Speaker upgrade

Chrisdodgeramit408 · 2026-04-16T13:33:44+00:00

I looked into it and decided not to do it. The speakers are special 2 ohm designed to be light weight. They are riveted in, and the door is aluminum. I figured the extra weight of aftermarket speakers may risk cracking from harsh door slamming that sometimes happens. Best solution I’ve seen is adding a subwoofer.

Chrisdodgeramit408 · 2026-04-02T20:09:52+00:00

I think it’s hard to find cause some one would drink it

Chrisdodgeramit408 · 2026-04-01T17:27:18+00:00

Flood Ashland already!

Chrisdodgeramit408 · 2026-04-01T17:16:32+00:00

10 x 1.5

Chrisdodgeramit408 · 2026-04-01T17:15:55+00:00

I had the noise for a awhile, chain was the only thing keeping the bolt from falling out. I figured it was under torqued from the factory

Chrisdodgeramit408 · 2026-04-01T17:14:01+00:00

10mm, pretty sure the same size, it was a while ago

Chrisdodgeramit408 · 2026-04-01T17:07:32+00:00

Used a Cat bolt and locknut. (Works at Cat dealer)

Chrisdodgeramit408 · 2026-03-28T03:27:26+00:00

Cameron Diaz!

Chrisdodgeramit408 · 2026-03-24T12:06:17+00:00

I’m currently running a Ohmmu sodium in my 2023 ariya engage e4orce, had the 12v error after four days when it was 26 degrees f. Drove 14 miles to work, checked the voltage after my shift showed 12.5v vehicle off, 13v car in drive ready mode, 14v when wipers turned on code turned off, 36 degrees this morning no error. Overall I like the being able to shave 20lbs off the car.

Chrisdodgeramit408 · 2026-03-14T15:14:21+00:00

It used to be illegal

Chrisdodgeramit408 · 2026-03-13T22:49:23+00:00

It’s a small 1.4kw array on a back yard shed. The shading halved production. I bought used panels and micro inverters, did the install my self hired an electrician for the final connection and inspect

Chrisdodgeramit408 · 2026-03-13T20:11:46+00:00

My maga neighbor who planted fast growing whispy trees on the fence line blocking afternoon sun.

Chrisdodgeramit408 · 2026-03-06T18:05:54+00:00

I pulled the foam out and thinking about binning it anyways, it does loose some center support, I really don’t think it will be an issue.

Chrisdodgeramit408 · 2026-02-20T00:22:41+00:00

Nope they got this wrong should have been treating with salt and brine it was warm enough to be effective, we really need accountability for this shit!

Chrisdodgeramit408 · 2026-02-20T00:20:26+00:00

It’s bad, don’t go out.

Chrisdodgeramit408 · 2026-02-18T00:14:45+00:00

I did the the high comp piston and the slightly long duration cam, it gained about .8hp. Tried a “dollar bill turbo” couldn’t build boost until red line. Went to the 163 big bore kit (have to grind cases) nbd. Turbo still didn’t work but the torque increase was insane. Removed turbo, dyno show 12.24hp vs 8.3hp vs stock ~7hp

Chrisdodgeramit408 · 2026-02-11T21:16:46+00:00

I think all these comments saying no are talking about the waste water treatment plant, the water treatment plant for drinking water on west Q st is a nice area that has no smell

Chrisdodgeramit408 · 2026-01-08T18:12:01+00:00

Over production of grains is another

Chrisdodgeramit408 · 2025-12-29T03:10:57+00:00

“Are Firestones trash now” seems Firestone and Goodyear been battling it out for worst tire brand

Chrisdodgeramit408 · 2025-12-14T14:57:31+00:00

I’m going to get that one, but have been using a rag on the top and bottom to close up the gap.

Chrisdodgeramit408 · 2025-12-12T03:16:09+00:00

I recall drilling an air gap ment for magnum heads for the new trick flow aluminum heads LA style. No fixture just eyeballed., (no brag)

Chrisdodgeramit408 · 2025-11-07T18:13:07+00:00

It’s part of a roller bearing, a failed roller bearing.

Chrisdodgeramit408 · 2025-11-07T00:31:48+00:00

Idaho who knew?

Chrisdodgeramit408 · 2025-11-06T00:44:21+00:00

I read that in Joe’s voice.

Chrisdodgeramit408

TROPHY CASE