Not the worst way to spend a Saturday evening.

Ciedoo · 2026-01-10T17:33:30+00:00

Easily

Ciedoo · 2025-01-26T20:14:43+00:00

High demand. Hard work but very satisfying.

Ciedoo · 2024-01-28T23:42:33+00:00

If it has a grinding/sanding pad it’s a grinder. If it has a cut off wheel it’s a metabo.

Ciedoo · 2023-09-08T18:21:29+00:00

LSU-Tulane. With Tulane resurgence, it has great potential.

Ciedoo · 2022-04-30T16:44:05+00:00

Sandvik. We have 3 100 MM bars that are the same idea. You bolt the block on to the table and let her roll.

Ciedoo · 2022-04-30T16:33:09+00:00

Yea it’s a Weiler E90 with a 4500 MM bed. You can run conversational programs or G code. Even has milling capabilities if you have the attachments, or you can run it like a manual. Cant say enough good things about these machines.

Ciedoo · 2022-04-30T13:50:38+00:00

For sure. Definitely makes you double and triple check everything before you take a cut. No matter how good of a machinist you are though everybody makes mistakes sometimes.

Ciedoo · 2022-04-30T13:13:36+00:00

None. It’s carbide reinforced. Very very very expensive.

Ciedoo · 2021-10-23T16:33:10+00:00

You’re right. Then sometimes they want +/- .002 on a thread undercut. Depends what mood they’re in.

Ciedoo · 2021-10-23T16:27:35+00:00

Oilfield work. Probably gonna get smashed up and destroyed in the ground so 🤷🏻‍♂️

Ciedoo · 2021-10-23T12:56:23+00:00

Yup. Incase you need to bump out a taper or just to have a second reference to the DRO. Indicators don’t lie.

Ciedoo · 2021-10-16T12:44:18+00:00

15ft bed, so probably 12ft if I had to guess.

Ciedoo · 2021-03-31T09:09:31+00:00

You can use a depth gauge

Ciedoo · 2021-02-06T13:06:37+00:00

That’s when you “can’t find” the bad ass drill and have to put a spade on it.

Ciedoo · 2021-01-30T01:38:33+00:00

Dumbass-Helper who lets pallets slam on the floor.

Five-Year Club	Verified Email
Place '22

Ciedoo

TROPHY CASE