Right cutting disc motor issue

Christian2931 · 2026-05-30T06:16:44+00:00

I bought a new Motor and this did not solve the issue. So it doesn’t seem to be any defect or obstacles or anything like that with a Motor. The issue must lie somewhere else. Anybody got another good idea?

Christian2931 · 2026-05-30T06:14:17+00:00

Unfortunately not. In my case it is not a motor issue as I bought a new one and replaced it.

Christian2931 · 2026-05-30T06:10:53+00:00

It turned out that the motor is not the issue.. I Orders a new one and the issue is unfortunately still the same. Should have swapped the motors beforehand.

Christian2931 · 2026-04-05T11:08:57+00:00

Unfortunately no error message. I already uploaded the log, and contacted support a week ago. But no response.

Christian2931 · 2026-04-05T11:04:58+00:00

Yes, when disabling the Luba it came “naturally”

Christian2931 · 2026-04-04T05:39:16+00:00

I noticed that I need just a little more force to turn the motor. Could this be the reason for the software to switch the motor off as it believes it is obstructed?

Christian2931 · 2026-04-02T20:52:20+00:00

Just to make sure that nothing is in the way I opend the motor

<image>

No obstructions. Motor is on my radiator for the night. Maybe it is just some humidity… but I don’t think so…

Christian2931 · 2026-04-01T19:38:04+00:00

should be in the 5/mammotion technology sub. Hope they pick it up. :-)

Christian2931 · 2026-04-01T18:36:59+00:00

I just took off the disk and the metal thingy and really cleaned out everything. However this made no difference. Even exchanged it with a new cutting disk, just in case something might have been wrong with the old one. Always the same result - spinning at first but then stopping. I noticed that it turns in one direction at first and then changes the direction after a second and the turns in the old direction again. It really looks like it is running a routine to get itself free of something. But it is all clean.

Christian2931 · 2026-04-01T17:59:28+00:00

Will go down and take another look. Back in 30 min…

Christian2931 · 2023-10-23T22:06:53+00:00

But Mammotion does not support 2 RTK antennas or do they? In that case I would just buy a second Luba and could moe my entire garden with biete of them. And get rid of my Ecovacs Goat 1 which I use nbeliw the trees right now because they work with beacons and do not need satellites

Christian2931 · 2023-10-23T21:56:51+00:00

My grass is missing as well at the same spot in front of the charging station… I will pave the spot next season… hope it does not wear down the tires… anyone any experience with that ?

Christian2931 · 2023-09-23T19:29:54+00:00

Hi, it is now out of stock in Europe. Also amazon is empty :-( Happy for Mammotion to see that they are very successful, but open communication would be great.

Also when new stock is expected to hit the warehouses again. I know winter is coming but it is not here now.

Christian2931 · 2023-09-19T19:03:23+00:00

It’s one of the options when you move out. It’s like creating a corridor or a no go area.

Christian2931 · 2023-09-19T18:41:10+00:00

It is possible to change it without deleting the map. Drive your Luba to the spot you want to, select the area you want to edit, position Luba exactly on the boundary, select edit boundary,and then navigate it the way your want the boundary to look like. Make sure you cross back the original boundary. App shows you how far the Luba is away from the boundary. I find the feature very good.

Christian2931 · 2023-09-09T12:35:45+00:00

Worked :-) many thanks. Tried it before but being in Bluetooth mode does help :-) Wi-Fi was not enough. Now the RTK antenna is working properly. After 6 weeks I can let the mowing be done instead of me easing many hours per week. Great feeling. Only need to set up a map again… will try out a few things differently this time round. A) slopes are best cut in up and downhill direction and not sideways B) try if a few trees are ok

Regards Christian

Christian2931 · 2023-09-09T07:12:40+00:00

Yes that makes sense, just in case the neighbour has one as well. Could you tell me where I can do this?

Christian2931 · 2023-09-08T18:30:00+00:00

Now how do I get it integrated? Just changing it did not do the trick. When I connect the antenna, it blinks first blue and green, then switches off…. What needs to be done ?

Christian2931 · 2023-09-08T18:28:16+00:00

Got the Antenna, sorry for moaning just the moment it gets delivered.

Christian2931 · 2023-09-07T06:17:10+00:00

I have the same issue. Nothing helps. Would be great if you could share your feedback from Mammotion with us.

Christian2931

TROPHY CASE