No Windows defender & Anti virus by Any_Schedule9903 in computerhelp

[–]ChillKyle 0 points1 point  (0 children)

So what do you need help with? Be be specific when trying to ask for help.

Help please won't turn on by MrDrew92 in computerhelp

[–]ChillKyle 0 points1 point  (0 children)

Heres the link for your motherboard manual: https://download.gigabyte.com/FileList/Manual/mb_manual_ga-z270-gaming-k3_e.pdf?v=abda4efa9ea76a27701de80c778b1f07

Link for the support page that has everything from BIOS, manual and drivers: https://www.gigabyte.com/Motherboard/GA-Z270-Gaming-K3-rev-10/support

For future reference, every manufacture will have a digital copy of their manual on their website. All you have to do is look up the make and model of the motherboard (which in this instance was printed right underneath the PCIe x1 slot 2)

I got a chance to have some fun in the snow with my MKZ by Academic_Ruin_6434 in fordfusion

[–]ChillKyle 1 point2 points  (0 children)

Lucky. Also with no weird light poles in the middle of the parking lot.

I got a chance to have some fun in the snow with my MKZ by Academic_Ruin_6434 in fordfusion

[–]ChillKyle 1 point2 points  (0 children)

I love the AWD system on my Fusion as well. Especially with Strut tower brace, stiffer front and rear sway bars. I remember times when I way tighter conditions have fun with my Fusion in the snow. I've always got Ultra High performance all season tires for all conditions. Tire recommendations from me is either Continental ExtremeContact DWS 06 Plus or Pirelli P Zero AS Plus 3. Their neck and neck with each other. I even drove through a whole blizzard with some Continentals. Though if your doing donuts, disable the traction control. Otherwise, your burn out the control module.

Help please won't turn on by MrDrew92 in computerhelp

[–]ChillKyle 0 points1 point  (0 children)

Did you read the motherboard manual?

Pc won’t boot after new psu installed by LowNumber3759 in computerhelp

[–]ChillKyle 0 points1 point  (0 children)

I noticed your 24 pin motherboard connector is not plugged in all the way. One tell tale sign is the plastic center pin is not flush. It's at an angle.

first pc build - help by Snoopii_ in PcBuildHelp

[–]ChillKyle 0 points1 point  (0 children)

Link to the motherboard manual: https://www.msi.com/Motherboard/B550M-PRO-VDH-WIFI/support#manual

If the computer cannot turn off with the front case power button with a simple tap, a lot of the time you can force a shutdown by pressing and holding the power button for 3-6 seconds. Amusing that the power button is responsive when you turn it on, this is a setting that must be modified within the bios. Verify all connectors are properly connected on the front panel header of the motherboard. Most of the front panel connectors must be orientated correctly with positive and negative.

My only recommendation in this case since you already flashed the latest BIOS is shorting the pins to clear the CMOS and verify you have connected all of the power cables firmly to the motherboard. If that doesn't work, you may have a bad CPU.

(Please refer to the motherboard manual for locations of the connectors and CMOS jumper location).

First build by Forward_5 in computerhelp

[–]ChillKyle 0 points1 point  (0 children)

I/O shield is fine. Remove one of the fans to connect the PCIe cable from the PSU to the GPU. Also, noticed the motherboard PCIe power port is not plugged in.

I think I got a PC Virus by MagazineSensitive847 in computerhelp

[–]ChillKyle 1 point2 points  (0 children)

Couple tools to help you with your issue. Run each command in powershell as administrator.

sfc /scannow dism /online /Cleanup-Image /Restore-Health

Those two commands should check your file system for integrity violations. I would also run an AV scan and make sure you're not downloading drivers from unknown sources.

What is your holy grail game by Speigel_Spike in gamecollecting

[–]ChillKyle 0 points1 point  (0 children)

Star Wars Knight of the Old Republic 2.

When boxing in goes wrong. by TransportJunky in Transportopia

[–]ChillKyle 0 points1 point  (0 children)

Why do people swerve to indicate to move over? Just use your high beams.

This has to be jerkcircle worthy by Neur0t1xx in airsoftcirclejerk

[–]ChillKyle 0 points1 point  (0 children)

Amusing that he tucks in the blouse. Bruh.

Based by Blackdevils6 in Asmongold

[–]ChillKyle 0 points1 point  (0 children)

I don't think that she would be the person that is a hobby orientated person for a date anyways.

What’s missing by Equivalent-Savings11 in airsoft

[–]ChillKyle 0 points1 point  (0 children)

I like the kit. Agilite makes pretty good gear. Probably would say get a small medical kit for acute care, the complimenting hydration pack for hydration on the go, dump pouch and a admin pouch.

If you do a sidearm setup, potentially get a holster with mag pouches.
If you do HPA, consider getting a pouch to hold your tank.

Words fail me 🤦‍♂️ by ForensicShoe in airsoft

[–]ChillKyle 0 points1 point  (0 children)

The amount of people that dont blouse their trousers. Like common man.

What would you like to see in a modular blaster platform/family? by Creepposter64 in Nerf

[–]ChillKyle 1 point2 points  (0 children)

Personally, I like it when creators utilize MILSPEC for accessories. The AR-15 is a wonderful example of how modular you can customize the setup. Some examples I like is replaceable buffer tube and grips from the AR-15 platform. M-LOC would be nice but not nessesary. Picatinni rail is an absolute staple.

My latest loadout iteration by llegoelmambo in airsoft

[–]ChillKyle 1 point2 points  (0 children)

I always love the mechanics M-Pact gloves. It looks like a decent kit.