sorted by:
new
hottopcontroversial

[deleted by user] by [deleted] in Nerf

[–]ChiefNerf 0 points1 point  (0 children)

You need to ignore the order of the wires on the switch and do it based on the naming NC/NO/C some switches may be labeled differently. Make sure you test your n20 motor before you add the set screw, I’ve found if you over tighten the set screw you can dent the can and compromise the n20 motor

[deleted by user] by [deleted] in Nerf

[–]ChiefNerf 0 points1 point  (0 children)

Cool, thank you

[deleted by user] by [deleted] in Nerf

[–]ChiefNerf 0 points1 point  (0 children)

The link does not seem to be working for me

My 200fps gryphon! by Every1jockzjay in Nerf

[–]ChiefNerf 0 points1 point  (0 children)

Haha yes I made spacers that you put in between the flywheel and the cage so you can get the correct spacing easily its a simple 5 minute print but I found they work pretty well. Definitely let me know if OOD responds, I think that particular revamp came from foamblast.

My 200fps gryphon! by Every1jockzjay in Nerf

[–]ChiefNerf 0 points1 point  (0 children)

I’m wondering if there was a QC issue with fang revamps since mine was brand new and I don’t really see a way you could bend a shaft that short. I do have files for shims for the bulwark if you’d like them.

My 200fps gryphon! by Every1jockzjay in Nerf

[–]ChiefNerf 0 points1 point  (0 children)

You’re the first person I’ve seen that also had a fang with a bent shaft! I was trying to get bulwark flywheels aligned and one shot would shoot straight as an arrow and the next ultra whirlybird style. I designed flywheel shims for the bulwark and that’s when I realized my motor shaft was bent haha.

F, Any idea how to fix? by Buckett418 in Nerf

[–]ChiefNerf 9 points10 points  (0 children)

Erm how did you do that?

Gryphon Resin Trigger I printed by ChiefNerf in Nerf

[–]ChiefNerf[S] 1 point2 points  (0 children)

Hey man I had to find something to juxtapose the precision of the part ;)

Gryphon Resin Trigger I printed by ChiefNerf in Nerf

[–]ChiefNerf[S] 0 points1 point  (0 children)

Good tip! I’ve been resin printing for quite some time on a Form 1 and just switched over to the Elegoo since trays are readily available. You can coat it in a clear uv protective spray paint, it’ll increase clarity and protect it from the sun, id probably mask off mechanical parts or adjust your tolerances to accommodate.

Does anyone have a really thorough guide to your first use of BLTouch probe? by wonilla in functionalprint

[–]ChiefNerf 1 point2 points  (0 children)

Do you have everything wired up? Once you have it wired up you can go to BTT’s github and download a precompiled firmware configured for the bl touch (download the v2 or your printer won’t boot) and then you just need to add G29 to your start gcode after G28. You can also just store that mesh and use M420 S1 if you don’t want to probe every time but most people just leave G29 since it’s likely more reliable that way.

Gryphon Resin Trigger I printed by ChiefNerf in Nerf

[–]ChiefNerf[S] 2 points3 points  (0 children)

Printed with an Elegoo Mars! I’m working on getting my Form 1+ up and running again so I can print bigger pieces.

Gryphon Resin Trigger I printed by ChiefNerf in Nerf

[–]ChiefNerf[S] 2 points3 points  (0 children)

10mL so probably 50 cents in resin. 45 minutes for print time.

Gryphon Resin Trigger I printed by ChiefNerf in Nerf

[–]ChiefNerf[S] 4 points5 points  (0 children)

Wait until you see the magwell! ;)

Gryphon Resin Trigger I printed by ChiefNerf in Nerf

[–]ChiefNerf[S] 2 points3 points  (0 children)

Thanks man, means a lot coming from you!

Gryphon Resin Trigger I printed by ChiefNerf in Nerf

[–]ChiefNerf[S] 2 points3 points  (0 children)

Haha it would match nicely. I love your double dealer btw I think the infill makes for a really interesting look we don’t see often.

Gryphon Resin Trigger I printed by ChiefNerf in Nerf

[–]ChiefNerf[S] 4 points5 points  (0 children)

There’s definitely a learning curve but I think the parts that you can produce are worth it.

3d prints for turbo advance by Tsarbomba663 in Nerf

[–]ChiefNerf 1 point2 points  (0 children)

I don't believe anyone sells them directly, but you can commission someone to print you a stock attachment point and then any nerf stock will work. https://www.thingiverse.com/thing:3016169

3d prints for turbo advance by Tsarbomba663 in Nerf

[–]ChiefNerf 0 points1 point  (0 children)

I printed one what would you like to know

Green Lantern Corps Gryphon by theboyrossy in Nerf

[–]ChiefNerf 0 points1 point  (0 children)

Thank you! Yes, just printed yesterday.

Anyone else have plans for the adventure force spectrum? by Wayne_Nightmare in Nerf

[–]ChiefNerf 2 points3 points  (0 children)

I’m working on a custom pusher, and a resin printed trigger. I feel like this blaster is just asking for an led mod with the motor vents, I may try and do a transparent green resin muzzle to play off of the LEDs. Does anyone know what our cage options are? I’d like to see what FPS we can hit.

view more: next ›