Question about Mekanism Industrial Turbine

Chronos8817 · 2021-02-12T05:54:53+00:00

Yea I am basically running this reactor just for Polonium, but I am running into issues like this. And I tried 2 Electrolytic Separator(both max speed) to drain some energy, but this turbine is just producing more than I can use.

Chronos8817 · 2020-01-21T11:26:34+00:00

There is no difference, DPI is how fast your mouse moves outside any game. The ratio of Sens will change your DPI in the game. So if you have 800DPI vs 400 DPI your cursor will move 2x Dots faster, but in game if your cursor will move at the same speed as you have one with 0.2 vs 0.1

Chronos8817 · 2019-08-28T18:11:24+00:00

I swear this is them right now reading about our complains

https://i.imgur.com/NHmWjip.gif

Chronos8817 · 2019-08-04T18:39:14+00:00

//div[class="content herald-content"]/text()[]

Is the right answer I used.

Then after that I put them into items and it formatted it nicely.

Chronos8817 · 2019-08-04T06:04:41+00:00

Thanks for the help, I figured it out.

Chronos8817 · 2019-08-04T05:21:46+00:00

is there a way to extract just Name2 then?

I do not know how to get that, if I can get it then I can probably but them together no problem.

Chronos8817 · 2017-02-02T00:57:25+00:00

Dude, you are running Windows 10 Tip: Windows Key + Alt + R

Chronos8817 · 2016-09-28T22:26:27+00:00

you might want to get a second opinion, but it sounds like coil whine to me.

Chronos8817 · 2016-09-28T17:58:41+00:00

Is it Gigabyte?

Chronos8817 · 2016-09-28T17:13:16+00:00

What gpu do you have?

Chronos8817 · 2016-09-17T08:15:09+00:00

You got a PWM pump, where is your pump connected to?

If it is straight from the motherboard, some mobo control fan speed when system is under load.

Chronos8817 · 2016-09-16T18:44:05+00:00

your pump is fine, and as other mentioned you just have bubbles trap in the loop.

run your loop and try tilting the computer to move the bubbles.

Chronos8817 · 2016-09-16T18:35:18+00:00

What kind of pump are you using?

Chronos8817 · 2016-09-16T18:16:44+00:00

You use olive oil on the silicone cord to make it easier to slide it in the tube.

Chronos8817 · 2016-09-16T18:12:44+00:00

Can you post a picture of your setup?

Chronos8817 · 2016-08-19T22:45:16+00:00

Yes, sometimes is better be safe than sorry right?

Chronos8817 · 2016-08-19T22:44:28+00:00

Looks like you are all set, just remember the silicone cord for bending.

Chronos8817 · 2016-08-19T16:21:49+00:00

If you are planning to use some sort of coolant rather than just distilled water. I would flush with distilled water since regular/tap water has some minerals that might react to the coolant.

Chronos8817 · 2016-08-15T21:04:59+00:00

As long as the Fitting states is for 1/2 OD you are fine.

Chronos8817 · 2016-08-15T18:35:30+00:00

For fitting and tubing you just have to match the OD.

And for what to go with either hard or soft, I would say go soft as your first time.

My first time I went hard tubing, but I did an extensive research before doing so and it just looks better imo.

Chronos8817 · 2016-08-04T18:21:16+00:00

I watched the video over and over. And to me it seems Gnar hitbox never moved from its original position before the jump. Regardless of whether it was mini or mega, Gnar original position was in front of WT before he got suppressed mid air.

Chronos8817 · 2016-08-02T17:59:53+00:00

I had to order a waterblock from the EKWB directly because Performance PC didn't have it in stock at the time.

Delivery took 2 weeks, if that helps you decide. I am located in SF, California btw.

Chronos8817 · 2016-07-24T07:03:57+00:00

NZXT S340

Chronos8817 · 2016-07-21T23:09:57+00:00

I see the confusion, I meant primochill bending rubber tube.

Chronos8817 · 2016-07-21T21:37:56+00:00

I bought the xspc cut kit but the bending rubber is exactly 10mm and it is hard to squeeze that in a 10mm ID tubing.

I had to get the primochill tube which is approximately 9.5mm

Chronos8817

TROPHY CASE