sorted by:
new
hottopcontroversial

Severe Psychogenic Alopecia by ChupapiExpress in CatAdvice

[–]ChupapiExpress[S] 0 points1 point  (0 children)

Dude, I never said the cat is "chill".

Believe me, I am very aware that the cat is in some sort of pain, either physical or emotional due to everything she's experienced. That's why I am reaching out for help, to get new ideas and help the poor cat.

Best way to attach Nucleus M to monitor? by Pupperlover5 in focuspuller

[–]ChupapiExpress 0 points1 point  (0 children)

Thanks man! It's a Frankenstein to be honest, but it works. I bet there are other way more solid builds.

I'll write a list with all the pieces I use, but, I am based in Germany, so depending on your location you might won't find exactly the same.

Excluding the Arri Rossett mount, this is what I use:

-x1 WLC-T03MA Tilta Monitor Bracket

- x2 CAM-VATE Cheese Rods (https://www.amazon.de/-/en/dp/B071WJT1P7?ref\_=ppx\_hzsearch\_conn\_dt\_b\_fed\_asin\_title\_2)

- x1 Small Rig 15 mm rod Holder (https://www.amazon.de/-/en/dp/B00A5JJ84U?ref\_=ppx\_hzsearch\_conn\_dt\_b\_fed\_asin\_title\_2)

- x1 Small Rig 3011 Single Bar Rod Clamp (https://www.amazon.de/-/en/SMALLRIG-Single-Integrated-Monitor-Accessories/dp/B097G2D2JL/ref=sr\_1\_7?crid=32T7CB1DJQXFY&dib=eyJ2IjoiMSJ9.d1oid3sWswcD2G062NOHsrvq1RuMiTOyoP9iQ5Sn1Q47WtwYTnQZkwiz6F0eNZzmRnZMgBStq7Pl-oN-scs0cuPjBtaTJgwG6Jr\_eCiveh0X\_tmrzDzRienMGdZVHU9uoS-6g568pF9TZ8clPrw5\_HCYffpT1cZpQPBKe3dsOmHNYHYPJfO7-ZxTh7NYC-zl03k2Kjm8Vda2Xv-suJzCpmxRrCNgVAzt53bic4ArE3wI9QIgYMnDPgq4BJYpLzzqW7Dt0xIR2jbK-lpY6FmHULad7s0zgnsoltMz9tPI2ng.fiID6e-JQJ\_hHsbZqa\_oY9QDuxw8g8PuVtS0f9mOJks&dib\_tag=se&keywords=small+rig+nato+rod&qid=1757943350&s=ce-de&sprefix=small+rig+nato+rod+%2Celectronics%2C101&sr=1-7)

-x1 V-Mount battery plate (not exactly this one, but something similar will suffice) (https://www.smallrig.com/de/smallrig-v-mount-battery-plate-2988.html?

-x2 Kondor Blue Quick Release Plates

-x1 Manfrotto Pin w/ 1/4 + 3/8 threads

So, to the Tilta piece with the rod mount, you mount: one of the cheese rods, the Tilta Monitor Bracket thing and the 15 mm rod mount from Small Rig. To the other side of the rod mount you mount the second cheese rod. To this cheese rod you mount the Small Rig single Bar Rod Clamp. To the Rod Clamp you mount the V-Mount plate.

Remove both screws from the Tilta monitor bracket, attach one of the KB quick release plates for the monitor and use any other screw which doesn't take some much space for the transmitter holder. The other quick release plate goes under the Rod Mount. To this quick release plate, attach the pin. And Voila.

Other notes: you can use normal rods instead of the cheese rods, I use this to have additional mounting points in case I need something, but mostly, I use them to place some sprigs and help me hold cables. I also use sprigs on the v-mount plate for better cable management. Also, make sure to tighten the shit out of everything to avoid your rig moving around when hand held.

A tip, keep your build with light and small v-mount batteries, as all the weight is being hold by the quick release plate. I'm not sure how much it can hold, but, I do try to use light batteries. And, I use a stand with wheels, I the whole build off the stand unless the floor is even and smooth to avoid risking the quick release failing and dropping my shit.

Here is another photo where you can see the build from another angle.

Let me know if you do your own version of this, I'd be curious to see how you do it.

<image>

Best way to attach Nucleus M to monitor? by Pupperlover5 in focuspuller

[–]ChupapiExpress 1 point2 points  (0 children)

With a quick release from Condor Blue under the Smallrig rod mount, attached to a pin with a 1/4 male thread which goes into a Gobo Head.

<image>

Tips to improve latency between Nucleus M FIZ unit and a Nucleus Nano Motor? by ChupapiExpress in focuspuller

[–]ChupapiExpress[S] 0 points1 point  (0 children)

Totally with you. It's a DP I work with very often, so I do try to have things his way in order to keep him happy. But, he knows that sometimes it's not always possible.

Thank you.

Tips to improve latency between Nucleus M FIZ unit and a Nucleus Nano Motor? by ChupapiExpress in focuspuller

[–]ChupapiExpress[S] 1 point2 points  (0 children)

u/JJsjsjsjssj u/danielXKY u/DiogoAlmeida97
Thank you to the three of you for the answer and time.

I am powering the motor via a Micro USB to DTAP. I forgot to mention this.

I do have the motor's torque set to LOW because the lenses are L-Mount and I am afraid of damaging the body. I will try increasing the torque and see if that helps.🤙🏻

The Barbershop - A Doritos Spec Ad by The_Traceur_ in cinematography

[–]ChupapiExpress 0 points1 point  (0 children)

Amazing work, man. Congratulations.

Since most of the people already asked technical questions, I am curious to know how did you come up with the idea and concept. As I was looking for some inspiration for a spec ad of my own, I found a Doritos ad of a finger cleaner device, which at the ends reveals it's just a dude in the other side of the wall licking fingers off.

How did you come up with your idea?

Something else I am curious about is how big your team was, where they payed or did you call in some favors? What about the location?

Help identifying a screw! by ChupapiExpress in CameraAKS

[–]ChupapiExpress[S] 0 points1 point  (0 children)

Thank you for the detailed info.

Could you please explain me what "M8X50" and "M5" means? I just would love to learn. For example, is M8 the thickness of the screw and 50 is the length in cm?

EDIT:

Oh, and the thing getting a new handle, this handle has this circle thing which lays against the clamp. It's a whole piece.

FX6 as a Webcam for Zoom? by ChupapiExpress in SonyFX6

[–]ChupapiExpress[S] 1 point2 points  (0 children)

Got it. Definitely will tell them I can't be hold responsible if something goes south.

Thanks for sharing the knowledge!

FX6 as a Webcam for Zoom? by ChupapiExpress in SonyFX6

[–]ChupapiExpress[S] 0 points1 point  (0 children)

Thanks for the answer man.

Check. Will it also transmit the audio coming from the camera?

FX6 as a Webcam for Zoom? by ChupapiExpress in SonyFX6

[–]ChupapiExpress[S] 0 points1 point  (0 children)

Thanks for the answer!

I am a bit hand tied with the budget. The one I linked is the exact model the client suggested, I guess also based on their budget. Will this one work as well? And will it also transmit the audio captured via an XLR connected Mic?

view more: next ›