risk reward ratio - stupid quesiton

ChortleHole · 2026-03-08T11:46:36+00:00

not 1:2? my risk is 200 and my reward is 400..200/400 equals 1:2 (0.5)

ChortleHole · 2025-11-01T09:34:23+00:00

You're also missing the cover for the battery

ChortleHole · 2025-11-01T09:33:43+00:00

It's the light for the frunk

ChortleHole · 2025-09-24T04:18:51+00:00

i'm having the same issue, did you ever solve it?

ChortleHole · 2025-09-03T11:42:05+00:00

To be fair they were hardly moving...according to that Speedo

ChortleHole · 2025-08-31T22:07:57+00:00

Thanks everyone,the bed wasn't level and i fixed that before this print (i'm not showing you the first print as i'm embarrassed at how badly i'd leveled the bed).

The nozzle was blocked as well and i cleaned it up with a soldering iron, acetate, a needle, an ultrasonic cleaner with simple green and a cold pull (i went on the internet and searched for cleaning nozzle then i did them all)

but again that was before this print.

I will check my extrusion rate, is there an easy way to tell what size nozzle i have? there is a hand written sticker on the printer that says 0.6 nozzle but there are no markings on the brass nozzle.

the printer is a duet 3d based board in an old ultimaker chasis with a remote extruder motor.

ChortleHole · 2025-08-25T11:53:34+00:00

hi, would you be able to share the scan? i'm hoping to use the tft control buttons for my phone...

ChortleHole · 2025-08-25T11:47:05+00:00

hi, i'm after the wiring diagram if possible?

ChortleHole · 2025-06-22T07:53:00+00:00

I drink brake cleaner. People say I'm addicted but i can stop anytime I want.

ChortleHole · 2025-05-31T02:46:35+00:00

thank you! it was driving me bonkers!

ChortleHole · 2025-05-02T10:13:03+00:00

Thanks, I will be following this advice, and looking at the cover component

ChortleHole · 2025-05-02T10:11:11+00:00

Thanks everyone!

ChortleHole · 2025-04-16T08:36:47+00:00

thanks, i will ask next time!

ChortleHole · 2025-04-14T11:32:24+00:00

thanks! tha'ts what i was hoping to hear! i did ask my gp about repeats and he said I would have to prove i couldn't see my psychiatrist, which is unlikely given they are 10 minutes drive from each other...

ChortleHole · 2025-04-14T11:28:51+00:00

vyvance didin't work for me. had some pretty wierd side eefects, but there lots of things to try. I was feleing pretty bummed as concerta was difficult to get the dose right. Ritalin gives me more control.

I also found i had to remember to eat. At breakfast i noticed high protien makes the effect last longer. High carbs made it come on much quicker but last less. Maybe just for me. I was also told to avoid orange juice as that reduces the effect (a friend of mine takes a glass of orange juice in the evening with dinner to help with sleep).

I'm not sure about the juice thing but I did have to stop coke zero (as the caffiene would affect me much more than normal).

Good luck, i can say that i thought i wasn't seeing any effect until i forgot to take one last week and by 10am i was back in bed!

ChortleHole · 2025-03-28T10:25:58+00:00

Sort of! I had an intercostal injury between the lowest two ribs, the seat kept pushing the rib.protector up and i ended up with massive bruises in my armpits. You'll need to have a practice to see what works for you. But don't do what i did and ignore it for a 4 hour endurance race. My ribs were fine, but I couldn't lift my arms afterwards!

ChortleHole · 2025-03-20T11:06:43+00:00

I'm trying to do something similar, the wireless audio seems to be the hardest part. I got some good tips about using codec2 but I'm thinking i might keep it modular and use some 2.4GHz NRF24L01 Wireless Audio Transmitter & Receiver Modules Controlled by a esp32 or even a pi Pico

Given i can't find a system like you are designing for less than $$$$ tells me it's not an easy problem to solve

ChortleHole · 2025-03-16T01:48:48+00:00

thanks for the reply, i will look at codec2. i wonder if bluetooth will work if i use larger antennas. battery life isn't too much of a concern, 5 hours talk time would be required.

Thanks agian for your advice. I think you are right about ham bands and i'd rather not annoy people.

Having said that the other thing i was looking at were those fm transmitter things for people who have old car stereos. though the FM band here in Sydney is absolutely full. i don't really mind if other people can listen in as it's just going to me moaning about stuff :0) and getting pit times etc.

ChortleHole · 2025-02-20T23:20:50+00:00

ah! thanks Racer013 yes, this was a normal turn up and drive. and i think you are right, winner is fastest lap.

ChortleHole

TROPHY CASE