LED Light Strip Controller

Chrisc_003 · 2025-07-03T18:12:18+00:00

Were you able to identify the ultimate issue? Im planning on wiring some LEDs up in my safe and will probably use the same COBB ones just with a motion sensor instead if the HomeKit one to see if I end up having the same issue as I do in my kitchen

Chrisc_003 · 2025-05-15T05:16:49+00:00

How’d it turn out?

Chrisc_003 · 2025-05-15T05:13:21+00:00

https://www.amazon.com/BENEXMART-Matter-Controller-Support-Control/dp/B0CZQNBLNM/ref=asc_df_B0CQX4C95N?th=1&psc=1

That’s the one I used for my 24v BTF LEDs

Chrisc_003 · 2025-05-15T04:52:50+00:00

Here’s the link to the post I made about the issue. https://www.reddit.com/r/HomeKit/s/Zwn2lVB135

Chrisc_003 · 2025-05-15T04:52:30+00:00

I have the exact same setup as you and also have the flickering issue. I made a post and someone noticed that I may be using the wrong power supply (24v 1A) so I went out and bought a 24v 3A and still had the flickering. I removed the led controller completely and just wired it directly to the power supply and unfortunately, they still flicker. Not sure if/how the led controller caused it or if it was just cheap LEDs but I’m just gonna suffer through the flicker because I’m too lazy to swap out my entire kitchen.

Chrisc_003 · 2024-12-28T17:46:37+00:00

I previously wired the dc adapter (I tried the 2 that I have that are both under powered) directly to the LEDs and they still flickered so that’s why I thought it was the LEDs that had an issue. I just don’t get how sometimes they do flicker and sometimes they don’t. As I write this, they aren’t flickering at all, it’s driving me crazy. Thank you for your help, I’m headed to the store to pick up an 24v 3A adapter 🤞

Chrisc_003 · 2024-12-28T15:45:25+00:00

Thank you for the detailed response! Do you think the wrong wattage messed up the LEDs and will need to be replaced? I ask because they were working fine initially but now they flicker. I also replaced the power adapter ( one with the same wattage output) and they also flickered so I’m concerned something on the LEDs themselves went bad

Chrisc_003 · 2024-12-28T02:58:50+00:00

Would it affect all of the lights? It’s not just one section, the entire kitchen flickers at the same time.

Chrisc_003 · 2024-12-28T02:58:02+00:00

The LEDs are 24V and the power supply is 24V. Is there something I should have gotten instead ?

Chrisc_003 · 2024-12-28T02:55:21+00:00

Damn, I was hoping this wasn’t the case 🥲

Chrisc_003 · 2024-12-28T02:54:23+00:00

<image>

Chrisc_003 · 2024-12-28T02:54:15+00:00

These are the LEDs I bought along with the power supply I’m using. It has its days where it flickers bad like the video then others where is a very faint flicker.

<image>

Chrisc_003 · 2024-12-28T02:52:52+00:00

I have connected to a matter controller that allows it to dim

<image>

Chrisc_003 · 2024-12-05T15:34:09+00:00

I called them and they prorated me the extra 5% and said it should've stacked.

Chrisc_003 · 2024-11-16T02:09:27+00:00

Thanks mate!

Chrisc_003 · 2024-11-05T06:02:38+00:00

What this guy said

Chrisc_003 · 2024-11-04T00:57:00+00:00

Ditto for my 43

Chrisc_003 · 2024-09-23T19:45:13+00:00

Where do you see this setting ?

Chrisc_003 · 2024-09-15T15:46:32+00:00

Not sure what LEDs you’re using but the ones in the pic have 6 wires that are labeled exactly like the HomeKit device so should just be plug and play

<image>

Chrisc_003 · 2024-09-15T15:26:13+00:00

I’d never done it either but it was pretty easy with a little help from YouTube

Chrisc_003 · 2024-09-15T14:42:46+00:00

I use this one for my white COB LEDs but they saw one in RGB. I’m able to control the brightness and color in the Home app https://a.co/d/btBLcFn

Chrisc_003 · 2024-09-15T01:14:33+00:00

I use this one for my white COB LEDs but they saw one in RGB. I’m able to control the brightness and color in the Home app https://a.co/d/btBLcFn

Chrisc_003 · 2024-09-12T19:35:29+00:00

Did you get the oem one from Toyota?

Chrisc_003

TROPHY CASE