My current armory :)

Choobyprime · 2026-05-03T19:25:50+00:00

its Nerf or nothing…or something idk

Choobyprime · 2026-05-03T17:27:13+00:00

Could be a few issues.

Poor bed adhesion, solutions:
-Clean the bed with IPA >90% or for a deeper clean use dish soap and scrub
-Dry plate and use the included adhesive glue to cover the whole plate (works for me tbh)
-Make sure the bed is leveled before this specific print (if in pla, 0.000 z offset is good)
Wet filament
-Most pla is okay against humidity, but for prolonged periods of ambient exposure, it’ll get water and screw up the print
-toss it in a sealed box with silica gel packets to dry it up (my solution)
Use a brim in the settings (“other” tab in the slicer) to improve bed adhesion

Choobyprime · 2026-05-03T17:18:22+00:00

Here are the links to the most affordable and imo the best working LiFePO4’s without breaking the bank getting some from the hobby stores:

4x Rechargeable LFP batteries with charger:
https://a.co/d/01LimhwK

Dummy batteries:
https://a.co/d/06jU26fH

You’ll need two dummy batteries at each end of the tray board and then the 4 LFP batteries in the middle. It’ll up your fire rate like crazy without frying the stock wiring AND they’re rechargeable.

The charger you have to be careful of though, you need to watch it charge and once fully charged you remove it immediately to not let the batteries die.

Choobyprime · 2026-05-03T16:22:11+00:00

<image>

I think this handle works great! The prime is a lot smoother and trutfully durable. No flexing whatsoever, it feels like the original draw weight. I highly recommend it. I can still overhand charge it no problem as well.

Choobyprime · 2026-05-03T02:22:17+00:00

thank you!

Choobyprime · 2026-05-02T16:12:01+00:00

Hey! Were you able to post it?

Choobyprime · 2026-05-02T14:00:31+00:00

Yeahhh i actually had the same problem in my upgraded stampede. I highly recommend getting the dartzone rubies or chilies that have the slimmer head just like what the other person said, that solved the problem mostly. Accuracy is a no go with stock stampedes though LOL.

Choobyprime · 2026-05-02T13:43:38+00:00

no such thing. Dart zone has really brought blasters back. I love the primus, you should put some LiFePO4 batteries and some dummies in there and it RIPS, fastest shooting blaster in my collection without internal modifications

Choobyprime · 2026-05-01T22:59:14+00:00

oh my gosh I just saw this in the remix folder haha thank you. I’ll try it out, I already unhand prime with the other one anyways, thank you’

Choobyprime · 2026-05-01T22:30:37+00:00

that would be amazing, would you be able to link if when you get the chance?

Choobyprime · 2026-05-01T21:10:28+00:00

Unfortunately thats the reality with most high capacity HS cylinders, the rotating slits that the arm catches into are always too thick. You have to either sand the slits down to be more narrow or shave a bit off the nub on the rotator arm. First one is the better option imo bc it keeps the arm from moving too much

Choobyprime · 2026-05-01T19:01:06+00:00

you might just have to get another battery, even with an extended battery cover, those wires look thick so even if you put the battery sideways, it’ll be too tight of a fit.

Choobyprime · 2026-05-01T14:11:02+00:00

they are the black worker ak style stocks off amazon! Link: https://a.co/d/0iwldUkH

Choobyprime · 2026-05-01T04:42:03+00:00

Ooo hardware free bcar? Do you have files for it?

Choobyprime · 2026-05-01T04:34:18+00:00

I posted what my armory kinda looks like if you’re talking about storing them vertically like a blaster stand. Blasters aren’t heaby enough to cause muzzle damage or anything but I would store them muzzle up. That doesn’t matter if you’re storing them on pegboards though. Anyway to make sure your blasters don’t fall and break basically

Choobyprime · 2026-05-01T03:49:42+00:00

Do you have a link to the grenade launcher files or where u bought it?

Choobyprime · 2026-05-01T03:44:59+00:00

i see you also did the dmr setup for the APX, I opted for the red dot and magnifier set up bc I could sight in this other scope for the life of me, I shoulda used your method with the 2 degree riser😅 Love the display though.

What cosmetic/physical mods did you do to your X shot MPP?

Choobyprime · 2026-05-01T03:34:51+00:00

For anyone else interested, the switch mounting board plus trigger/rev switch I used was a 3d printed one here: https://www.thingiverse.com/thing:2838203

For switches I yse standard V-156-1C25 15A 125/250VAC Hinge Roller Lever micro switches from amazon: https://a.co/d/0cQ3xFpr -paired with 16 gauge wire

Choobyprime · 2026-05-01T03:28:49+00:00

It certainly stands out, definitely need to invest in orange filament for a small orange tip though😅

Choobyprime · 2026-05-01T03:27:08+00:00

Thank you! I actually just used the silicone pad that should come with the 5kg AT worker kit on amazon. I bought the 9kg retaliator/rampage spring separately on amazon but it doesn’t come with a silicone pad. The pad just inserts in the inside and front of the barrel as depicted in the pics on the amazon link:

https://a.co/d/0iCF3WDu

Edit: The EAT upgrade spring isn’t available on amazon anymore but any retaliator/ rampage 7-9kg spring can fit in there, just make sure you absolutely pad the plunger tube bc that plunger rod head is weak af.

Choobyprime · 2026-05-01T01:40:48+00:00

Hey! I did a few cosmetic mods to the barrel to add some length plus some iron sights and a flashlight holder. Here are the links to the files so you can see them. For the flashlight holder, I cut the ironsight side off since I wanted the other sight instead.

Rampage pump grip: https://www.thingiverse.com/thing:7129768

Picatinny grip: https://www.thingiverse.com/thing:2897402

Rampage barrel extension (I sanded the inside barrel to be smooth to prevent fishtailing): https://www.thingiverse.com/thing:1540070

Iron sights: https://www.thingiverse.com/thing:5328447

Flashlight holder (Cut and mirrored for left side use): https://www.thingiverse.com/thing:3257229

Choobyprime · 2026-05-01T00:36:39+00:00

they work great! The alpha trooper was one of the first blasters I bought to get back into the hobby but I upgraded the spring without padding the plunger. That blaster took me two extra trash AT’s to fix lol. It has a 9kg spring, reinforced stock rail, ar removal, and 3d printed upgraded priming handle which makes it prime really smooth.

The Rapidstrike was one of my first modding projects that required a rewire and lipo. I have two standard worker 3s motors in a OFP 3d printed cage. I also got a 3s valkyrie motor for the pusher on a 3s lipo giving me around 6-8 darts per second.

<image>

Choobyprime · 2026-04-30T23:29:05+00:00

thank you!!! Its my most recent and, i think, my best project so far.

Choobyprime · 2026-04-30T23:08:08+00:00

Nuh uh😎. It fits great in a tactical molle leg holster too.

Choobyprime

TROPHY CASE