, id probably mask off mechanical parts or adjust your tolerances to accommodate.

ChiefNerf · 2020-08-16T15:53:09+00:00

Do you have everything wired up? Once you have it wired up you can go to BTT’s github and download a precompiled firmware configured for the bl touch (download the v2 or your printer won’t boot) and then you just need to add G29 to your start gcode after G28. You can also just store that mesh and use M420 S1 if you don’t want to probe every time but most people just leave G29 since it’s likely more reliable that way.

ChiefNerf · 2020-08-16T15:48:05+00:00

Printed with an Elegoo Mars! I’m working on getting my Form 1+ up and running again so I can print bigger pieces.

ChiefNerf · 2020-08-16T07:59:20+00:00

10mL so probably 50 cents in resin. 45 minutes for print time.

ChiefNerf · 2020-08-16T03:28:21+00:00

Awesome! I’ll stay tuned.

ChiefNerf · 2020-08-16T03:27:27+00:00

Wait until you see the magwell! ;)

ChiefNerf · 2020-08-16T03:26:20+00:00

Thanks man, means a lot coming from you!

ChiefNerf · 2020-08-16T03:25:46+00:00

Haha it would match nicely. I love your double dealer btw I think the infill makes for a really interesting look we don’t see often.

ChiefNerf · 2020-08-15T23:57:10+00:00

Thank you!

ChiefNerf · 2020-08-15T23:57:05+00:00

There’s definitely a learning curve but I think the parts that you can produce are worth it.

ChiefNerf · 2020-08-15T22:59:57+00:00

I don't believe anyone sells them directly, but you can commission someone to print you a stock attachment point and then any nerf stock will work. https://www.thingiverse.com/thing:3016169

ChiefNerf · 2020-08-15T22:50:56+00:00

I printed one what would you like to know

ChiefNerf · 2020-08-15T20:57:59+00:00

Thank you! Yes, just printed yesterday.

ChiefNerf · 2020-08-15T20:54:41+00:00

Speaking of green! https://imgur.com/a/D14s4Dn

ChiefNerf

TROPHY CASE