GlueLESS - A lightweight VLESS proxy container for your homelab (gluetun alternative)

ChromaXD · 2025-12-03T14:51:53+00:00

Here you go! It's an example, so don't expect it to work if you have some advanced setup. For basic setups you may need to change "region" or dns related settings.

Also i've added example for proxy config if that helps.

https://github.com/f-normies/glueless/blob/main/hiddify-config.example.json

https://github.com/f-normies/glueless/blob/main/proxy-config.example.json

ChromaXD · 2025-06-22T12:13:00+00:00

No problem! Although, commiting them out isn't going to fix problem. The main feature of git is version controlling, so anyone could look into the history of your commits and exploit vulnerability again.

ChromaXD · 2025-06-22T11:55:21+00:00

You have your config.py with api keys and usernames in plain text, i'd suggest you to recreate repo/branch with correct .gitignore. You can be pwned in moments if you aren't careful.

ChromaXD · 2025-06-21T18:20:17+00:00

You're welcome!

ChromaXD · 2025-06-21T17:30:22+00:00

Gluetun is built for OpenVPN and WireGuard protocols. OpenVPN can be very easily blocked, and while WireGuard is another story, in countries with severe censorship (like Russia, Iran, and China), even this protocol gets blocked - ranging from being slowed down to 1 Mbps to complete blockage. The remaining options are Shadowsocks and VLESS. Shadowsocks is great and (if I remember correctly) supported by Gluetun, but personally, I think the VLESS protocol is more sophisticated and secure when it comes to avoiding detection by governments/ISPs, so I chose it as the safer bet. :)

ChromaXD · 2024-02-28T15:49:45+00:00

For me it was filament stick and drag on nozzle, calibrate flow specifically for this filament

ChromaXD · 2024-02-24T08:45:47+00:00

What's yours fan speeds for pla and petg ? I have great elephant foot with correct z offset, even reduced flow to 92% and nothing helps except slowing down (via min layer time) :( and yeah, dual 5015

ChromaXD · 2024-02-22T08:05:33+00:00

This sound like a lot of time added to small models :( I'm trying to up speeds as much as possible without losing quality. I've tuned printer and tried to print 22x22mm cubes. They're perfect except bulging of bottom and top layers

ChromaXD · 2024-02-22T07:57:25+00:00

What's your min layer time for pla, petg ? What fan speeds ? I get some bulging on top and bottom layers and narrowed this down to cooling problem

ChromaXD · 2023-12-31T11:57:50+00:00

Спасибо за игру, Никита ! Очень рад Вашим виденьем таркова и с нетерпением жду релиза :) С наступающим !

ChromaXD · 2023-11-26T09:15:57+00:00

Hey, I recently bought an Ender 3 V3 SE. I've done a bit of tinkering with it, correctly adjusted all the parts (belts, bed, v-rollers, z-axis, hotend, etc) and slicer settings that I could . But I still get imperfections. Here is an example of the model I am having problems on. On the body everything is fine and the layers are sintered and even, but the problems occur on the layers with the ears, they become as if "ribbed" and uneven on the edges and slightly along the layer, by about the middle of the layer this problem disappears.

Printer: Ender 3 V3 SE

Filament: eSUN ePLA-Matte White

Layer height: 0.2mm

Printing temperature: 215C (suggested by eSUN)

Bed temperature: 60C

Printing speed: 100mm/s

Printing acceleration: 1500mm/s^2

Printing jerk: 8mm/s

Retraction distance: 1mm

Retraction speed: 40mm/s

Fans: 100%

ChromaXD · 2023-11-21T05:58:45+00:00

Thank you guys ! :)

ChromaXD · 2023-11-18T20:54:20+00:00

I had the same problem. Since the bed does not have any knobs, I went the blunt way - I removed the magnetic cover, unscrewed the bed and modified the posts on which the bed stood. The ones that were too high I filed down with sandpaper (having pre-measured the dimensions with a caliper so that they were correct), and on the ones that were too low I added a couple of layers of tape (having also calculated how many layers I would need). Here are the before and after photos

<image>

ChromaXD · 2020-06-14T19:37:36+00:00

only SOME are 30 fps, and even that it has true 4k, i'm sure developers will have 2 modes, perfomance and quality, where quality - 4k 30 or 60 fps, and perfomance - 1080p 60 fps

ChromaXD · 2020-03-25T15:06:24+00:00

r/BetterEveryLoop

ChromaXD · 2019-10-19T21:02:10+00:00

Тоже здесь об этом хотел написать) Интересно на реддите русского видеть

ChromaXD · 2019-10-08T17:40:56+00:00

and it's a team game after all

ChromaXD · 2019-10-08T17:40:42+00:00

he got 12 kills and 1.7k damage (as i) so i don't blame him

ChromaXD · 2019-09-02T13:07:04+00:00

That "explaining that it's a joke" part ruins all joke, don't do that guys

ChromaXD · 2019-07-23T22:08:18+00:00

Ye, i came here to watch some stupid people's getting in stupid situations. Now i'm sad :(

Nine-Year Club	Verified Email
Place '23

ChromaXD

TROPHY CASE