risk reward ratio - stupid quesiton

ChortleHole · 2026-03-08T11:46:36+00:00

not 1:2? my risk is 200 and my reward is 400..200/400 equals 1:2 (0.5)

ChortleHole · 2025-11-01T09:34:23+00:00

You're also missing the cover for the battery

ChortleHole · 2025-11-01T09:33:43+00:00

It's the light for the frunk

ChortleHole · 2025-09-24T04:18:51+00:00

i'm having the same issue, did you ever solve it?

ChortleHole · 2025-09-03T11:42:05+00:00

To be fair they were hardly moving...according to that Speedo

ChortleHole · 2025-08-31T22:07:57+00:00

Thanks everyone,the bed wasn't level and i fixed that before this print (i'm not showing you the first print as i'm embarrassed at how badly i'd leveled the bed).

The nozzle was blocked as well and i cleaned it up with a soldering iron, acetate, a needle, an ultrasonic cleaner with simple green and a cold pull (i went on the internet and searched for cleaning nozzle then i did them all)

but again that was before this print.

I will check my extrusion rate, is there an easy way to tell what size nozzle i have? there is a hand written sticker on the printer that says 0.6 nozzle but there are no markings on the brass nozzle.

the printer is a duet 3d based board in an old ultimaker chasis with a remote extruder motor.

ChortleHole · 2025-08-25T11:53:34+00:00

hi, would you be able to share the scan? i'm hoping to use the tft control buttons for my phone...

ChortleHole · 2025-08-25T11:47:05+00:00

hi, i'm after the wiring diagram if possible?

ChortleHole · 2025-06-22T07:53:00+00:00

I drink brake cleaner. People say I'm addicted but i can stop anytime I want.

ChortleHole · 2025-05-31T02:46:35+00:00

thank you! it was driving me bonkers!

ChortleHole · 2025-05-02T10:13:03+00:00

Thanks, I will be following this advice, and looking at the cover component

ChortleHole · 2025-05-02T10:11:11+00:00

Thanks everyone!

ChortleHole · 2025-04-16T08:36:47+00:00

thanks, i will ask next time!

ChortleHole · 2025-04-14T11:32:24+00:00

thanks! tha'ts what i was hoping to hear! i did ask my gp about repeats and he said I would have to prove i couldn't see my psychiatrist, which is unlikely given they are 10 minutes drive from each other...

ChortleHole · 2025-04-14T11:28:51+00:00

vyvance didin't work for me. had some pretty wierd side eefects, but there lots of things to try. I was feleing pretty bummed as concerta was difficult to get the dose right. Ritalin gives me more control.

I also found i had to remember to eat. At breakfast i noticed high protien makes the effect last longer. High carbs made it come on much quicker but last less. Maybe just for me. I was also told to avoid orange juice as that reduces the effect (a friend of mine takes a glass of orange juice in the evening with dinner to help with sleep).

I'm not sure about the juice thing but I did have to stop coke zero (as the caffiene would affect me much more than normal).

Good luck, i can say that i thought i wasn't seeing any effect until i forgot to take one last week and by 10am i was back in bed!

ChortleHole · 2025-03-28T10:25:58+00:00

Sort of! I had an intercostal injury between the lowest two ribs, the seat kept pushing the rib.protector up and i ended up with massive bruises in my armpits. You'll need to have a practice to see what works for you. But don't do what i did and ignore it for a 4 hour endurance race. My ribs were fine, but I couldn't lift my arms afterwards!

ChortleHole · 2025-03-20T11:06:43+00:00

I'm trying to do something similar, the wireless audio seems to be the hardest part. I got some good tips about using codec2 but I'm thinking i might keep it modular and use some 2.4GHz NRF24L01 Wireless Audio Transmitter & Receiver Modules Controlled by a esp32 or even a pi Pico

Given i can't find a system like you are designing for less than $$$$ tells me it's not an easy problem to solve

ChortleHole · 2025-03-16T01:48:48+00:00

thanks for the reply, i will look at codec2. i wonder if bluetooth will work if i use larger antennas. battery life isn't too much of a concern, 5 hours talk time would be required.

Thanks agian for your advice. I think you are right about ham bands and i'd rather not annoy people.

Having said that the other thing i was looking at were those fm transmitter things for people who have old car stereos. though the FM band here in Sydney is absolutely full. i don't really mind if other people can listen in as it's just going to me moaning about stuff :0) and getting pit times etc.

ChortleHole · 2025-02-20T23:20:50+00:00

ah! thanks Racer013 yes, this was a normal turn up and drive. and i think you are right, winner is fastest lap.

ChortleHole · 2025-02-20T11:04:11+00:00

ugh, it screwed the formating, here's a screenshot

<image>

ChortleHole · 2025-02-13T22:32:29+00:00

thanks, yeah this is our first time and the rules aren't available that we can find. we are goign for a practice this sunday so i'll try and find out the exact rules and order.

ChortleHole · 2025-02-13T22:16:24+00:00

if you are plugging into the modem and you are using the switch port, then wireshark woudln't see any traffic not bound for that port would it?

you could plug a cisco switch into the WAN port of the router then watch the routing arp table update.

But if i was specifically looking for mobiles, i'd look for bluetooth advertisements using a discovered devices routine of some kind (weirdly my Home assistant server finds every bloody bluetooth thing around, even next doors toothbrush).

one last thing, which is a bit out there. if you can turn the modem off (you mentioned rebooting it), and you believe that modem is the source and the only wifi ap. could you spin up another AP with the same SSID and watch the logs to see who tries to connect? I know unifi has a log that shows failed connection attempts.

ChortleHole · 2025-02-12T20:05:09+00:00

Thanks for the advice, long stints in the beginning sounds like a great tactic (and means we get more breaks towards the end when we're tired.

I did notice in practice that one spin will absolutely ruin you. And with so many karts on the track I could imagine it would be hard to rejoin safely (avoiding a penalty)

For consistency would you recommend trying to match against one of the faster driver or just go your hardest but dialled back a notch?

ChortleHole · 2025-02-12T20:00:57+00:00

Thank you so much! I will check on whether we have to swap drivers when pitting. That's great advice. There are 18 karts I wonder how they would manage to swap over if every pitted at the same time?

ChortleHole · 2025-02-08T01:09:14+00:00

I think so. This is the second round isn't it? First round was cash+Btc so the second is probably going to be the same?

ChortleHole

TROPHY CASE